I just finished printing this off and I love it, but the tolerance where the two pieces slide together is a little tight. I printed using pla at 210c with tree supports and a layer hight of .2mm. After sanding, it slid on a bit easier, but still got stuck. The second print I used the same settings, but I increased the gap for the v-groove by 0.1mm, and after sanding it slid on smoothly with no slack. I used the Kobra 3 to make this print.
My Kobra 3 arrived today, my first FDM printer, I had no idea that it "slung its poop" till I walked in after running a test print with multiple colours and finding them all over my floor. This will be a great addition, thank you.
Just a big Thank You! I just completed the printing and installation of your poop catcher design. It fits and functions perfectly! Excellent👏 Thank you so much for sharing!
This is perfect. I'm still waiting for my Kobra 3 to ship, but i've been printing a few things in preparation for it to arrive so i can have it all set up as soon as it gets here, this was one thing i knew i wanted for mine but hadn't seen it anywhere else yet.
I'm gonna use this, but modify the catch basket to just be a chute. I have a trash can dedicated to just filament scrap right next to the table with my printer, so it can safely home and will just be leaned off the edge. It'll be like a garbage chute on a construction site headed into a dumpster! Thanks for your work designing the mount!
Thanks for this creative and cool download I just downloaded it and I’ll probably add it to my printer after I print all the stuff I need in a few days
Just got the Kobra 3/ACE Pro combo; You saved my life! I didn't know it spit filament like this, and it flew onto my Creality active dryer! Thankfully it didn't burn anything haha! Thank you!
@AnthonyScott_Little_Black_Duck Yeah, that's why I always say in my review videos that 3d printer company should include a roll or 0.5kg of filament for each 3d printer they sell, so we can use it when getting the machine.
Thank you for making this video I am. going to be receiving my anycubic Kobra 3 in the mail anytime soon and I'm glad that somebody made a poop catcher. Thank. Thank you for your time making this.
Like your vids S3DP, I printed the poop catcher and fitted it. I might suggest that the wall the poop shoots to be a little bigger? it wasn’t quite tall or wide enough and it gathered the poop in a stuck pile then it just spread over the floor. Otherwise it is a great addition. Thank you
This is awesome thank you! Im going to modify mine a bit to be able to add my camera to your bracket too since I want it facing away from the rest of my workspace.
Thanks, yes the STL file is in Makeronline. I also just added the print profile for the bin. Here: www.makeronline.com/en/model/Anycubic%20Kobra%203%20Filament%20Poop%20Catcher%20Bin/15281.html
Just got my kobra 3 combo tuesday and got the flexi shark test print started and laughed when I saw the flying poops. Definitely gonna print your mod to catch the poop soon. 😂
Why does my poop slinger shoot the wrong way? The spring starts on the closed position, and then it fires it across the entire build plate. But this chute catcher is if it's firing the other way. What gives?
I have the same problem, and i figured out it is the problem of the failure in triggering the magnet when the printer head approach. I then add a spacer in between the magnet at the side so to shorten the gap between the magnets, and it workers😊
Hey, how long did it take you to print each piece on the kobra 3? im using the configuration from anycubic to kobra 3 in orcaslicer but i feel that is a bit slow
It took about 1 hour to print the Kobra 3 attachment, but with colored logo, it took about 3 hours. For the large bin, about 4 hours. I use Anycubic Slicer. It has silimar time, maybe about 10 minutes difference, it also depend on the settings.
hI THERE do you know anything about the Kobra 2 Max. My extruder is pressing into the bed plate. How would I fix this. I am baffled by this problem. thank you. Kal
@@Scratch3DPrinting your poop bin is really solid before I found yours I used another that almost broke my printer head it snapped the front cover off and got caught on the poop shooter and almost broke that off too.
If I get what you're saying, is to cut a hole in the 3d printed box and put a box under the 3d printed box right? It would be difficult to get the perfect sizes box so that the attach 3d printed box does not smash into the box under it.
Hey there this is a super solution. I would pay for this. I have the Kobra3 in a FNATGR Box, so so the big basklet is to big the small to small.... Could you do one one 2cm bigger in width and length as the smal one? And realy take some money for this it is worth it. Best Markus
Thanks, I would like to keep it free so that everyone can download and print it whenever they wanted. If you want to support me then joining my Pateron or buying my merch would greatly be appreciated.
Download Anycubic Kobra 3 Filament Poop Catcher: www.makeronline.com/en/model/anycubic-kobra-3-filament-poop-catcher-bin/15281.html
Support the channel: Tee-Spring: my-store-fa69d5.creator-spring.com/
I just finished printing this off and I love it, but the tolerance where the two pieces slide together is a little tight. I printed using pla at 210c with tree supports and a layer hight of .2mm. After sanding, it slid on a bit easier, but still got stuck. The second print I used the same settings, but I increased the gap for the v-groove by 0.1mm, and after sanding it slid on smoothly with no slack. I used the Kobra 3 to make this print.
@@casonp.7922 That's nice. For mine it fitted perfectly. Every 3d printer is a bit different.
My Kobra 3 arrived today, my first FDM printer, I had no idea that it "slung its poop" till I walked in after running a test print with multiple colours and finding them all over my floor. This will be a great addition, thank you.
Haha, yeah, i was surprised too when I saw it sling poop all over my room. This will be a great addition to the kobra. I 3hope you enjoyed it.
Just a big Thank You! I just completed the printing and installation of your poop catcher design. It fits and functions perfectly! Excellent👏 Thank you so much for sharing!
You're welcome, glad you liked it.
This is perfect. I'm still waiting for my Kobra 3 to ship, but i've been printing a few things in preparation for it to arrive so i can have it all set up as soon as it gets here, this was one thing i knew i wanted for mine but hadn't seen it anywhere else yet.
Yeah, this machine needs something like this so that filaments is not all over the place.
I'm gonna use this, but modify the catch basket to just be a chute. I have a trash can dedicated to just filament scrap right next to the table with my printer, so it can safely home and will just be leaned off the edge. It'll be like a garbage chute on a construction site headed into a dumpster!
Thanks for your work designing the mount!
You're welcome. Glad you liked the design. Yes, modify it to how ever your situation is.
Thanks for this creative and cool download I just downloaded it and I’ll probably add it to my printer after I print all the stuff I need in a few days
No problem, it's a need for the Kobra 3 with all the poop getting sling everywhere.
Just got the Kobra 3/ACE Pro combo; You saved my life! I didn't know it spit filament like this, and it flew onto my Creality active dryer! Thankfully it didn't burn anything haha! Thank you!
Lol, yeah it SLING the filament into a different universe. I'm glad this model helped you.
This is amazing and very well designed great job my bro. 😊👍🏻👍🏻
Thank you so much 😀
Amazing! Thanks for making this. I've been looking for a poop catcher, and your creation is perfect. 👌🏼
Thanks glad you liked it
“If you have a Kobra 3 you would definitely know that” 😂😂😂😂 I can verify that because I know I have one cause I just bought one so that’s true.
😂😂😂😂
Just got one of those Cobra 3 printers and this will be very handy. Thanks!
I hope you enjoyed it.
@@Scratch3DPrinting I'd forgotten to get filament when I ordered the printer so I am waiting for that to arrive.
@AnthonyScott_Little_Black_Duck Yeah, that's why I always say in my review videos that 3d printer company should include a roll or 0.5kg of filament for each 3d printer they sell, so we can use it when getting the machine.
@@Scratch3DPrinting agreed. Btw have printed your gadget successfully.
Thank you for making this video I am. going to be receiving my anycubic Kobra 3 in the mail anytime soon and I'm glad that somebody made a poop catcher. Thank. Thank you for your time making this.
Congrats on getting a Kobra 3. Your welcome I also love the design.
Thanks for this! Will get this printed right after benchy! You Rock!
Haha, becnchy is always first. Thanks.
Like your vids S3DP, I printed the poop catcher and fitted it. I might suggest that the wall the poop shoots to be a little bigger? it wasn’t quite tall or wide enough and it gathered the poop in a stuck pile then it just spread over the floor. Otherwise it is a great addition. Thank you
Thank you. Glad it liked it. Yeah it keeps sticking on the wall because the sling filament is still melted. I'll try to make a better bin.
This is awesome thank you! Im going to modify mine a bit to be able to add my camera to your bracket too since I want it facing away from the rest of my workspace.
Thanks, yes go ahead and modify if to make it even better, I want to see what else could be done to it. Let me know how it turn out.
Did you ever do this? I would love to see how it turned out, and possibly use it.
Nice video and a awesome job on the design! Would you happen to have a file to print the basket.
Thanks, yes the STL file is in Makeronline. I also just added the print profile for the bin. Here: www.makeronline.com/en/model/Anycubic%20Kobra%203%20Filament%20Poop%20Catcher%20Bin/15281.html
Just got my kobra 3 combo tuesday and got the flexi shark test print started and laughed when I saw the flying poops. Definitely gonna print your mod to catch the poop soon. 😂
haha, me too. When I saw it sling the first time I did laughed and scratch my head.😂
@@Scratch3DPrinting got it printed and attached yesterday. 😁
Look forward to trying this mod. Thanks my dude
Thanks. Hope you enjoy it! Oh by the way, I made a bigger bin for it.
Why does my poop slinger shoot the wrong way? The spring starts on the closed position, and then it fires it across the entire build plate. But this chute catcher is if it's firing the other way. What gives?
I'm not sure why your slinger is shooting the wrong way..?
I have the same problem, and i figured out it is the problem of the failure in triggering the magnet when the printer head approach. I then add a spacer in between the magnet at the side so to shorten the gap between the magnets, and it workers😊
Thank you so much, this thing works and fits great.
Glad to hear it works for you!
Thank you for making this!!! Poop shooter driving me nuts.
Thanks, glad liked it
love the new poop catcher thanks to the files. any chance you can tell me or share with me where you got the I SLING POOP sign. Thanks again
Thanks, that sign I made it myself. I'll put it on makeronline if you are interested.
Awesome catcher design. I was curious if the catcher was little bigger would it affect the printer any?
No, it would not. Just don't make it any longer towards the bottom and towards the print head. (If that makes sense)
Great model! Thanks for sharing.
Thank you!
This model is great but I don't have anycubic kobra 3 3d printer is kind expensive is about a k1 3d printer.😅
Thanks, yeah the Kobra 3 is a bit on the higher end, but it is a good 3d printer.
GREAT JOB ! THANK YOU !
My pleasure!
Tried to print the "basket" . Keeps giving me an error message "The X - axis file exceeds the Device move out of range. Helo please?
Have you solved the problem? I have an other similar. Not open
Hey, how long did it take you to print each piece on the kobra 3?
im using the configuration from anycubic to kobra 3 in orcaslicer but i feel that is a bit slow
It took about 1 hour to print the Kobra 3 attachment, but with colored logo, it took about 3 hours. For the large bin, about 4 hours. I use Anycubic Slicer. It has silimar time, maybe about 10 minutes difference, it also depend on the settings.
hI THERE do you know anything about the Kobra 2 Max. My extruder is pressing into the bed plate. How would I fix this. I am baffled by this problem. thank you.
Kal
Sorry I don't have the Kobra 2 Max. It could be that the sensor for touching the bed is not working properly.
I cant see the basket model, I can print only one part. Where can i get the basket model?
There should be a tab called "Raw Model Files (5)" it contains all the files, included the basket files.
I am looking for a camera holder for the Kobra 3 do you know or have one looking for stl for it. thanks.
I currently don't have the camera, but will soon and when I do I'll make another video and have the stl files in it.
I watched 2 seconds and I went and printed it! thanks! lol
Lol, yeah this is a must for the Kobra 3. Hope you enjoy it.
Nice. Is there a file for the basket to download?
Everything is in Makeronline: www.makeronline.com/en/model/anycubic-kobra-3-filament-poop-catcher-bin/15281.html
How did you learn how to design things so good. And how to use fusion360 did you go to school for this or self taught?
Thanks. This is all self-taught, trial and error. Learning the basics from watching TH-cam videos and the rest is just doing it fusion360
@@Scratch3DPrinting your poop bin is really solid before I found yours I used another that almost broke my printer head it snapped the front cover off and got caught on the poop shooter and almost broke that off too.
@@BnR_Tech Thanks, glad it's working well for you.
Is there any way to reduce the amount of poop produced when changing colors?
I think there is a way, if we can get access to the g-code then it's possible to change the amount of filaments poops.
Коробка очень классная Большое спасибо за модель и Ваши идеи. А не могли бы Вы сделать модель!саморегулирующийся ножки для принтера кобра 2 про
Спасибо. Я использую Google Translate. У меня нет Kobra 2 Pro, поэтому я не знаю его размеров.
I loved, I will make me a small space of time in order to create a remix with a small backetball basket, I will share the results.
Glad you liked it. Thanks.
nice but maybe make the bin a bit deeper??
There's only about 5-10mm clearance from the bin hitting the table. I can make it taller but not much lower.
Thank you so much for sharing!
You are so welcome!
Hello anycubic give me an error when I try print the básquet. The firts attachment its perfect
Hi, are you using the .m3f file when download? If that's giving you problem then try using the STL file.
Thank you soo much. I have it 😊
put a large hole in bottom back of basket and put a box under it, they will push out into box
If I get what you're saying, is to cut a hole in the 3d printed box and put a box under the 3d printed box right?
It would be difficult to get the perfect sizes box so that the attach 3d printed box does not smash into the box under it.
I'm not able to find the basket to download. Has it been removed???
No, the basket is in the second tab called "Raw Model Files (5)" next to the "Print Profile Files (2)". Let me know if you still cannot find it.
@@Scratch3DPrinting thank you. I have it now.
Quite simply …brilliant. no longer is my dog sat waiting for his new game. Would happily paid for this solution….well don🎉e
Thanks.
Hey there this is a super solution. I would pay for this. I have the Kobra3 in a FNATGR Box, so so the big basklet is to big the small to small.... Could you do one one 2cm bigger in width and length as the smal one? And realy take some money for this it is worth it.
Best Markus
Thanks, I would like to keep it free so that everyone can download and print it whenever they wanted. If you want to support me then joining my Pateron or buying my merch would greatly be appreciated.
Works like a charm!
Thanks, glad you like it.
Discord link broken?
haaa.. thought it will never expire. Well here's the new one: discord.gg/QkbCy73ZjE
Let me know if it works.
My handly brokes off as soon as I klicked it in :(. Printed with PETG.
Maybe try it with PLA+. You can also locked it in from an angle with out pushing it locked.
thank you a lot bro !
You're welcome!
👏👏👏
😊