Very helpful, thank you! Fyi dont use pipe for a TUBE chassis. Pipes are made to flow inside. Tubes are made to be structurally optimised. Tight tolerance inside vs outside.
Great tutorial! It opens my door to structural elements, I have in mind to do a rollcage with this tool. If you need any help from a student of mechanical engineering really motivated and with medium knowledge of Creo 2.0 and Solidworks, let me know and we keep in contact! Best regards and great channel!!
I have two tubes identical diameter in two places in 3D space, how would one connect a sketch line between them??? It will not highlight or identify the center point of the cylinders even though the center line is visible. I can get close... but cannot snap to it. Any ideas? I swear the people that make this software leave MUCH to be desired when it comes to common sense..... I even generated a plane along their axis so I can simply draw 2D on the plane, but it still refuses to snap to the centerpoints! I have never gotten enraged at any software learning curve as much as this one...... Frankly I don't understand why I can't rotate the object in 3D space, select the end of the cylinder as my plane, then select centerpoint using the line sketch tool..... then rotate the object to the other cylinder face and repeat.... voila a line between them. But I can't. Several days trying to learn this and it just doesn't make any sense to me.
Print with a 2D printer? I think the easiest for me is to model the notches and put them in a drawing and print at a 1:1 scale to ensure you have the right size. There probably is a way to do it with a sketch but my workflows have always concerned drawings
Alex Varela Hey there Alex. You can right click on the Menu and select "Weldments". I put a video about it here. Let me know if that doesn't work. Best Regards th-cam.com/video/ckBF3O2z59U/w-d-xo.html
when i use this structure into ansys workbench analysis, ansys not consider whole body for analysis, ansys only consider that element which are in contact with the force. can you please tell me the way to analyse this type of problem in ansys as a complete element, i preparing for SAE baja event frame design so i stuck in that part. can you please inform as early as possible
Why do incomplete video? Also make a drawing for each tube with dimensions and end finishes. It is uselesss to play and draw with sketch. you can do nothing more than print it out and hang it on the wall.
Very helpful, thank you!
Fyi dont use pipe for a TUBE chassis. Pipes are made to flow inside. Tubes are made to be structurally optimised. Tight tolerance inside vs outside.
Excellent video! You won a subscription
thanks buddy, it helped me a lot
From here: how do you make the cutting templates for the tube notching?
Thank you buddy, it helps a lot
This was really helpful. Thanks.
+Vithesh Rajan
My pleasure, thank you.
Thank you so much!
Aaron Cassius
My pleasure, glad I could be of help.
Thank you!
cheers for the help
Thank you Sir.
good basic understanding video
This video is really helpful although can you do a video on car frame
رائع جدا
Thanks a lot!
Great tutorial! It opens my door to structural elements, I have in mind to do a rollcage with this tool. If you need any help from a student of mechanical engineering really motivated and with medium knowledge of Creo 2.0 and Solidworks, let me know and we keep in contact!
Best regards and great channel!!
did you graduate
thanks for the tutorial,,,,
if I draw a circle and want to convert it into pipe with the structural member, it does not work,. thanks for your help.
I have two tubes identical diameter in two places in 3D space, how would one connect a sketch line between them??? It will not highlight or identify the center point of the cylinders even though the center line is visible. I can get close... but cannot snap to it. Any ideas? I swear the people that make this software leave MUCH to be desired when it comes to common sense..... I even generated a plane along their axis so I can simply draw 2D on the plane, but it still refuses to snap to the centerpoints! I have never gotten enraged at any software learning curve as much as this one...... Frankly I don't understand why I can't rotate the object in 3D space, select the end of the cylinder as my plane, then select centerpoint using the line sketch tool..... then rotate the object to the other cylinder face and repeat.... voila a line between them. But I can't. Several days trying to learn this and it just doesn't make any sense to me.
Can you make a video making a round tubular frame?
thanks
Can you adjust the amount of fillet on a weld?
great video but can I ask man what kind if engineer are you?
How to unbend this frame
hi it is a great help, but i'm not able to change the origins orientation with tab key.
using solidworks premium 2016
use the Shift key instead
for some reason i cant select the path segments for group 2(was able to only select 1 out of the 4), can anyone help me?
Is it possible to print out a tube end notching template from the Solid Works sketch?
Print with a 2D printer? I think the easiest for me is to model the notches and put them in a drawing and print at a 1:1 scale to ensure you have the right size. There probably is a way to do it with a sketch but my workflows have always concerned drawings
Joko Engineeringhelp Thanks for the reply. Yes a 2D printed paper template that can be wrapped around the metal tube end as a notching guide.
hey there i have a problem i have solid works 2012 premium I don´t know where to find weldments
Alex Varela
Hey there Alex. You can right click on the Menu and select "Weldments". I put a video about it here. Let me know if that doesn't work. Best Regards
th-cam.com/video/ckBF3O2z59U/w-d-xo.html
My software does not bring up relations in 3D. do you know why ?
Never heard of that before. Are there any existing relations if you right click on a sketch entity and select display/delete relations?
when i use this structure into ansys workbench analysis, ansys not consider whole body for analysis, ansys only consider that element which are in contact with the force. can you please tell me the way to analyse this type of problem in ansys as a complete element, i preparing for SAE baja event frame design so i stuck in that part. can you please inform as early as possible
Khan abdul qadir
Apologies, I have not used ansys.
Why do incomplete video? Also make a drawing for each tube with dimensions and end finishes. It is uselesss to play and draw with sketch. you can do nothing more than print it out and hang it on the wall.