I was printing on the L1800. My 300gsm paper stuck in the middle and both the lights were blinking. I could take out the paper to i force removed it. Now when i print, all the print is fine except when it reaches the end of the paper where it happens again. Basically the print head hits the end of the paper at the end. what could be the issue?
I think your ink pad counter is full, to chk that u need to download L1800 maintenance software program and chk the ink pad counter in it and if it shows full or reading is more than what it should be then you need to reset it through the software. once reset is done as per instruction prompts in the software, your printer should work fine.
hello sir, my issue is that printer all 3 lights are blinking at same time as i power on in my epson l1800, and head carriage is also not moving, can you plz advise what cause this issue. i will be very grateful to you.
Hello, pls watch all my videos, i think i have addressed that issue in one of the video, if you still d'nt understand pls comment, will try to help if I can.
My issue is when i power on , the head shows some movement but does not goes to left side and come back and ink and paper light start blink together at same time. Plz sir advice
masalah lampu berkedip disebabkan oleh dua alasan 1) setiap halangan dalam poros penggerak print head 2) sirkuit pendek kepala cetak kedua alasan di atas pada akhirnya dapat menyebabkan lampu ini menyala
Thanks, man. You helped me a lot here. I've been having this problem like forever now. Finally, I can print again.
Thanks! I was printing from roll and needed to clean head. I cutted the roll roughly and small torn piece got stucked in carriage. I resolved mine!
Hey thanks. Very helpful video. Sorted. I found small small bits of paper in it.
Glad it helped
what about the white ligt it keeps flasing, do you know which strip is the one that contros the white ink ?
I was printing on the L1800. My 300gsm paper stuck in the middle and both the lights were blinking. I could take out the paper to i force removed it. Now when i print, all the print is fine except when it reaches the end of the paper where it happens again. Basically the print head hits the end of the paper at the end. what could be the issue?
I got a code that says fatal error after cleaning print head? Are you familiar with printer codes?
well explain sir..keep it up
Thanks and welcome
When I on my printer (L1800) My head is not stopping its running till end and one noise comes and then 2 stable orange light come. Can you help
I think your ink pad counter is full, to chk that u need to download L1800 maintenance software program and chk the ink pad counter in it and if it shows full or reading is more than what it should be then you need to reset it through the software. once reset is done as per instruction prompts in the software, your printer should work fine.
My issue is when i power on printer the head not move and lights starts blinking
Same problem sir did you solve the problem to your printer?
Yes, I became busy and couldn't make the video and post it.
hello sir, my issue is that printer all 3 lights are blinking at same time as i power on in my epson l1800, and head carriage is also not moving, can you plz advise what cause this issue. i will be very grateful to you.
Hello, pls watch all my videos, i think i have addressed that issue in one of the video, if you still d'nt understand pls comment, will try to help if I can.
My issue is when i power on , the head shows some movement but does not goes to left side and come back and ink and paper light start blink together at same time. Plz sir advice
lu ngomong apa sihh
masalah lampu berkedip disebabkan oleh dua alasan
1) setiap halangan dalam poros penggerak print head
2) sirkuit pendek kepala cetak
kedua alasan di atas pada akhirnya dapat menyebabkan lampu ini menyala