Pearl Reference ICON Rack Complete and Adjusted Setup….Finally!

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ธ.ค. 2024

ความคิดเห็น • 48

  • @hisnamewasrocco
    @hisnamewasrocco 11 หลายเดือนก่อน +1

    Gorgeous drum kit! I'm jealous!!

    • @PowerTom_kyle
      @PowerTom_kyle  11 หลายเดือนก่อน

      Thank you! It is so much fun to play…especially after a long day at work!

  • @jcdrums2798
    @jcdrums2798 11 หลายเดือนก่อน +3

    hello Kyle put a piece of rubber between the lug and the 15'' rack tom😉

  • @jaimemorales398
    @jaimemorales398 11 หลายเดือนก่อน +1

    POWAH! love it

  • @drsvc-drummer
    @drsvc-drummer 11 หลายเดือนก่อน +1

    I like my toms low also. I had a similar issue like that, so I ended up having to put a small piece of thick felt and / or foam to fix. Works well.

  • @beetlejews
    @beetlejews 11 หลายเดือนก่อน +2

    Nice set up bro!!!!!!

  • @isihernandez9752
    @isihernandez9752 11 หลายเดือนก่อน +3

    Dude, although Pearl makes great drums, I never dug their hardware so much, especially racks and those tom holders (pedals and hi hat stands are nice, though), but for what I can see you still have some margin there to raise a bit your toms. Maybe not the rack, but the holders. A bit to the limit, maybe, but still some room. As an alternative, I think you can adjust those tom suspension systems so the hole where the holder inserts gets lower on the tom, hence the tom would get in a higher position.
    (And yes, that tom will eventually break that bass drum lug if you keep it there).

    • @JCo1301
      @JCo1301 หลายเดือนก่อน

      That was my thought when looking at it too. There’s plenty of room left on the TH1030 tom arm itself, where you could just raise the tom arm up just enough to clear the bass drum lug. And then there’s plenty of other adjustments with the PCX-300 rack mount, the TH1030 gyro-lock tom arm, and the tom mount itself, to adjust & still easily get the angle you want for the tom, so it still evenly flows with the toms to the left and right of it. Hopefully he’s figured this out by now, but yeah, the solution is pretty simple to his problem, if I’m understanding him correctly.

  • @Swisstriplet
    @Swisstriplet 11 หลายเดือนก่อน +1

    Dream set

  • @ecovention
    @ecovention 9 หลายเดือนก่อน +1

    Put some industrial rubber under rack feet to raise it up.

  •  11 หลายเดือนก่อน +1

    She's gorgeous! 😍

    •  11 หลายเดือนก่อน

      Also, they sell patches of leather to prevent drums from scratching each other.

  • @johndhalgren9804
    @johndhalgren9804 11 หลายเดือนก่อน +1

    You can purchase a reciprocating blade to cut the hi-hat rod. They sell them at any hardware store.

    • @PowerTom_kyle
      @PowerTom_kyle  11 หลายเดือนก่อน

      Awesome. A file too to smooth it out.

  • @stevenwilson9865
    @stevenwilson9865 11 หลายเดือนก่อน +2

    Beautiful set! A hi-hat/bass drum clamp will get it closer to the snare and out of left field. A double bass must have accessory. Just a suggestion

    • @PowerTom_kyle
      @PowerTom_kyle  11 หลายเดือนก่อน

      I guess I’m terrified of mounting that off the bass drum hoop. Any horror stories?

    • @stevenwilson9865
      @stevenwilson9865 11 หลายเดือนก่อน

      @@PowerTom_kyle I haven't had, heard anyone having issues with this setup. I have #71 Ludwig Classic and use a clamp for decades...

    • @isihernandez9752
      @isihernandez9752 11 หลายเดือนก่อน

      ​@@PowerTom_kylethere're plenty of hoop protectors in the market. Some piece of rubber would do the trick as well.

  • @rippindrummer666
    @rippindrummer666 11 หลายเดือนก่อน +2

    I mean I guess the icon rack could go higher but also that’s the problem with power Tom sizes, they’re just harder to mount in general

    • @PowerTom_kyle
      @PowerTom_kyle  11 หลายเดือนก่อน

      That’s my point. Make a product that works for all the drum shells you produce.

  • @davidhoffmann345
    @davidhoffmann345 11 หลายเดือนก่อน +1

    Do you have any extra length on the Tom arm?
    BTW subbed when you got the kit and watched as people commented about the setup. I liked the way you didn’t bend and kept it as one! The icon rack is a great evolution, and still keeps the integrity of what it was meant for! Rock on Brother!!

  • @Oykkis
    @Oykkis 11 หลายเดือนก่อน +5

    You don't need higher rack.
    Just move your tom arm up in the clamp... 🤭

    • @batouttahell454
      @batouttahell454 11 หลายเดือนก่อน

      You need a Band and start playing and making MONEY my friend

  • @TomMSTie1138
    @TomMSTie1138 11 หลายเดือนก่อน

    Can you wedge a little bit of foam or a shim under the 15 Tom so it won't ruin the bass drum rod/lug?

  • @thomasjanssens2275
    @thomasjanssens2275 11 หลายเดือนก่อน

    You might want to look at getting a short hi-hat rod, so the rod does not interfere with your playing. Looks good to me.

    • @PowerTom_kyle
      @PowerTom_kyle  11 หลายเดือนก่อน

      I’m going to be sawing that down in the near future.

  • @mikew8622
    @mikew8622 11 หลายเดือนก่อน

    What a super kit! Only thing I don't like about the set up is how far away the hi hats are from the snare. We all have our preference

    • @PowerTom_kyle
      @PowerTom_kyle  11 หลายเดือนก่อน

      Now that you mention it, I didn’t put the HH back exactly where it belongs when I took this video, but it’s pretty close. I’m used having my foot on booth pedals, so it’s not too weird for me.

    • @mikew8622
      @mikew8622 11 หลายเดือนก่อน

      @ks7507 yes considering two bass drums.

  • @MrGuitarandvocals
    @MrGuitarandvocals 9 หลายเดือนก่อน

    Please don't take this the wrong way, but I would suggest moving the 13x15 to where the 14x16 tom is and put the 14x16 tom to the left of the hi hat on a tom holder. It would fix your lug rubbing issue. Obviously the other toms would have to be shifted over as well. I'm just confused as to why you would have a 14x16 tom and then a 16x16 floor tom right after it. It is literally the same drum. There is no tonal separation. Killer drums by the way. I love Pearl drums and power toms.

    • @PowerTom_kyle
      @PowerTom_kyle  9 หลายเดือนก่อน +1

      I’m not offended. At least you were respectful…so many jerks out there. I couldn’t disagree more, for two reasons. 1) My 16x14 mounted tom is 2” shallower than the 16x16 floor tom. And 2) the mounted tom is 6 plies 7.5 mm thick, the floor tom is 8 plies 10mm thick. There is a clear difference. 6”-16 mounted toms give complete tonal range.

    • @MrGuitarandvocals
      @MrGuitarandvocals 9 หลายเดือนก่อน

      @@PowerTom_kyle
      Are you sure about reason number 2? In an old 2014 Pearl catalog on their site, it states that toms/floors that are 14 inches in diameter and up, are 8 ply 10mm. Maybe the shell recipe has changed. As far as reason number 1, I don't see how a 2 inch difference in depth would make much of a tonal difference considering the shell thickness is the same. The resonance would be shorter and the note would be a little less deeper. The pitch would be almost identical. I don't hear a big difference. In all fairness, I'm not in your basement.

    • @PowerTom_kyle
      @PowerTom_kyle  9 หลายเดือนก่อน

      @@MrGuitarandvocals I think I know the specs of my kit. Check out the 2020/2021 catalog. And yes, for reasons stated, it makes all the difference.

    • @MrGuitarandvocals
      @MrGuitarandvocals 9 หลายเดือนก่อน

      @@PowerTom_kyle
      You're right. They did change the recipe. I didn't bother to look at the later catalogs because I didn't think the recipe would be different. I figured that's what the Reference Pures were for. My bad.

  • @tonypaella
    @tonypaella 11 หลายเดือนก่อน

    The thumbnail looks like a drum set for puppets

  • @ivanbajovic3476
    @ivanbajovic3476 11 หลายเดือนก่อน

    Change the mount to new Pearl GyroLock-L holder THL1030. You can lift up your 15" tom with it.

    • @PowerTom_kyle
      @PowerTom_kyle  11 หลายเดือนก่อน +1

      Great idea. Except for 2 problems. Pearl never showcased this new hardware with deep shelled heavy power toms. As a result I don’t know if the hardware can handle it. I just spent $1300.00 on a rack system. Definitely not spending another dime without this knowledge ahead of time.

    • @ivanbajovic3476
      @ivanbajovic3476 11 หลายเดือนก่อน

      @@PowerTom_kyle I guess they tested the product before releasing them. After all, it is Pearl, a serious company. They should not make big mistakes.

  • @vandavis000
    @vandavis000 11 หลายเดือนก่อน

  • @MichaelDionneDrummer
    @MichaelDionneDrummer 11 หลายเดือนก่อน

    I don't understand how you can hit the 8" tom without hitting the hi-hat rod or something 😅

    • @PowerTom_kyle
      @PowerTom_kyle  11 หลายเดือนก่อน

      The HH stand can get in the way. It’s just a matter of time before I get to it.

  • @yannyloyer7177
    @yannyloyer7177 11 หลายเดือนก่อน +1

    looks nice dude. you can always get longer Gibraltar tubes and change the uprights

  • @batouttahell454
    @batouttahell454 11 หลายเดือนก่อน +1

    Take hat stand to a Hardware store, they'll cut it

  • @morgunstyles7253
    @morgunstyles7253 6 หลายเดือนก่อน

    Don't cut your hihat rod. Just buy another. They're 10 dollars.

  • @williamboyle8918
    @williamboyle8918 11 หลายเดือนก่อน

    Mod the pipe easy

  • @benpowelldrummer
    @benpowelldrummer 11 หลายเดือนก่อน

    Just take the lug off the Kick Drum