For anyone about to do this job you DO NOT need to remove the lower control arm as shown in this video , just let the assembly hang after you take the two lower strut bolts out , you can use a jackstand to support the hanging assembly after you remove the lower strut bolts
You seem to work on a lot of Altimas and they aren’t old cars. On the other hand not many Camrys and Accords seem to come into your shop. Thanks for letting us know to stay away from Altimas.
Meh, I got a 16 with over 225k and only general maintenance done. I'm just now needing to replace a bad wheel bearing making noise. Honestly I'm so happy with my Altima I would put a new Trans in it if it went out.
Yeah... I got a 2012 with a 170k I personally put the last 130 on it and I’m just now starting to have some problems. I can honestly say it served the hell out of me. But definitely time for an upgrade
It was a good video but now it occurs to me that I need a video of someone doing it in their drive way with a floor jack and jack stands. And I don't think that lower ball joint was all the way in when he attempted to put the keeper bolt in. The bolt should only need a light tapping if it's lined up with the groove. I was also wondering if it would work to get the ball joint started in the hole first, then push the control arm into place??? I guess I'll have to try it and find out. Thanks for a close up look at all this, bro. I appreciate it.
Liked and subscribed. Super easy to follow and clean video. I’m in New Mexico working and I paid to have it fixed but I’m sure they got over on me, I will be doing it myself now!
Yard mon, yuh bloodcleet. I have 2015 Nissan Altima with 355,000 miles. Trying to change cv axle right now. No need to take off control arm.take it off up top at steering knuckle or whatever you call it
I have a 2019 nissan altima. I am going to try and fix both axels soon. Can you please tell me what is the name of the tool you use. Impact wrench?. What brand is it?.
Hey man I replaced my cv axle for my 13 Altima and now I have the tpms traction control and abs lights on and a check engine line p0500 which is the speed sensor and idk what to do
Thank you for that video. Now that I have replaced the CV axle, I have to top up the transmission oil. Do you know how to do that if the top-up-screw is not possible to be removed anymore? I hard I could do it via the speedometer access point? Thanks!
It gives you more room this way, but the strut way works if you can do it with the limited room. If you have to take the whole thing, bracket and all apart you will end up removing it anyway...lol
Mine is stuck. I watched another video where it was stuck and he took the middle brace out and then pounded it off to install the new one. I don’t want to have to do that. Is there any other way to get it out?
Seems like nice guy/mechnaic n detailed video... but over detailed... for the diy guy or any novice mechanic on flat rate job Do not remove control arm..as with all cars where struts bolt to knuckle which is majority if not All asian cars, simply remove 2 strut bolts, outter tie rod bolt(which usually isnt necessary) and that gives more than enough access / movement to easily remove axle(s)... If your charging by the hour then yes remove lower arm, might as well do otter tie rod and sway bar links if yah want..... but def not needed and waste of time
Nissan wants to charge me for this whole thing 1100$ too much parts cost 135$ at AutoZone and wants to charge like 970$ for the labor by looking at your video looks like i can do myself and save 970$
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
For anyone about to do this job you DO NOT need to remove the lower control arm as shown in this video , just let the assembly hang after you take the two lower strut bolts out , you can use a jackstand to support the hanging assembly after you remove the lower strut bolts
This the method for us who have lifts
@@alejandronava2295 THAN U WOULS NEED AN ALIGNMENT AFTER REMOVING IT ANYWAYS
@@alejandronava2295 When you remove the control arm likethat youll have to redo alignment right ?
@@alejandronava2295 Hey what about the CV Axle Shaft Carrier Bearing Bracket do you have to replace that ?
I like the way he shows the process
You seem to work on a lot of Altimas and they aren’t old cars. On the other hand not many Camrys and Accords seem to come into your shop. Thanks for letting us know to stay away from Altimas.
I got a 2020 60k miles and mines going out now.
I have a 2013 cv 2.5 and that thing is a champ, most people probably treat them like shit. 190 k and barely done any work
Meh, I got a 16 with over 225k and only general maintenance done. I'm just now needing to replace a bad wheel bearing making noise. Honestly I'm so happy with my Altima I would put a new Trans in it if it went out.
Yeah... I got a 2012 with a 170k I personally put the last 130 on it and I’m just now starting to have some problems. I can honestly say it served the hell out of me. But definitely time for an upgrade
I appreciate the video you make on Altimas! Thanks you!
Always a clean shop 👍🏿sign of a good mechanic and person.
Bro NUFF RESPECT bro bro
My CV Need changing now and i been wanted some help like this this video is the BIGGEST HELP EVER
Where you buy ur axels ?
It was a good video but now it occurs to me that I need a video of someone doing it in their drive way with a floor jack and jack stands. And I don't think that lower ball joint was all the way in when he attempted to put the keeper bolt in. The bolt should only need a light tapping if it's lined up with the groove. I was also wondering if it would work to get the ball joint started in the hole first, then push the control arm into place??? I guess I'll have to try it and find out. Thanks for a close up look at all this, bro. I appreciate it.
Axel did not just pop out right and I have a 2019….
Liked and subscribed. Super easy to follow and clean video.
I’m in New Mexico working and I paid to have it fixed but I’m sure they got over on me, I will be doing it myself now!
Yard mon, yuh bloodcleet. I have 2015 Nissan Altima with 355,000 miles. Trying to change cv axle right now. No need to take off control arm.take it off up top at steering knuckle or whatever you call it
355,000 miles😮😮😮😮😮😮 sheeeeesh I didn’t kno Nissans cud run that long
I have a 2019 nissan altima. I am going to try and fix both axels soon. Can you please tell me what is the name of the tool you use. Impact wrench?. What brand is it?.
U are the best bro
Hey man I replaced my cv axle for my 13 Altima and now I have the tpms traction control and abs lights on and a check engine line p0500 which is the speed sensor and idk what to do
Thank you so much for this video ! How long does it take ? And cost with parts?
great video but curious since you are in there... how come you dont replace the transfer case seals ?
Bro thanks for ur help...
Great video fam!
Great tutorial as always mon Respect!
Thanks again broski
Thank you for that video. Now that I have replaced the CV axle, I have to top up the transmission oil. Do you know how to do that if the top-up-screw is not possible to be removed anymore? I hard I could do it via the speedometer access point? Thanks!
Thank you for the video it made it so much easier for me. Wish I had a lift also.
Just the video I was looking for!
How much does it cost to get both replaced?
Thanks,
Great video but how did get it out without removing the bearing housing I did one I had to take the housing out and bang the axle out. But good video
Can u show a clip of the sound it makes to know that it’s the axle.
When i make sharp turned at low speed it’s a knuckle cracking sound.
Mine does too
My mom’s make a loud squeak when she turns right
OUTSTANDING!!!
Yeo thank u bro
Will a bad cv axle cause a wobble going over 50mph?
Why not just take the two strut bolts out and rock the assembly down?
It gives you more room this way, but the strut way works if you can do it with the limited room. If you have to take the whole thing, bracket and all apart you will end up removing it anyway...lol
It does sa rear in some model is that true there is rear axle?
Can somebody tell me what part number for the right one , I've been giving the Wrong one twice from auto zone?
Big up boss
Do you have any videos doing coolant flushes?
Mine is stuck. I watched another video where it was stuck and he took the middle brace out and then pounded it off to install the new one. I don’t want to have to do that. Is there any other way to get it out?
Nothing is ever easy brother
Good content bro
How much should this cost at dealer ??
Where did you buy the axel??
Autozone
Is this the same for 2016 Altima sv ?
You don't have to move the lower control Arm... this guy making me wonder why😢😢😢
Seems like nice guy/mechnaic n detailed video... but over detailed... for the diy guy or any novice mechanic on flat rate job Do not remove control arm..as with all cars where struts bolt to knuckle which is majority if not All asian cars, simply remove 2 strut bolts, outter tie rod bolt(which usually isnt necessary) and that gives more than enough access / movement to easily remove axle(s)... If your charging by the hour then yes remove lower arm, might as well do otter tie rod and sway bar links if yah want..... but def not needed and waste of time
yo bro can you send the link for were i can get nissan parts i cant find CV Joint in Maryland.
Try ebay or Amazon
Good work
Nissan wants to charge me for this whole thing 1100$ too much parts cost 135$ at AutoZone and wants to charge like 970$ for the labor by looking at your video looks like i can do myself and save 970$
I'd rather you do this for me lol
it dont come out that easy lol, im doesnt move
just comes out? yeah no. sure as sh*t doesnt