Bruh, I installed a Hybrid in my HK416 and I honestly had to drop the ROF setting to -30%. It's insane how much it adds on 11.1v Li-po. I want my ROF to be the realistic 15-ish shots per second. Probably still a bit too fast. Also programming the Hybrid is a breeze. Never liked GATE stuff (need a separate gadget to program a mosfet wth?), and never will buy one again because Perun is simply superior EDIT: On top of the hybrid ROF; my set-up is 16:1 gears and I have M110 spring. I hit 1.63 joules with 0.32s (just under DMR limit where I'm from) and max range with Maple Leaf MR is 230 feet and more if I mortar it, accurate to 200 (can hit a man-sized target repeatedly). It's a 130 euro Double Bell and I threw like 400 euros inside it :'D talk about a sleeper. Took 6 months of testing to get it perfect and now it's a monster.
The Perun V2/3 Hybrid is the only mosfet i put in builds now, they're great. Be careful routing the signal wire near the trigger pin hole, I have torn one in half inserting it before.
Glad you liked it! You don't need the spring. The spring is only there to help with the cut off lever, as the cut off is gone, it's no longer needed. So it can be added to your pile of left overs! Hope that helps! Pheas
Nice video. Shows just how fiddly mosfet installations can be and how long it takes even a decent tech to install one. Yes tech fees can be high but this is why. Oh next order you make remind me and I'll drop in a set of helping hands for you. Was hurting me seeing you have to keep that rear wire in place 🙂
I have two specna arms one is the sa-c22 and the other is an sa-c 12 paw both are decent I hpad the sa-c22 but the paw I just chucked a new hop rubber in and it’s a decent gun stock before I changed the hop rubber
Glad you are liking them. The tune up services, seem to be ok value for money, on cymas i probably wouldnt bother, but on something like a double bell, probably worth it as some of their shimming is questionable, so likely to help. Especially if you cant/ dont want to do those things yourself, then probably worth just paying them to do it for you and then its good to go. Pheas
I have a SA-C13 And ive noticed it locks up in seni occasionally and i have to flick it to auto then back to semi, what do you think the problem could be?
Hello, glad you liked it. HPA is defo something I'm interested in doing for the channel and building towards. If people are more interested in the v3 stuff than 2 then I will make that more if a priority
Doubt you'll see this after 2 years, but I'm finding an issue where the pistol grips of some of my guns aren't wide enough to fit the wider wiring of the Perun v2 hybrid, rendering the gun useles as the motor can't sit properly. I don't suppose you know what pistol grip was on the gun you did the installation on as I'm struggling to find any information about this online?
@@corvo_1776 hello! This was the stock specna pistol grip fitted on this. Do you know what brand of pistol grip / aeg yours is? As I've never had issues like that before. Always found it to be thin and easy to fit in. Pheas
@@PheasAirsoft so the only brand of pistol grip I've found to work has been the one which comes with the Lancer tactical LT-35, M4 pistol grips from TM, Cyma and Golden eagle have all shared the same issue I mentioned which I thought was strange
Specna Edge series seem pretty good. I have two of them and have done for about a year. No issues so far! I would like to ask though because I get mixed messages from Google. Can you use an 11.1 with it safely?
Hello! Yes you can use an 11.1v with them safely. The edge and core series seem to get decent recommendations , especially of late. I do need to get one in soon to unbox! Pheas
I am attempting to install mine on a CYMA M4 but I have an issue with the trigger not sitting correctly. It says that the magnet holder/pin should be resting on a small pillar yet, after a a couple trigger pulls it moves from place and now rests ontop of the pillar and creates some sort of resistance and causes the plastic to wear down. Any sort of suggestions?
Hello! That's unusual the pillar in the gb shell is usually on spec in a Cyma. Just to check... this is happening with the shell closed up properly?? The only thing off top of my head I can think of is to maybe add something to the back of the magnet holder or the top of the pillar to make the contact area larger to it cant lift onto the top of the pillar.. Oh wait the other thing you COULD try is shimming the trigger down in to the left of the gearbox (forcing down close to the pillar and keeping it down as there may be side to side movement in trigger which could be causing this. Hope one of those helps! Pheas
@@PheasAirsoft Hi Pheas, so I have closed it but I haven’t added any screws in yet, but it seems like the tension of the spring and trigger causes is to move up and ontop of the pillar rather than stay put. I’ll try it again with some screws to see if that creates enough pressure to keep it in place
Hello! The yellow/green is a cycle detention failure. This could be down to the gear having too much grease on it, could be the MOSFET sat not quite in the right place or it could be grease on the sensor. I would check those.. probably do the grease between the teeth first, then the grease on the sensor, then the positioning. That should resolve it. Pheas
@PheasAirsoft will give that a shot. Ive wipe sensors free of any possible grease and the gears got minimal. Im wanting to say it could be may sector gear isnt shimmed properly or maybe PME.
Have cleaned sensors and teeth from heavy grease. Still having the same issue. Im stumped it willvfire 3 times rhen flash green/yellow then will allow me to pull trigger again after a short delay then it fires 3 times and then yello/green light. Ive checked everything in my knowledge but still stumped
@@SeanFirestone The only 2 things I can think of then are that the sensor is damaged OR more likely: the whole board is slightly out of position. I would losen the screw that retains it, move it up / towards the gear. Then screw it back down and try again. if that doesnt work then it could be the sensor is damaged. Pheas
![[UNBOXING] [REVIEW] Perun V2 Hybrid Mosfet - Programmable mosfet that delivers!](http://i.ytimg.com/vi/A3vscIF4vz0/mqdefault.jpg)
![[UNBOXING] [REVIEW] Perun V2 Hybrid Mosfet - Programmable mosfet that delivers!](/img/tr.png)
This is so much better than peruns official video I went off there video and my mosfet and motor blew up
Mine literally came in the post today and I see this video has come out. Perfect 👍
Glad it could drop just in time to help you out!! Pheas
amazing timing! been looking into a perun V2 hybrid project recently. great info
Bruh, I installed a Hybrid in my HK416 and I honestly had to drop the ROF setting to -30%. It's insane how much it adds on 11.1v Li-po. I want my ROF to be the realistic 15-ish shots per second. Probably still a bit too fast. Also programming the Hybrid is a breeze. Never liked GATE stuff (need a separate gadget to program a mosfet wth?), and never will buy one again because Perun is simply superior
EDIT: On top of the hybrid ROF; my set-up is 16:1 gears and I have M110 spring. I hit 1.63 joules with 0.32s (just under DMR limit where I'm from) and max range with Maple Leaf MR is 230 feet and more if I mortar it, accurate to 200 (can hit a man-sized target repeatedly). It's a 130 euro Double Bell and I threw like 400 euros inside it :'D talk about a sleeper. Took 6 months of testing to get it perfect and now it's a monster.
The Perun V2/3 Hybrid is the only mosfet i put in builds now, they're great. Be careful routing the signal wire near the trigger pin hole, I have torn one in half inserting it before.
Pain!! I bet that was annoying as hell when you did it! Pheas
Congrats, great how to do video! I have a G&G CM16 and I want to upgrade it with this Perun, your video makes me more confident to do it.
Fabulous video, better than peruns own video too! One question though, what about the selector plate spring?
Glad you liked it! You don't need the spring. The spring is only there to help with the cut off lever, as the cut off is gone, it's no longer needed. So it can be added to your pile of left overs! Hope that helps! Pheas
great vid mate 👏
nice talk through for the whole fitting .makes the process seem easy to tackle for the novice ,
Nice video. Shows just how fiddly mosfet installations can be and how long it takes even a decent tech to install one. Yes tech fees can be high but this is why. Oh next order you make remind me and I'll drop in a set of helping hands for you. Was hurting me seeing you have to keep that rear wire in place 🙂
They can be fiddly! and stressy ha ha! Thank you for the helping hands! I have a few bits I am build an order for!! Love your store! Pheas
@@PheasAirsoft Make sure you put a note, or swing by FB and say hi
I have two specna arms one is the sa-c22 and the other is an sa-c 12 paw both are decent I hpad the sa-c22 but the paw I just chucked a new hop rubber in and it’s a decent gun stock before I changed the hop rubber
Great video!
could i just enquire which motor you are using in this gun?
Hello! It's an asg boost motor that the customer supplied for fitting into the aeg. Pheas
@@PheasAirsoft thank you
Love the videos thanks man have a question what is your opinion about the tune-up service at Taiwan gun is it worth it
Glad you are liking them. The tune up services, seem to be ok value for money, on cymas i probably wouldnt bother, but on something like a double bell, probably worth it as some of their shimming is questionable, so likely to help. Especially if you cant/ dont want to do those things yourself, then probably worth just paying them to do it for you and then its good to go. Pheas
I do love airguns and subscribe this channel.
BTW, where the stock has gone?
From t2bkk channel in Bangkok Thailand
I sent it to pheas with the stock removed, easier for space when shipping
I have a SA-C13 And ive noticed it locks up in seni occasionally and i have to flick it to auto then back to semi, what do you think the problem could be?
Same problem, figure it out?
great video....i hope in future will get some HPA in a V3 gearbox.
Hello, glad you liked it. HPA is defo something I'm interested in doing for the channel and building towards. If people are more interested in the v3 stuff than 2 then I will make that more if a priority
@@PheasAirsoft appreciate that, guess there is a lot off videos about V2 , not for V3's...and specially narrated by your way :D
Doubt you'll see this after 2 years, but I'm finding an issue where the pistol grips of some of my guns aren't wide enough to fit the wider wiring of the Perun v2 hybrid, rendering the gun useles as the motor can't sit properly. I don't suppose you know what pistol grip was on the gun you did the installation on as I'm struggling to find any information about this online?
@@corvo_1776 hello! This was the stock specna pistol grip fitted on this. Do you know what brand of pistol grip / aeg yours is? As I've never had issues like that before. Always found it to be thin and easy to fit in. Pheas
@@PheasAirsoft so the only brand of pistol grip I've found to work has been the one which comes with the Lancer tactical LT-35, M4 pistol grips from TM, Cyma and Golden eagle have all shared the same issue I mentioned which I thought was strange
@@corvo_1776 iot all sounds very very strange does that. I havent had an issue fitting one yet. Pheas
Specna Edge series seem pretty good. I have two of them and have done for about a year. No issues so far! I would like to ask though because I get mixed messages from Google. Can you use an 11.1 with it safely?
Hello! Yes you can use an 11.1v with them safely. The edge and core series seem to get decent recommendations , especially of late. I do need to get one in soon to unbox! Pheas
@@PheasAirsoft they are super solid. Keep up the good work pheas!
When I put my gun on semi it shoots full auto what do I do?
You need to look at the selector arrangement, as I'm guessing it's not lined up properly to get the right settings. Pheas
@PheasAirsoft Thanks that was the problem
I am attempting to install mine on a CYMA M4 but I have an issue with the trigger not sitting correctly. It says that the magnet holder/pin should be resting on a small pillar yet, after a a couple trigger pulls it moves from place and now rests ontop of the pillar and creates some sort of resistance and causes the plastic to wear down. Any sort of suggestions?
Hello! That's unusual the pillar in the gb shell is usually on spec in a Cyma. Just to check... this is happening with the shell closed up properly?? The only thing off top of my head I can think of is to maybe add something to the back of the magnet holder or the top of the pillar to make the contact area larger to it cant lift onto the top of the pillar.. Oh wait the other thing you COULD try is shimming the trigger down in to the left of the gearbox (forcing down close to the pillar and keeping it down as there may be side to side movement in trigger which could be causing this. Hope one of those helps! Pheas
@@PheasAirsoft Hi Pheas, so I have closed it but I haven’t added any screws in yet, but it seems like the tension of the spring and trigger causes is to move up and ontop of the pillar rather than stay put. I’ll try it again with some screws to see if that creates enough pressure to keep it in place
Installed mine using this video but it fires 3rnd burst in semi then light flashes yellow/green
Hello! The yellow/green is a cycle detention failure. This could be down to the gear having too much grease on it, could be the MOSFET sat not quite in the right place or it could be grease on the sensor. I would check those.. probably do the grease between the teeth first, then the grease on the sensor, then the positioning. That should resolve it. Pheas
@PheasAirsoft will give that a shot. Ive wipe sensors free of any possible grease and the gears got minimal. Im wanting to say it could be may sector gear isnt shimmed properly or maybe PME.
Have cleaned sensors and teeth from heavy grease. Still having the same issue. Im stumped it willvfire 3 times rhen flash green/yellow then will allow me to pull trigger again after a short delay then it fires 3 times and then yello/green light. Ive checked everything in my knowledge but still stumped
@@SeanFirestone The only 2 things I can think of then are that the sensor is damaged OR more likely: the whole board is slightly out of position. I would losen the screw that retains it, move it up / towards the gear. Then screw it back down and try again. if that doesnt work then it could be the sensor is damaged. Pheas
@@PheasAirsoft ended up swapping gears out for shs 13:1 and had no issues
Who ever owns that gun must get soooo many ladies
I sure wonder who that lucky man is