Just the series I've been waiting for! Lots of content on TH-cam covering this and that related to 12V's, but not an in depth start to finish rebuild. My request as you progress is: keep the information coming, try not to skip steps or gloss over explanations as so many do. I get it, you cant go over EVERY detail, but know that I for one really appreciate all the information I can get. I've got the garage, the tools and the ambition... your series will help boost my confidence and tackle my 97 12V that has so much blow-by I feel like I've got 2 exhaust pipes! lol. Subscribed.
Loving this series. I just removed my 12 valve from my 92 W250 and Its ready for the rebuild. I have the tools and the ambition, I just hope that I dont screw it up haha
Thanks for these videos bro. I'm in the process off rebuilding my 97 12v as well. Cam retainer bolts backed out and broke the cam gear and cam retainer. Think kdp had a part to play too because it ain't in its hole lol. Bent my push rods pretty sure that my valves are bent but haven't pulled them out the head. Keep the series going man they are greatly appreciated man
Tha ks for taking the time to make all the content you put out, its been great. I have a 12 valve thas going to have to come apart, probably next summer. But this will be a good guide. Thanks again.
Hey Rob Quick question regarding the parts washer, what would be the best way to clean the block, head, cam, etc in case you don’t have the big washer available? Thanks man once again for your time and for sharing your knowledge! Best on TH-cam, hands down!!!
Rob, appreciate the minty walkthroughs! With 3200 rpm spring on 60lb springs, are there any further precautions to take aside from better oil as you said? This is for a non i/c 90 5.9 w250. I’m doing a full rebuild with 155 bowls 150hp injectors, BW 362sxe, arp studs, and ve rebuild.
Great tutorial videos....How'd the turbo look?I'm just wondering if it had something to do with the damage. I am leaning more towards a fuel issue though.....I'm looking at the whole series now....thanks.
Where exactly are you in Canada ? I'm in BC and would love for you to take a look at my Fummins have a bit of a problem with power. I can't figure it out.
Can you tell me what the 2 bolt bracket in the timing cover below the water pump is for? Thanks for sharing these videos! Liked and subscribed! From Connecticut 👍
My 6th injector got stuck inside and when pulling only the top half came off. that being said the bottom is left to be stuck inside and will not come up would i have to tear it down the to head or is there a way of getting it out ? 93/5.9
Just the series I've been waiting for! Lots of content on TH-cam covering this and that related to 12V's, but not an in depth start to finish rebuild. My request as you progress is: keep the information coming, try not to skip steps or gloss over explanations as so many do. I get it, you cant go over EVERY detail, but know that I for one really appreciate all the information I can get. I've got the garage, the tools and the ambition... your series will help boost my confidence and tackle my 97 12V that has so much blow-by I feel like I've got 2 exhaust pipes! lol. Subscribed.
This is what I hoping for. Non is this is hard. Just need the info. Thanks for watching
Here from 5.9 page on Facebook. Nice work
Thanks
You have the most informative Cummins content I have ever seen on TH-cam. Thanks for posting this series
thanks, if you would mind please share let everyone know
Yes saw it on Facebook, glad you decided to do it!
Thanks for coming over. Ya hopefully it will help a bunch of guys
Thank you for doing this series!
no problem hoping it helps a bunch of guys out,
Loving this series. I just removed my 12 valve from my 92 W250 and Its ready for the rebuild. I have the tools and the ambition, I just hope that I dont screw it up haha
how did it go?
Rob, you have done this a time or two.. Great to see a man that knows what he is doing...
man subscribers are growing like wild fire lol i was one of your first keep up the awsome content
Working on it. I appreciate all of the subs. I want to channel to grow to help and let me give back
Yeah i started posting a few videos of my own to
Here from Facebook, subbed!!!!
Thanks
Time lapse music made me want to go to a disco, well done thank you.
thanks lol
Thanks for these videos bro. I'm in the process off rebuilding my 97 12v as well. Cam retainer bolts backed out and broke the cam gear and cam retainer. Think kdp had a part to play too because it ain't in its hole lol. Bent my push rods pretty sure that my valves are bent but haven't pulled them out the head. Keep the series going man they are greatly appreciated man
Ya sucks when that happens. Thanks for watching!
TAKE PICTURES AS YOU DO TEARDOWN! always helps! great videos
Yep that’s a great idea too
Tha ks for taking the time to make all the content you put out, its been great. I have a 12 valve thas going to have to come apart, probably next summer. But this will be a good guide. Thanks again.
Glad the video’s are helpful
Yes..thank you for taking time and making this videos for us!! I have a 97 reg cab 12 valve 4x4
I am glad people are watching. Sweet if you have IG tag me in a post
@@CUTTERUPROB I dont think I do..maybe my daughters have me signed up on Insta ...haha
Great info rob. Thanks for sharing your knowledge. It'll come in handy in the not to distant future.
🙏
Good job explaining things
Excellent explanation 👌 🎉
Hey Rob
Quick question regarding the parts washer, what would be the best way to clean the block, head, cam, etc in case you don’t have the big washer available?
Thanks man once again for your time and for sharing your knowledge! Best on TH-cam, hands down!!!
thanks for watching. power washer works. diesel and brush works. lot of different
great video we,put a 6.7 on a 06 runs bad at low idle do we need to swap inlectors that makes no sence to me. thanks for any advice
if your running the 06 injector it wold run bad , spray angle is wrong
Rob, appreciate the minty walkthroughs! With 3200 rpm spring on 60lb springs, are there any further precautions to take aside from better oil as you said? This is for a non i/c 90 5.9 w250. I’m doing a full rebuild with 155 bowls 150hp injectors, BW 362sxe, arp studs, and ve rebuild.
Oil temp is a big thing to watch.
Great tutorial videos....How'd the turbo look?I'm just wondering if it had something to do with the damage.
I am leaning more towards a fuel issue though.....I'm looking at the whole series now....thanks.
Turbo from that engine was right full on metal. That injector had a crack in the nozzle
This one doesn't have that large round cylinder on it for the coolent?
What we talking about here
Where exactly are you in Canada ? I'm in BC and would love for you to take a look at my Fummins have a bit of a problem with power. I can't figure it out.
Can you tell me what the 2 bolt bracket in the timing cover below the water pump is for?
Thanks for sharing these videos! Liked and subscribed! From Connecticut 👍
The two studs ? If so there for the crank sensor
Yup that’s the bracket on the studs...would a 95 12valve 5speed have that sensor? Thanks!
@@roofer4kidz913 no problem
What would be the best/easiest cummins swap for a gmc? I'd like a 6.7 but don't that will be a easy as a p pump 12v
At this point they’re all pretty easy. Just the commonrail will cost more as there is wiring and programming needed
@@CUTTERUPROB can it be ran on a p pump so I can run black diesel?
@@petervanguilder6276 yep sure can. But at that point way cheaper to run a 12v
@@CUTTERUPROB no benefits to having the 6.7 converted over?
@@petervanguilder6276 there is but the extra money unless you really want one doesn’t make sense
Hey Rob, what’s that engine stand your using?
The yellow one is just a 2000lbs one
My 6th injector got stuck inside and when pulling only the top half came off. that being said the bottom is left to be stuck inside and will not come up would i have to tear it down the to head or is there a way of getting it out ? 93/5.9
Pretty hard to get them out when they do that. Likely will have to pull the head off
Thanks for sharing, great info
Thanks for watching!
So what's your preference a 12valve or a 24valve Cummins
Depends on what your doing
How much would you charge to rebuild one that threw a bearing?
Hard to tell you with out having it apart for a inspection
Sir how to check blowby?
I will have to do a video
How many miles was on her?
500k
I have 5.9 24 v if u want to rebuild it has 240, 000 miles need rebuild. I want to go full tilt twin turbo
Nice
Thanks for watching
Thanks! Starting my first rebuild. Shoot me your address and I’ll send you a case of PB Blaster lol
Would rather listen to you working with some commentary then that horrible sound you call music
working on doing some better for the time lapse parts. my editing software is limited.
I just put up part 2 with commentary let me know what you think