How to customize a crosman 1322
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2025
- READ BELOW FOR PARTS ETC
How to customize your Crosman 1322/1377
We are customizing a stock Crosman 1322 or 1377 with the following parts
In this video I will show you how I customize a Crosman 1322 or 1377 pellet gun the parts are the same for both models , watch to find out first, see more details below !
Wood custom grips and for-end which will be stain afterwards with chestnut stain an then poly coated
A Buck rail moderator an adapter with easy pin will be added
An adjustable sear spring trigger.
All parts can be found below here
These links are provided for your convenience , in no way I take responsibility for your shopping with these sellers or guarantee product availability .
Crosman pellet gun 1322 .22cal
www.amazon.com...
www.pyramydair...
Or
Crosman pellet gun 1377 .177 cal
www.amazon.com...
www.pyramydair...
Buckrail
buck-rail.com/...
ADJUSTABLE TRIGGER SEAR SPRING for Crosman 2240 2250 1377 1322 etc
www.ebay.com/i...
READY TO FINISH COMFY WALNUT WOOD PUMP FORE ARM for Crosman 1322 1377 2289 etc.
www.ebay.com/i...
NEW! BRASS SCREWS ON STAINLESS STEEL ROLL PIN REPLACEMENT for Crosman 1322 etc.
www.ebay.com/i...
Minwax chestnut
www.amazon.com...
Minwax Poly Gloss coat
www.amazon.com...
Please give the thumbs up and subscribe and see my cooking channel as well , much appreciated .
Get on amazon 1322 or 1377
www.amazon.com/Crosman-American-P1322-Multi-Pump-Pneumatic/dp/B00TEACIIO/ref=sr_1_1_sspa?crid=3CJWKS4V3Y7KF&keywords=crosman%2B1322&qid=1650365344&sprefix=crosman%2B1322%2Caps%2C109&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExQ01QVjNMQk5SOERIJmVuY3J5cHRlZElkPUEwNDk5MDU4MUVPVDUwWlFNUTQyVyZlbmNyeXB0ZWRBZElkPUEwNDI1MzI0SlRSSVVaRFo1VzlSJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1&psc=1
Have you noticed that the grips start to wooble/loosen after making 50-100 shots with pumping each time and you need to tighten the grip screws again?
No I I don’t
Please consider hitting the thank you Heart ❤🩹 for a small donation , everything made goes right back into. the Channel for you 🥰
The band adaptor was a pretty tight fit, but I didn't drill mine...just pressed it on
I didn’t want to crack mine . I suppose I could of put silicone oil and pressed it on .
@@PeterAgostiniJdcap26 That's actually what I did...a couple drops of treadmill lube (silicone)...I use it for my Gamo Swarm Maxxim
See the conclusion of this model all completed in next video “ how to stain wood grips on 1322“
Go by these tips below
Tip1 )The Buck rail adapter has to be drilled out to fit barrel ,measure it ,first I believe it 1/2 in us jig and drill press.
.
Tip 2) Ream out the 1/8th tube body to put pump pin in. keep the tube body and pump arm aligned when doing so , it may need very little cleaning up. Then tap pin gently in when you put the buck rail adapter on. DO NOT HAMMER ON TABLE OR HARD SURFACE OR YOU WILL BREAK THE ADPTER!!
Tip 3) The grips need the right length screws you could use the ones from the plastic for end but you may need to cut one to length with with Dremel disc cutter .
Top4) Take your time putting on the for end wood stock use 1/16 Allen wrench , if you can get one on the other should align , no promises but made very well to spec.
👆🏻 tap on the title above for more information on parts
Check this target system out
bushesland.com/product/remotely-resettable-target-system-copy/
Can be seen on air gun detectives !
wow whatsup with the breathing, are you ok man?
I needed my medicine.
Thanks for asking .
@@PeterAgostiniJdcap26 im sorry to hear that mate, lovely video by the way. Im starting on the little brother 1377 next week.
Please consider hitting the thank you Heart ❤🩹 for a small donation , everything made goes right back into. the Channel for you 🥰