GOOSKY RS4 Build Part 2
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- In this video we get part 2 done on the Goosky RS4! Such a awesome kit and goes together very well! The fir and finish is perfect! Can’t wait for the maiden flight!
Get your GOOSKY RS4 here! www.helidirect...
Want to support me? Here is my patreon! patreon.com/us...
Want to send a one time donation? Here is my PayPal!
Choppers992@hotmail.com
Want me to build your heli? Need one rebuilt or setup? Want to send something to the channel? Send me a email!
westhobbiesrc@hotmail.com
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
They should assemble them, 1 bowl rice 1/2 fishead.
Hello Jeff,
I have the Goosky S2 and love it. I am still learning my orientations but I need something bigger because my eighty year old aging eyes have difficulty seeing this little bird if it gets too far away. I am on the fence for the SAB 420, Goosky RS4 and the OMP M4 when it makes it debut. Are you at all concerned about the fact that the tail grips do not have thrust bearing in them and there is a lot of plastic in that area unlike the SAB 420. Love all your videos and I watch everyone of them. You are a terrific asset to the Heli community (and to me also lol). 🧙♂
Thank you very much Fish appoint I am so glad the bills are helpful and you enjoy them! I am not worried about plastic and there being no rush bearings in the tail grips. It is definitely a little weird lol but not worried, there has been multiple helicopter brands that don’t use thrust bearing in the tail grips. Know if this is going to be your first helicopter build I think either one of those three options are great. The RAW 420 is a faster build for sure but you can’t beat the price of this Goosky! It’s really a awesome price for what you get!
Hi Jeff, when I built mine the T/R pulley came with 2 shims. I ended up using 1 shim to remove the slop between the bearings and the pulley. Did u end up using the shims as well? Was not mentioned in the build part 2.
Hi jeff, would the rs4 legend work with vbar neo fbl unit using the mikado vclassic tx? Just wondering as i have the rs4 on the gts flb unit and am wanting to put vbar fbl unit in. Your info and advise would be gratefully appreciated jeff. Thank you 😊 👌👍🏻
Anther great video, and my RS4 is almost done. The speed controller that came in my kit is different then the one in your kit 5(60amp Hobby Wing and Goosky branded). It has battery and motor lead wires with plugs and what i believe might be a blue tooth modal but the manual doesn't say anything about it.
Time for part 3!
Oh wow! That’s great to hear. I wish mine came with the Hobbywing/Goosky ESC. Thank you for watching these videos!
Hi Jeff, I am again. In page 20 (step 14) of the manual, I see a picture showing that the distance between the 2 holes of the servo arm (of the tail servo) must be 15mm. I got confusing because in the time 6m:06s of your video you said 9.5 mm. Could you confirm this please?
So, there was a update. When I built this one (filmed this series) it was 9.5mm but since have found going to 13-15mm is better for tail performance and tail hold. So I would go 13-15mm.
Hi Jeff, in the bag with the tail pulley there are two washers of about 6 (inner diameter)x8 (outer diameter)x0.2. Do you received this? I don't know where to use this.
Hello! Yes I did, those are for shimmering if need be. My kit did not need shimming (of the tail shaft)
it would have been nice if the bags of sw were labeled also like 1.5-2.0 ect
Yes it would be! I asked them to do that a while ago. Guess they never did.
would it be a good to decal one side to show what way it is facing in the air?
That can definitely help, I know on my RAW 580 I have two different color frame stickers and I can see it really good in flight but that’s the only heli I have that on.
Super video, i am not so good. But i have 1❤❤❤
Thank you! I hope you enjoy the video! You will love this heli!
I like the "loctite" reminders :) On another note, do you pre center the servos before installing the arms? (with loctite)
I like to remind everyone to use Loctite lol that way somebody can’t say I followed your videos and it came apart but they didn’t use Loctite. No, I just put the servo horn on what I felt was center and hopefully it’s right. If not I’ll pull them and recenter.
what micrlub 261 alternative you recommend ?
should we have left over hardware ?????!!!!!!! 😮
Another terrific day of wrenching on the GOOSKY S4. I'm waiting to see if the Wire lengths are Perfect or need a little shortening, Jeff. We'll Done my friend, get the shrink tubing ready and see you tomorrow. Best to You, your Mrs. and your little Angel and to Dad, Grandma, and Grandpa! Enjoy your Sunday.
Thank you Larry! I hope you’re having a great Sunday! And you and the family are doing very well. You already know the wires got shortened and everything covered and heat shrink lol that will be in tomorrow’s video! Finishing it up now then editing!
Whoaaaaaa damn I'm too late
diy non-ac inverter dc motor as brushless hall-effect dc motor (rim axial or radial wire coils, perpendicular permanent magnet on the spinning rotor axle, yes diy the whole simple brushless dc motor)
you need only the magnets (iron/ceramic/permanent) and the wire coil, then feed direct current from battery through a variable resistor directly
generic function schematic on my channel and renders of the produced form of the motor-generator (no motor controller required and no inverter in the motor/control circuit required)
damn rc helis really changed since our days back in 2008/2015
Yes they have! Big time!
I started working on my helis again they need some tlc from sitting for such a long time the one I thought May of been a hirobo is actually a m.a. xcell 60 has the rotating servo in the center thinking that’s gonna be the one I start with first less aggressive then the raptor 90. I’m just cleaning them up now gonna test the electronics if I can get the batteries charged up and working may have to get some new batteries just to be safe tho.
I would 110% replace those batteries with new ones! Do not trust them especially if they are NiCad or nickel metal hydride! I actually had a Lipo failure today resulting in a crash from a receiver pack going dead in flight. Video will be out soon! It is not a good feeling when you lost all power to your model especially with a Nitro. I’ve got a Xcell fury 90 I’m going to restore on the channel soon!
Good looking heli, the build seems fairly straightforward. How would you compare this build to the Raw 420?
It is a pretty straightforward build! The raw 420 definitely builds faster and has a better wiring layout. but it’s a great Heli for the price!
Another great video, Jeff! Looks like the rs4 is going to be great. Although I'd prefer to throw torq servos (obviously can't do any other servo than goosky with that design) and ikon2 on it, it's really hard not to go with the pnp at that low price! That tail boom definitely needs a yellow wrap! Having their web address on the boom just seems tacky to me.
I’m with you! Definitely needs a iKon 2 but the stock FBL unit is very nice and fully adjustable! Witch is nice as well. Definitely gotta wrap the boom, I’ll be wrapping mine soon with a surprise! Stay tuned! It won’t say GOOSKY.COM but will say something .com! 😀
Great Vid 👍🏻 Question Main rotor clock wise Tail anti clock wise, Is it best to have tail anti clock wise?
Thank you! Yes the main rotor always spins clockwise and the tail counterclockwise. The reasoning for the tail spinning counterclockwise is to get the air movement away from the main rotor wash. It depends on the direction of your main road or if your main rotor spins counterclockwise then your tail rotor will spin clockwise.
@@westhobbiesrc8051
Thank you I always wondered about the reasoning behind that. 👍🏻
I have yet to see parts available for it
Parts are not available yet but when the kits are in stock and being shipped out to customers they will be available.
Love the Goosky helis. On a side note - Locktite should go in the hole, not the pole.
I have one on order... nice video
Awesome! Enjoy it!
Does it work with DSMX receiver from Spektrum? Thanks
Yes, watch the FBL and radio set up video that was posted yesterday. You add DSMX satellite.
@@westhobbiesrc8051 Thank you very much for the videos. They are help me a lot. Do you know if DSM2 will work fine?
@@ademirribeiro1580 thank you for watching, I’m glad the videos are helpful! Yes, it works with DSM2/DSMX
@@westhobbiesrc8051 Great, many thanks. But (sorry for this) I have another question: Do I need the receiver or only the Satellite does the job?
@@ademirribeiro1580 you only need a DSM2/DSMX satellite. That’s all I use on mine. Never had a problem, got many many flights on it now!
Very nice
Thank you!
Yesss, part 2!
Last build video will be out tomorrow!
Looking good so far.
Thank you!
Cool Heli !!
Yes it is!