As soon as I saw the shell my heart broke. That's an EXTREMELY rare go cart shell for a miniature 1977 Plymouth volare roadrunner. I paid $1500 for the one I have alone.
I think you may have permanent engine damaged, scored cylinder, damaged head gasket, or maybe valve issues. EDIT: now that I have seen what it's doing, I now think it's a bad carburetor.
i love it man i would love to build one just like yours :) it looks like so much fun. and btw even if its slow it can still be fun you can use it to go mudding...
1. change oil and put new gas in it (as another commenter said) 2. change the fuel line(s)- maybe they are degrading from the inside out 3. something wrong with the keyway on motor shaft?
you over revved it and the connecting rod stretched allowing the piston rings to ram into the ring Ridge causing them to crack or crush or even crystallize. that engine will now burn oil and smoke until you replace the piston rings lol. when you stretch an engine out like that do it over a period of time to wear the ring Ridge down slowly then you can wrap it out as much as you want. but that's what caused the smoking lol.
no cant be that...once the bowls filled it should run off that for about 20 mins...this is starting and stopping in the matter of seconds...it couldnt possibly be burning a whole bowl of fuel in that time.
+The Moto Channel U.K it does not take 20 min of run time off the bowl. more like 30 seconds to 2 min. depending on the fuel flow. check inside the gas tank for a mesh type filter. they plug up easily. take your carb to a shop and ask them to put it in a sonic cleaner. that's the best way to clean the carb. small passages don't clean out with just carb cleaner.. I work on small engine as a career. 99% of all problems are related to fuel
The body is most certainly based off of the Mustang II Cobra. It's old as hell and I seriously doubt anyone makes these anymore. I don't know the company that made them or if they made variants. good luck hunting one down
thats weird how the motor keeps shutting off. I know mower motors are made to last long and take a beating so it cant just be an old engine. Have you checked the timing, valves, compression, etc. all of these things can be hard to identify especially from the outside. The motor doesnt sound like it running bad but it sounds like its being starved for fuel. maybe check the gas line and see if they are gunned up and see if there is fuel pressure. if its doing bad on inclines it might not have enough fuel pressure to work against gravity and get the fuel to the engine. Just a thought great vids man i love the channel.
Hey bro I a go kart jacked up like that mine turns off every like 20 secs in till I cleaned the carborator it never done it again now it runs like a beast
Love the body! It's like a old gto or something. You do some fun projects! Wish I had a welder and access to a bunch of steel when I was growing up. Also hopefully you've greased the joints by now
I started up a edger that had not been used or tuned in 10 years. and it worked just fine XD. had to put oil and gas in it cause it had none. all of it had been drained out. just shows how good it is to not store your machines outside and suck the gas and oil out before storage.
+rather B welding Hi dude!! An old suscriber here. I think that i know what the problem is, if the engine is running with the governor, the carburator has a spring sistem that makes throttle goes up or down as is needed to keep the engine runing, if you took off one of those springs(or maybe if it poped off), as rev go a bit high the governor is going to set the throttle down and with out that spring throttle wouldn't go up again as revs go down so the engine is gonna stop with out sense. I had exactly the same problem a time ago. I hope i had helped you, is nice to see your channel grow up. PD: If there is a spring between the throttle cable line (that cames from the pedal), and the carburator there are more chances of that being the problem. I'm SURE that that is.
Crazy impressive to see how far you've come since this video :)
I was watching this too today.. jajaja crazy
🤣🤣🤣🤣 from today standards you have come a long way.
2019 anyone?? Over a 2 years time you’ve grown up great video
I love your work and video and the go cart
that makes my grandma laugh she said her lawnmower can beat that! but she got run by a reindeer in a go cart!!!
esta chido😁😁😁😈😈😱😱🙌
As soon as I saw the shell my heart broke. That's an EXTREMELY rare go cart shell for a miniature 1977 Plymouth volare roadrunner. I paid $1500 for the one I have alone.
2:00 "aww fuck!" in the background XD that killed me
I like that go kart it's always nice to see something different
That thing sound like a badass monster truck!👏
Great video! I can't wait till she's running perfectly!
Sorry But I Like How To Make A Back To The Future Go Kart Wayyyyyyyyyyyyyyyyyyyyyyyy Moooooooooooorrrrrrrrrrreeeeeee But Still This Is Quite Cool😄
Hello!!!
I'm from Brazil!
Congratulations!!!! So good...
I think you may have permanent engine damaged, scored cylinder, damaged head gasket, or maybe valve issues.
EDIT: now that I have seen what it's doing, I now think it's a bad carburetor.
what ? it's burning oil ffs its been over reved. valve seals or piston /rings
Agreed ..its not getting a full bowl of fuel .
thats BAD ASS freaking great i feel so much murica right now
best go cart body ever
my gokart did the same and I bot a new carburetor and it works perfictly
It's not getting gas to the float bowl fast enough. As soon as you start giving it gas, you suck the float bowl dry. Or the main jet is plugged.
it's all good.. at least you made something.. more than most of us can say.
omg.. this is like how monster trucks started.
i love it man i would love to build one just like yours :) it looks like so much fun.
and btw even if its slow it can still be fun you can use it to go mudding...
+Firm Clock you dont look stupid on it i think its cool looking
Nice job I couldn't build one 😊
That's so cool I want one
That car body looks like a 1976 Plymouth Volare.
dude, where did you get that body?? that things worth a fortune!!!
Do you still have this and cam it make a come back
bad gas or clogged main jet
You still have this go kart ? I had the same fiberg
In the words of John From carsandcameras it's a Stump puller lol
oddly relevant 2 years later
we're did you get and how.much was the gear box
did you try to change the sprocket of the gear box from small to big p.s the bis one with the shaft and the small one with the gearbox
do a compression test on it
i2aspire it obviously has compression if it’s idling
1. change oil and put new gas in it (as another commenter said)
2. change the fuel line(s)- maybe they are degrading from the inside out
3. something wrong with the keyway on motor shaft?
where did you get the car looking body?
Crazy , Crazy!!!!!😂
the little engine that could😂😂😂
Hey please respond did you change the oil no do a compression test and check the valves
And check if it's getting spark
did you clean the fuel hole in bolt to the fuel bowl.
Yo I love your videos
you over revved it and the connecting rod stretched allowing the piston rings to ram into the ring Ridge causing them to crack or crush or even crystallize. that engine will now burn oil and smoke until you replace the piston rings lol. when you stretch an engine out like that do it over a period of time to wear the ring Ridge down slowly then you can wrap it out as much as you want. but that's what caused the smoking lol.
That's an awesome go-kart *:D*
Where did you get that?
My truck has the same paint job as the white and silver ford
Was is a stuck float ?
how did you make it i want to make one now
Hur fort går den?
try changing the gas line and filter this helped me
its the fuel filter I bet. it sounds like its running out of gas. fuel filter isn't flowing fast enough to keep the float bowl filled
no cant be that...once the bowls filled it should run off that for about 20 mins...this is starting and stopping in the matter of seconds...it couldnt possibly be burning a whole bowl of fuel in that time.
+The Moto Channel U.K it does not take 20 min of run time off the bowl. more like 30 seconds to 2 min. depending on the fuel flow. check inside the gas tank for a mesh type filter. they plug up easily. take your carb to a shop and ask them to put it in a sonic cleaner. that's the best way to clean the carb. small passages don't clean out with just carb cleaner.. I work on small engine as a career. 99% of all problems are related to fuel
It's either bad gas or bad oil or water in your gas or rings are fried keep trying to put it in 6th and floor it
Ya
Panda Modified I'm with you
How much gas did you have?
what's that car shell called, like how do you get one and are there different car models???
The body is most certainly based off of the Mustang II Cobra. It's old as hell and I seriously doubt anyone makes these anymore. I don't know the company that made them or if they made variants. good luck hunting one down
come to think of it... it kinda looks like a Dodge Aspen to. lol
thats weird how the motor keeps shutting off. I know mower motors are made to last long and take a beating so it cant just be an old engine. Have you checked the timing, valves, compression, etc. all of these things can be hard to identify especially from the outside. The motor doesnt sound like it running bad but it sounds like its being starved for fuel. maybe check the gas line and see if they are gunned up and see if there is fuel pressure. if its doing bad on inclines it might not have enough fuel pressure to work against gravity and get the fuel to the engine. Just a thought great vids man i love the channel.
Hey bro I a go kart jacked up like that mine turns off every like 20 secs in till I cleaned the carborator it never done it again now it runs like a beast
no dude you don't look stupid in that you look amazing
it's good at stalling :)
Also it doesn't look dumb. Actually pretty sick for what it is
please please please for the love of god GREASE THOSE BEARING UGA!!!!
have you tried to clean the fuel jets??
valve adjusting ?
Are you going to paint it?
check the flywheel key. It could be sheared a bit giving you trouble.
+jeep2003 im pretty sure this is what it is. magneto is getting intermittent burst which is why it even runs at all
do you have the motor from the trike
how many hp motor does it have?
+Luka Esitashvili 12.5
+your avarage dirtbike rider let me buy it
celbky
I'm thinkin that body is 76 Aspen or Volare?
Nice👍
Love the body! It's like a old gto or something. You do some fun projects! Wish I had a welder and access to a bunch of steel when I was growing up. Also hopefully you've greased the joints by now
كلش حلو بس السيارة بطيءة
You should bring this thing back
Hey. Donate that monstertruck to some kid. 😂
Opposed twin!
fuck davis
Brian Steckman why? Just why!?!?
did you put gas in it
That´s a Dodge Dart '77-'79?
I wish i could build stuff like that
Why is the blower sticking out the roof?
This is actually pretty cool, with the engine being that close to the seat does it get hot or melt the seat?
sounds like either the carburetor or the oil sensor.
harbor freight
did you clean the jet if not you should clean it and put new gas in it just in case the old gas had water in it
is that go kart body of a 1978 ford mustang king cobra!
I started up a edger that had not been used or tuned in 10 years. and it worked just fine XD. had to put oil and gas in it cause it had none. all of it had been drained out. just shows how good it is to not store your machines outside and suck the gas and oil out before storage.
I would drive there anywhere and everywhere around me where I live
+rather B welding Hi dude!! An old suscriber here. I think that i know what the problem is, if the engine is running with the governor, the carburator has a spring sistem that makes throttle goes up or down as is needed to keep the engine runing, if you took off one of those springs(or maybe if it poped off), as rev go a bit high the governor is going to set the throttle down and with out that spring throttle wouldn't go up again as revs go down so the engine is gonna stop with out sense. I had exactly the same problem a time ago. I hope i had helped you, is nice to see your channel grow up.
PD: If there is a spring between the throttle cable line (that cames from the pedal), and the carburator there are more chances of that being the problem. I'm SURE that that is.
My death trike had exactly that same problem. It's a bad carb diaphragm I think
+Offroad circus Hey i thought you were dead. haven't seen any video for almost a year
I just want the body!
Bro that’s sick I need to make one o and try a different gear ratio it will make it lot faster
That body looks like a Dodge Aspian or Plymouth Volarie really cool.
bro that is so dooope you should put nitrous in it .
You have to let it sit and warm up 😂😂😂
no you don't because I got one lier my red 300$
PLZ PLZ TELL AS how did u make it
Sounds like your float bowl to me. Gas isn't filling it up fast enough.
You should revamp this thing make it way better
how do you make it a high lift
Worlds Fastest Cameraman !
Why not put a small bike engine. Grt work though dude
cool car
you dont have a clutch on it do you?
what kind of go kart is this
nice job, is so coOl :D
Ha Ha Ha !!! very funny
I like it