Also you should heat up the back and front of the phone again after assembly and push slightly around the phone. Just to soften the adhesive again to make sure every place is glued correctly.
is it ok if you remove the battery first before connecting some flex connectors? because it is dangerous if the power is present on the board even it is turn off. it can cause shorts if you attach some connections.
Thanks for the video! Why does the original screen that you take out on your other video have a black insulation on the back of it, but the replacement screen does not? It means the metal back of the replacement screen touches the metal shield in between the screen and the motherboard. I tried three different replacement screens from different sellers in the same phone, all without insulating backing, and on two of them the digitiser randomly stops working or registers an input when there is none, then randomly works again for a little while. The third screen I tried had a broken LCD (lines across it), but the digitser worked perfectly all the time, so I don't think it is a problem with the phone. I'm curious why none of the replacement screens you can buy have the black insulating backing on them?
I have bought new LCD displej assembly with front frame sticked together already. Do i need to separate LCD and frame in order to make the assembly again?
Hi Wit, my phone dropped into saltwater, and i have to clean some parts of the Motherboard and Battery. Do you have a tip how to clean the Phone- Parts? I dont want to destroy them. Thx
There's a sticker on the back frame with little connectors that allow the loudspeaker to work. The new frame I bought hasn't got it. Do you know where I can get it from?
Yes. I did this a few minutes ago. You cant access the button flex without removing the lcd and motherboard. Be carefull not to break the lcd and good luck!
Xperia Z1 Compact comes with middle frame- www.witrigs.com/oem-middle-frame-for-sony-xperia-z1-compact-black and back frame -www.witrigs.com/oem-back-frame-for-sony-xperia-z1-compact-white. What do you mean the front frame?
Wit Rigs i mean the frame around the screen, www.ebay.de/itm/original-Sony-D5503-Xperia-Z1-Compact-Frontrahmen-Frontcover-Gehause-schwarz-neu-/400866314974?pt=DE_Handy_PDA_Oberschalen_Designfolien&hash=item5d557e8ade
sdagare Oh. Yes! The front frame can be replace only. But the adhesive is strong. It is not an easy task to replace the front frame without scratching the middle frame. DIY repair is risky.
Wit Rigs Alright. Thank you so much for the reply and for the Amazing Videos. You are Awesome :) btw can u tell me the name of the music from the z1 compact teardown video? thanks
+Ples Andrei-Valentin Hi! Did you have to take the screen off? I have to replace the motherboard but i dont want to take the screen off and i wonder if this is possible..
Get Original Replacement Parts For Sony Xperia XZ1 Compact : witrigs.com/d7vzl
Also you should heat up the back and front of the phone again after assembly and push slightly around the phone. Just to soften the adhesive again to make sure every place is glued correctly.
is it ok if you remove the battery first before connecting some flex connectors? because it is dangerous if the power is present on the board even it is turn off. it can cause shorts if you attach some connections.
Thanks for the video! Why does the original screen that you take out on your other video have a black insulation on the back of it, but the replacement screen does not?
It means the metal back of the replacement screen touches the metal shield in between the screen and the motherboard. I tried three different replacement screens from different sellers in the same phone, all without insulating backing, and on two of them the digitiser randomly stops working or registers an input when there is none, then randomly works again for a little while. The third screen I tried had a broken LCD (lines across it), but the digitser worked perfectly all the time, so I don't think it is a problem with the phone. I'm curious why none of the replacement screens you can buy have the black insulating backing on them?
If I just replace the LCD and if I put the sticker it could still being waterproof? Do you send to Colombia? And how much it costs?
I have bought new LCD displej assembly with front frame sticked together already. Do i need to separate LCD and frame in order to make the assembly again?
where is this cellphone signal antenna located?
Hi Wit, my phone dropped into saltwater, and i have to clean some parts of the Motherboard and Battery. Do you have a tip how to clean the Phone- Parts? I dont want to destroy them. Thx
There's a sticker on the back frame with little connectors that allow the loudspeaker to work. The new frame I bought hasn't got it. Do you know where I can get it from?
can it be that ones you open your z1c is it still waterproof
joel baruela It is hard to keep waterproof after full disassembly.
where is the gps modul and gps antenna located?
Hi, do you know how to repair/replace my power button if not working in Z1 compact?
where i can get original adhesive for my z1 compact?sorry for bad english..
Where i can get adhesive frame??
can u send this replacement parts to egypt
if i want to replace the power button do i have to remove the LCD and motherboard first? thanks~
Yes. I did this a few minutes ago. You cant access the button flex without removing the lcd and motherboard. Be carefull not to break the lcd and good luck!
is it possible to change the front frame?
Xperia Z1 Compact comes with middle frame- www.witrigs.com/oem-middle-frame-for-sony-xperia-z1-compact-black
and back frame -www.witrigs.com/oem-back-frame-for-sony-xperia-z1-compact-white. What do you mean the front frame?
Wit Rigs i mean the frame around the screen, www.ebay.de/itm/original-Sony-D5503-Xperia-Z1-Compact-Frontrahmen-Frontcover-Gehause-schwarz-neu-/400866314974?pt=DE_Handy_PDA_Oberschalen_Designfolien&hash=item5d557e8ade
Wit Rigs
i want to fix an optical damage on the front
sdagare Oh. Yes! The front frame can be replace only. But the adhesive is strong. It is not an easy task to replace the front frame without scratching the middle frame. DIY repair is risky.
Wit Rigs
Alright. Thank you so much for the reply and for the Amazing Videos. You are Awesome :) btw can u tell me the name of the music from the z1 compact teardown video? thanks
Can't you connect the power button, shutter and headphone jack to the motherboard without taking the screen off? I can't find adhesive that's cheap...
+Ples Andrei-Valentin Hi! Did you have to take the screen off? I have to replace the motherboard but i dont want to take the screen off and i wonder if this is possible..
how to transfer the old NFC antenna on a new battery?
Is it possible to replace the whole housing of my Z1 Compact without damaging the LCD?
Plz watch the vedio of z1 compact disassembly to get some tips Sony Xperia Z1 Compact Teardown
No, not without extremely great difficulty. If you don't have access to a heat gun, I would say don't try it.
Do i need to heat the adhesive before install it
الله يعطيك الف عافيه
my z1 compact's lcd has been repaired and replced will it be water proof again?
joel baruela With original screen, original adhesive sticker and professional skill, it can keep waterproof.
Do you sell battery for z1 compact?
Yes, here it is. The original battery for z1 compact www.witrigs.com/oem-battery-for-sony-xperia-z1-compact
What is the brown square on the battery?
+AnkaaPtk It is NFC sticker.
How do I change the microphone?
+Luis Salgado The microphone is on the motherboard and it is hard to change only the mic.
Finally I can switch my vibrator to new.
i dont see install power button. Sorry for bad english
+Eren Akyol sorry, should have mentioned the power button was on the middle frame and not disassembled before.
where is memory?
Nice music hahahha
Hello, how can i change the microphone ?