+UEAKCrash is there really any good use for carve? i always hear people say 'its only used very rarely by expert mappers' but they never give any context on what use it actually has.
@@room___ There's only very rare instances where it's useful. The best example would be if you were making rounded corners. Like a street turning 90*. Other things that you think would make sense like hollow cylinders that act as sewer pipes you should not do, because carving does not align to the grid. and you're gonna need all points on that sewer pipe to be on the grid if you want to do anything complex with it. So, in conclusion, don't do anything complex with the carve tool at all. Anything complex should be done by hand with the vertex tool.
Carving is like using drugs, only when needed and in small amounts. Also make sure to properly quarantine the immediate area in case of unintended side effects
if you realy want to carve (wich is possible), you need to take the shaped block into a surface hold down mouse and then press ALT+F4. And there you have it, a perfectly shaped hole
Ahh...good ol' carve tool. I remember it. Used to be my best friend. Took it with me everywhere I go. Using it to carve circular holes in walls....ah... Good times...good times...
Hey thanks for the help in Hammer Crash! Weird ending tho, oh and that's a very specific date to post a vid. Oh and a lot of people keep saying this video was a good april fools joke, but i don't see it. Keep up the good work!
hi ueak, im creating a map for the mayann update, based on the medeival mode (without the melee restriction) how do i make that whenever both a and b are captured, the main door get lifted up
So I know april fools video and whatever but Satan gives the good advice? Like satan appears and then he's the voice of reason for the rest of the episode? okay
Use the clipping tool. Takes a few more steps but you have way more precise control and won't accidentally cause microbrushes or other issues down the road. Trust me, it's worth the couple extra clicks to not get into the habit of using carve.
tried making a map saw this video "woah, I can use this to make my map so much easier c: " deleted map started over "wait. what the fuck" never gonna map again true story
Carve seems like it'd be fine with just prisms and making doorways though. But, even me with my limited knowledge in mapping knows not to use spheres to carve. Just... Ew. All those lines.
Watching this is like witnessing a murder but being able to do nothing about it.
+Scarfulhu I am surprised you are here Scarfulhu... You are truly everywhere
+Scarfulhu heyyy
+Scarfulhu What??
omfg same. how does noone understand DONT CARVE???
@@damiens1998 why?
How hammer didn't crash during this video is beyond me
[Heavy breathing]
This is the most painful april fools's joke yet. It huuuuuuurts.
...that ring at the end was made with carve, wasn't it.
+Geo T totally
+UEAKCrash is there really any good use for carve? i always hear people say 'its only used very rarely by expert mappers' but they never give any context on what use it actually has.
+room it's April fools bruh
@@room___ There's only very rare instances where it's useful. The best example would be if you were making rounded corners. Like a street turning 90*. Other things that you think would make sense like hollow cylinders that act as sewer pipes you should not do, because carving does not align to the grid. and you're gonna need all points on that sewer pipe to be on the grid if you want to do anything complex with it.
So, in conclusion, don't do anything complex with the carve tool at all. Anything complex should be done by hand with the vertex tool.
@@room___ very carefully
Carving is like using drugs, only when needed and in small amounts. Also make sure to properly quarantine the immediate area in case of unintended side effects
if you realy want to carve (wich is possible), you need to take the shaped block into a surface hold down mouse and then press ALT+F4. And there you have it, a perfectly shaped hole
Damnit crash, stop summoning Lucifer while mapping!
+Walter22 never
Isn't that the secret to map making?
At least satan was polite and explained why carve sucks. Shame on your crash.
I hear that Satan is actually a pretty cool dude.
+Walter22 where do you think he siphons his energy from to make a map for 72 hours?
"I'm Satan, and I endorse this message."
Satan for President.
But he's already becoming president just look at Donald trump
I sat on this in "watch later" for too long, not realizing it was an April 1st upload. :'(
Glad there was still actual advice. Praise Satan.
Thank god we have satan, the voice of reason, to clear everything up.
+Soviet Toaster First I read your name, and then read "Thank god we have stalin" automatically.
Ahh...good ol' carve tool. I remember it. Used to be my best friend. Took it with me everywhere I go. Using it to carve circular holes in walls....ah...
Good times...good times...
*casually watches everything burn*
Another great tutorial! Carving is clearly the best tool.
Hey thanks for the help in Hammer Crash! Weird ending tho, oh and that's a very specific date to post a vid. Oh and a lot of people keep saying this video was a good april fools joke, but i don't see it. Keep up the good work!
me: sees title: hmmmmmmmmm.
me: sees computer background: wai it no tf2?
me: hears voice: somtin up
in all honesty thats funny and all but how do you create round geometry like a sphere or circle
start with a cube then carve it into a cylinder with a rotated cube
@@Cd5ssmffan nice
4 years late but the brush tool lets you select the shape of the brush.
took so long to realize this is april fools
no video has ever made me laugh this hard
I HAVE TEARS IN MY EYES
Why do you torment my soul, Crash?
Making a bridge and using an arch with 5 sides almost broke my map when I tried to carve it xD
me trying to comprehend half awake at 2 am
Viperi haha that would be like an acid trip
Damn, even Satan discourages using carve. I guess even the Lord himself cannot handle the horror that is this tool.
hi ueak, im creating a map for the mayann update, based on the medeival mode (without the melee restriction) how do i make that whenever both a and b are captured, the main door get lifted up
Mr. Chub Chub you are a terrible person. Look up a tutorial for fucks sake, don't immediately ask a popular youtuber to make your map for you.
Adog312 sick trolling dude
I felt this shit in my fucking brain watching this. I nearly had an aneurism...... My god that fucking spherrreee
OH GOD UOU FCKING SSCEWED IT
YES! Keep up the good work crash! I'm so hyped for more
That is, until the end
RIP Monstroso, pretty neat you got him to read the Satan lines in advance and prior to his death
Now I can effectively make a block of cheese and summon Satan at the same time.
Holy shit the 2d view after the sphere wall lmaooo
The moment I saw carve in the title I knew shit was about to go down
To carve you press: Ctrl+Shift+C
You are the best person ever
i used this to make a water sphere with nothing on the middle, i'm still waiting to compile it...
my eyes are bleeding from the wireframes
*watching video*
"Wow this would have been fucking useful to know when I was doing this exact kind of thing earlier!"
*reads comments*
"Oh. Fuck."
no stop it's already dead aaa
The entire time watching this video I was thinking "This is bad, this is bad, this is very very bad."
I barely survived this video
The amount of plit brushes is the reason why people despise this technique.
this made me fucking cry
Vvis commited suicide when he compiled
I actual prefer Carve over clipping tool. I watch the spawn rooms video and can't not get the clipping work for me.
So I know april fools video and whatever but Satan gives the good advice? Like satan appears and then he's the voice of reason for the rest of the episode? okay
Can someone help me plz? When I search for "trigger" in hammar to make a door that can open and close it just can't find it. Can someone help?
I always accidently Carve instead of Group, and then corrupt the map.
The poly count
it hurts
Help? I tried carving and hammer just transformed in UDK4? I don't even have UDK installed.
My vvis will never be the same
Great video! Let's make carve great again!
Thanks you Satin, very cool
poor you, it must taken you hours to carve it out using cut tool
funniest thing I've ever seen
If Satan says carve is shit... We should all use it! Woohoo! Thanks crash!
Instructions unclear I summon god instead of Satan
So how do you carve like what buttons do you press
Gonna use this in my next map :)
Thanks for the tip! :D
Tell me the terrain tutorial is a reference to that infamous video.
+TheYagich yep! This video is sort of my take on it.
+TheYagich what infamous video?
room How to make terrain in Hammer.
oh ok
I am using this tool to make windows right now lol lol lol!
its real, the buttons are: CTRL+Shift+C
STOP! The engine is too crust for this!!
Seems like using Booleans in 3ds max ( a modeling software): makes a big mess of your wire frame.
That tutorial just got real!
This induced my psychosis
What? 0:23 which one
I actually really like the carve feature names shit easier for me.
This hurts.
what do I have to press ??!?!?
Oh come on, everyone know that Satan lies, listen to Crash :^)
yeah but i need carve because of my horrible terrain work not letting me use the clipping tool
Don't make terrain with brushes, use displacements
UEAKCrash i was already using displacements but it’d be way easier to use carving instead of the snipping tool in my case
@@UEAKCrash haha yeah nevermind the clipping tool actually worked way better
then press SSSS
instructions not clear got stuck inside computer
-being stabbed multiple times
-but nothing happens
2:31
Why is everyone freaking out about this?
You never stated how to actually carve.
+Griffin Bowling as intended
So carving is bad, but is there any problem using the ''Make Hollow'' tool
+Paul ter Rele It's basically doing the same thing. Usually better to just have more control over it and do it manually.
+UEAKCrash what are the button combinations???
The 2D views hurt!!!
i wish hammer had a boolean tool like blender. oh well
THEN PRESS WHAT? WHY DID YOU CUT IT OUT OF THE VIDEO?
Because it's an April fool's day joke video and the whole point is that you should not use carve
@@UEAKCrash oh. i see. but then how do i make like a door hole? anyways i found the tool and its keybind.
Use the clipping tool. Takes a few more steps but you have way more precise control and won't accidentally cause microbrushes or other issues down the road. Trust me, it's worth the couple extra clicks to not get into the habit of using carve.
Har har, April Fools.
Seriously, DO NOT CARVE. EVER. IT WILL GO BADLY FOR YOU. YOU WATCH.
+Vel0city
Calm down Merasmus.
***** WELCOME. TO YOUR DOOM.
best line - i am Satan and i endorse this message
What do you press to carve? The video cuts out as you said what keys to press
+TechnoPlayz Maybe its for the best...
+TechnoPlayz
Save first, in case hammer crashes but:
Alt + F4
::Kappa::
+steeledminer616 what have you done. didn't you listen to satan!
joshenkstone
Plot Twist: I am Satan. *Glares menacingly*
Clipping vs Carving.
Rick and morty!!!
Guys I legit don’t see a joke I’m new to hammer
Litteraly cuts out the exact second he says what button to press
ikr
@@UEAKCrash hmmmmmmmmmm
Press.. what?
Was it the thing you needed to record when a thunderstorm started?
+The Pineapple hilariously, yes it was... Right when I got to the Satan lines.
+UEAKCrash Please tell me you have that footage or audio or something still saved
tried making a map
saw this video
"woah, I can use this to make my map so much easier c: "
deleted map
started over
"wait. what the fuck"
never gonna map again
true story
My eyes...
Carve seems like it'd be fine with just prisms and making doorways though. But, even me with my limited knowledge in mapping knows not to use spheres to carve. Just... Ew. All those lines.
WHAT DO I PRESS?
I wanna make things breakable for my TF2 map. because i don't know how.
func_breakable
why
So... Okay?
Pretty solid 5 me.
Joke_acquired.
nice April Fools joke video but maybe a tutorial on making forward spawns and how to utilize them? heck yeah 25 days till b-day
nooo
cmon crash lets upload a real tutorial
Thanks Mr Satan
Reported for promoting terrorism.
how to fucking kill hammer