Your oil leak at the steering arm , try tightning the 4 bolts first , there is a gasket behind the circular hold down ring . Pop the ring off and use it as a template to make a new gasket .
When you replace those gaskets on steering box, after you remove those big nuts that holds the Pitman arms on the shaft. USE A CENTER PUNCH to make a mark on Both the shaft and the Pitman Arm ON BOTH SIDES of steering box so that when reassembling they will be in the correct position. Those arms and shaft has fine splines that are tapered and will most likely need a puller to get the Arms off the shaft. Also there are seals in the covers where the shaft for the Pitman Arms comes out of the steering box that will need to be replaced, may as well do it when replacing the gaskets.
You can fill that steering box with John Deere corn head grease and it won't leak very damn much after that and use it for a long time it's like Snapper "00" grease.
Reseal after cleaning steering box, pack all gear ends with fresh grease and watch how the Armstrong steering unit turns then. The left rear rim needed that valve stem replaced first but could be just the schrader valve itself.
When I used to do tire work at tire please and family junkyard did at least 100 tires we at the junkyard and we all way keep a lot around some time we had to pull a tire and rim for a customer and if it just needs the vale we replace with used one
Troy, good decision. Since investing in cryptocurrency is extremely risky. One question... Do you have to convert the cryptocurrency to real money before paying the bills?
@@TheDoItYourselfWorld there cheep A ABIGAIL Front End Service Tools Set 5pcs Ball Joint Separator for Pitman Arm Tie Rod Puller with Red Suitcase Universal Use 4.5 out of 5 stars 192 $49.99
Your oil leak at the steering arm , try tightning the 4 bolts first , there is a gasket behind the circular hold down ring . Pop the ring off and use it as a template to make a new gasket .
Thanks. I still have not fixed this. Sadly the steering gearbox broke last season.
When you replace those gaskets on steering box, after you remove those big nuts that holds the Pitman arms on the shaft. USE A CENTER PUNCH to make a mark on Both the shaft and the Pitman Arm ON BOTH SIDES of steering box so that when reassembling they will be in the correct position. Those arms and shaft has fine splines that are tapered and will most likely need a puller to get the Arms off the shaft. Also there are seals in the covers where the shaft for the Pitman Arms comes out of the steering box that will need to be replaced, may as well do it when replacing the gaskets.
Yes like a timing chain gear set
Just what I needed to watch. I have the same problem on my ‘52.
I hope you install an override clutch adapter in that PTO output. 😉
Where do you order your seals from?
i have steering shaft problems need parts for 8n early. and rebuild videos
Did you ever get your 100k plaque from TH-cam
Yes, long ago. I made a video unboxing it.
@@TheDoItYourselfWorld thought I’d seen All your videos
You can fill that steering box with John Deere corn head grease and it won't leak very damn much after that and use it for a long time it's like Snapper "00" grease.
Reseal after cleaning steering box, pack all gear ends with fresh grease and watch how the Armstrong steering unit turns then. The left rear rim needed that valve stem replaced first but could be just the schrader valve itself.
When I used to do tire work at tire please and family junkyard did at least 100 tires we at the junkyard and we all way keep a lot around some time we had to pull a tire and rim for a customer and if it just needs the vale we replace with used one
The left side was not leaking anymore because the oil lever is now below the seal-or walrus...
Nice find. Seems like a good tractor.
Thank you for this video :-) 👍🚜👍
Brother there’s good money in fixing and flipping old tractors.👍👍
yes there is
you should be a billionaire with your early start with cryptocurrency ???? (darn it i should of 4 -3years ago) tell us what's going on brother?
I never invested tho. I use it to pay the bills, which it does well.
Troy, good decision. Since investing in cryptocurrency is extremely risky. One question... Do you have to convert the cryptocurrency to real money before paying the bills?
Cool tractor👍
yes i love them
Good job , I have tractor kinda the same year
your going to need a pitman arm pill for it
Thats what I fear.
@@TheDoItYourselfWorld there cheep A ABIGAIL Front End Service Tools Set 5pcs Ball Joint Separator for Pitman Arm Tie Rod Puller with Red Suitcase Universal Use
4.5 out of 5 stars 192
$49.99
@@TheDoItYourselfWorld amazon