OH32M02 build, the newest Orlandoo hunter release
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- So here it is…….. the Orlandoo Hunter OH32M02!!!!.
This is a first for me to build a Orlandoo and drive it before painting, but I was very eager to see how it drives. The build is pretty much the same as the M01 but a few extra steps. MMC is officially the first driving video on TH-cam 😊. I’d recommend upgrading the driveshafts and stronger servo. But other than that I’m very impressed with the continuing quality that you get from Orlandoo Hunter!. Massive thanks to drone junkie for the early hook up 🤟😎. These will be available to buy from him very soon. www.dronejunki...
Thanks for watching
Music:www.bensound.com
very very nice 😀 👍 👍 👍 😎
Had a look at them at the Funduro this weekend, and a good chat with the guys selling them, they are amazing for the size! I like these trucks more than the buggies but obvs they are not as capable as the buggies. Scale is great tho
Nice one, Mike! It's a cool looking truck (or lorry), I'll be looking forward to seeing your special MMC additions to it. I think the yellow/black theme will be great, also on this one.
I have completely given up building Orlandoos by now, but I do enjoy watching them being built on video, ha ha!
Cheers buddy 🤟😎. Glad you enjoy the videos 😉. Hopefully I’ll keep them coming for you😜
nice!!
Col Nathan Jessep was wrong... you CAN handle the 30 tooth 💪👍
Brother.. Which Controller and receiver are perfect for this?
To be fair, there’s enough room in the cab for any receiver. My go to was the flysky gt5 with 6 channels. But I’ve just got this amazing controller [£121.80]RadioMaster MT12 Surface Radio Controller 2.4GHz ELRS/4-in-1 Multi-protocol 16CH Open Source EDGETX System Transmitter With ER3C-I/R85C Receiver RC Parts from Toys Hobbies and Robot on banggood ban.ggood.vip/14GSu
could you share the link where to buy the appropriate battery for this? Thank you!
There’s loads of room inside the cab, so I’d say anything 2s and around 400mAh would work fine.
What RPM motor did you use? I didn't hear it in the video
I know, old video, but do you remember what rpm motor you used? trying to figure out what I should use in mine
I think I used a 150rpm. I’d recommend upgrading the driveshafts too. Good luck with your build buddy
Hello sir I just received this amazing truck I’m on the suspension assembly just wondering my u bolts came in 2 different sizes does it matter where I place them also do I need to bend the bar I have the x01 and didn’t bother bending it cause it’s not causing me any problems
Hmmm I’d say put the longer U bolts on the rear. I can’t remember if mine were different sizes but I’ll have a look. And with regards to the bar, I think it’s a yeah bend it. I don’t think it’ll fit if you don’t bend it. It’ll probably be to long otherwise. Good luck with the build buddy 😉
@@mikesmancave5505 I had to put the u bolts in the front and I will definitely bend the bar as I don’t want any problems thanks
Hello again is there anywhere to get new axles i have gotten some sand in my m02 axle front one and it grinds something fierce lol or should i take it apart and clean the sand out
Hey buddy, I’d try an clean them. I’ll look into upgrades, not 100% sure if the metal axles fit a mo2. I’ll look into it fella 😉. Chances are the bearings may be seized, either way good luck with the fix.
@@mikesmancave5505 ok thanks man i’ll clean it up first then i’ll do some upgrades to it
Hello, i have a defender, can I take all electronics parts to put in a OH32M02 kit ? (With same motor, receiver, d4L, ...) ?
Thanks
Yes you can. It uses the same electrics. Good luck with the build buddy. Also I’d suggest metal driveshafts. The plastic ones will break. And I did end up putting a bigger steering servo as the 2.2g Orlandoo one hasn’t quite got enough power for me lol.
Great video 😊
Did you wire the SMD's in parallel?
Thanks buddy 😉. Each led has been wired individually positive and negative. Loads of cables 🤯
lovely build video, but I don't think the finished product is worth it. Seriously good video though 👍🍺🇬🇧
1/32 scale. What a pain. 1/6 - 1/10 is way easier to build.