Awesome job Vic! That was a hard one for sure! The pits were deep and in hard spots! Excellent job on putting her back in service!!!! Thanks for sharing...
I appreciate it Mr. Mark... I'm not sure the story of this Ratchet was a good'un until magdad found it..lol.. but I too like leaving some battle scars.. especially when this much sanding is involved..haha.. I appreciate your time! Thank ya!
😂 Mr. John for the life of me I couldn't figure out to get that out... so every move I made I was always checking to make sure that rascal didnt escape..😁 thank ya sir for your time!
It turned out great Vic ! Magdad and Chuck sure gave you a challenge. You took that challenge and ran with it doing as good as could be expected . It was darn pity and in bad areas. Thank You for sharing!
Vic i think that tool came out amazing for what you had to work with. Even Chuck couldn't have put enough Flitz on that one to take out that deep pitting ! Lol. That tool will be good for another 80 years my friend. 👍🔧🇺🇸
Wow ! You brought that Old ratchet back to life. It looks Fantastic Vic !!!! Great job. Love hearing those birds in the background ! Cool sticker board !
Vic you are a miracle worker the ratchet really looks good for what you had to work with. I like the scars and bumps it shows that you’re ratchet has lived a long and use full life and thanks to you it’s going be around a lot longer. Keep up the good work I always enjoy watching your videos.
I can’t believe how well it came out considering where you started with it ! Looks really great Vic well done. I don’t blame you for getting tired of sanding! 😂 well done my friend!
Those dings and scratches are called"Character". Kinda like those rust folks calling it patina. Lol You made a silk purse out of a sows ear! Great job!
How's she goin'? What a difference in that wrench from when you got it till when you finished the restoration. Looks some nice. Thanks for doing this Vic and take care!!!
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
Awesome job Vic! That was a hard one for sure! The pits were deep and in hard spots! Excellent job on putting her back in service!!!! Thanks for sharing...
Thank ya Mr. John! Always thankful for your comments and time! I appreciate it!
Hi Mr Vic, always a pleasure to be asked to stop by the shop, love your work, really enjoyed the bird sound's, take care my friend 👍👍👍🇺🇸🇬🇧
Hi Mr. Phil! Always look fwd to you swing by! Thank ya! I am glad you enjoyed the birds.... I cant get enough of them 😊😊
Mighty fine job Mr. Vic. Gonna start calling you Dr. Vic. You’ve got hands of a surgeon . Love the also.
Hi Mr Ronald!. 😊 I appreciate it! Thank ya sir!
Another great job 👏
I appreciate it Mr. Clifford!! Thank ya sir!
Wow! That is one HUGE comeback Vic for that Plumb rachet. I love that little red detail.❤❤❤
Hi Brother! It took a little bit to get this would in shape 😊👍 I appreciate ya! Thank ya sir!
Great job Vic. Mate that looks perfect to me. The pits left are what makes it perfect. They tell the story of the ratchet’s life. 👌
I appreciate it Mr. Mark... I'm not sure the story of this Ratchet was a good'un until magdad found it..lol.. but I too like leaving some battle scars.. especially when this much sanding is involved..haha.. I appreciate your time! Thank ya!
For it’s age and use, turned out great, nice work!
I appreciate it Mr. Larry! Thank ya sir!
Helluva improvement Vic. Can't get any better than you did.
Hi Mr. John! Thank ya sir! That means a lot to me that you say that!! Thank ya for your time!!
great job for what it was...back in service...
I appreciate it Uncle Black! Thank ya sir!!
What a lovely old ratchet 🛠👍😊
Thank ya sir!
Hi, Vic 🐾🌟 Thank you for this beautiful work, you made a great job as always 👑
Thank you sir! I appreciate it! Thank ya much for your time and nice comment!
Nice job!
Thank ya much!
Well done Vic! I like the red accents! 😃👍🏼
Thank mr David.. I appreciate it..wish I had my neon green.. 🤠👍
Love the hat also
Thank ya much!
So that little bird put you to the test!😁. Well it looks great! Thanks for the video.
I appreciate it Mr. Tony! Thanks for your time!
Great job! You shaved another one! That sticker bord is filling up! Have a great weekend! Thanks 🙂🙏
Thank ya Brother! I hope the same for you! I appreciate ya!
Awesome work, looks great
Thank ya Mr. Alfred! I appreciate ya my friend!
That's amazing. That thing was swiss cheese! Fantastic!
Thank ya Mr. Ben! I appreciate it! It was in ruff shape forsure! Thanks for watching!
Unbelievable! Great job Vic! When you popped the little springs out , I went oh shit!….glad you stayed away from the ball bearing! Fun video!
😂 Mr. John for the life of me I couldn't figure out to get that out... so every move I made I was always checking to make sure that rascal didnt escape..😁 thank ya sir for your time!
Clean up nicely and functional again. Always great to see the sticker wall progress 😉👍👩🔧
Thank ya much! I appreciate it!
I love watching the 3 of you. Chuck is great.
I sure appreciate ya! Thank ya! Chuck & Magdad are awesome I enjoy all his videos!! Thank ya much!!
It turned out great Vic ! Magdad and Chuck sure gave you a challenge. You took that challenge and ran with it doing as good as could be expected . It was darn pity and in bad areas. Thank You for sharing!
Thank ya much Mr. Jack! I sure appreciate your kind words and your time! Thank ya sir!
I can't believe how nice you got that to come out. Amazing job Vic 👍
Thank ya... it was really alot of fun! Thanks!
Great job cuz
Thank ya Rock!
It turned out great Vic! I'm glad you had fun with it! Chuck says hi!
Chucks my dude! I appreciate it Magdad! And thank ya again!!
Vic i think that tool came out amazing for what you had to work with. Even Chuck couldn't have put enough Flitz on that one to take out that deep pitting ! Lol. That tool will be good for another 80 years my friend. 👍🔧🇺🇸
😊😊😊😊 outstanding comment! But chucks pretty darn good! 👍 thank ya so much Mr. Roger! Much appreciated!!
Howdy Vic! That's good work! Thanks for the Flitz love!
I appreciate it! Thank ya for your time!
Great work! That ratchet came out very good. Its nice to look at. Thanks for that video.
Thank ya sir! I appreciate it and your time!
Wow ! You brought that Old ratchet back to life. It looks Fantastic Vic !!!! Great job. Love hearing those birds in the background ! Cool sticker board !
I appreciate it Mr. Kris! I love hearing the chirppin' and glad spring is here... thank ya for your time!!
It was never gonna come back to perfection, but I think you did all anyone could do with it and it looks nice and presentable! Well done!
Thank ya Mr. James! I appreciate it and your time watching!!
hey,mr.vic i think you did a dam good job
Thank ya much Mr. Timothy! I appreciate it and your time!
Vic you are a miracle worker the ratchet really looks good for what you had to work with. I like the scars and bumps it shows that you’re ratchet has lived a long and use full life and thanks to you it’s going be around a lot longer. Keep up the good work I always enjoy watching your videos.
Mr. Michael, brother thank you for the kind words! I sure appreciate it! And thank ya much for your time! I kind of like the little scars too.. 😊👍
I can’t believe how well it came out considering where you started with it ! Looks really great Vic well done. I don’t blame you for getting tired of sanding! 😂 well done my friend!
I appreciate it Mr. Ian! Thank ya much brother! And thanks for watching!
May not be perfect but still well worth saving. You did a great job Vic.
Thank ya Mr. Rick! I knew I couldnt get it perfect but had a good time really trying too..😳 Thank ya for your time! I appreciate it!
Outstanding! That turned out great.
Those indents in the flippers may be to keep the springs in place, not from wear.
Hi Mr. Jeff! I appreciate it! Hmmm..didnt think that way...I always think the worst..lol.. thanks for watching
Those dings and scratches are called"Character". Kinda like those rust folks calling it patina. Lol You made a silk purse out of a sows ear! Great job!
Thank ya Mr. Wade! I agree! Now.. She is smooth! I appreciate ya!
How's she goin'? What a difference in that wrench from when you got it till when you finished the restoration. Looks some nice. Thanks for doing this Vic and take care!!!
Hi Mr. Mike! Thank ya my friend! I appreciate your nice words and your time stopping in! Thank ya!
Dang, looks like you had to put some real elbow grease into that one. Came out really nice!!
Hi Mr. Bob! Too much..lol.. I got tired of sanding..lol.. I appreciate ya! Thank ya sir!
Nice dude! I like the lettering . And yeah I would have left the bearing too . I've them go flyin lol. Great stuff man!
Thank ya much! I appreciate it!