Thank you for the Tut Tammy, well done! Is there a way to use Lut stacking where we could use more than one Lut at a time on a single clip? If not do you know a workaround?
Hello Tammy. I installed LumaFusion on my iPad Pro. I started by making a slide show, without problems. Then I took care of a video shot with my drone. I asked in my previous message if there is a way to put a gradient in the sky to darken. I did not find this function in the tool palette. In the meantime I have pasted one of my imported gradients on the film by adjusting via Fade and Darken. It’s not very professional. Is there another way? Thank you in advance for your answer. Frank S.
Frank Smout Images Do you see the sliders? Use the sliders and tweak the settings. Can you maybe send me a portion of the drone video so that I can make a tutorial for you?
Whackamole. Haha. So true. Rewinding four times to see what tiny button out of 200 options is changing, just slightly. Question: Do you know why, when I want to lift a title (or inserted photo), I cannot? How can I lift or move it from the back end of the timeline and drag it to somewhere near the beginning? Hope it’s just an easy answer for ya. Thanks, Carey
I will sometimes run into glitches with LumaFusion where I have to reboot it. It’s actually happened a few times during the tutorials, perhaps try that because you should be able lift something out of your timeline and hold it to the left of the screen to get it to scroll to the beginning.
Thank you for the tut Tammy, i have a queston... if i have two clips recorded at the same condition in the same place but with a different white balance, how can i correct this?
Hey Tammy. I'd love to hear more about your overhead camera. I agree with what you're saying about trying to follow the screen record how to videos. Many I have watched and rewatched and still didn't get it. Your overhead camera made this learning so much more meaningful. Also, on your intro, have you ever gotten pushback? I'll be honest, I'm not fond of it. Sorry for the criticism, I do love watching your videos.
Thanks in advance , just a small recognition , the part where u filming ipad to show us how u correct , its quality not that good and makes me not be able to recognize the changes perfectly , hope u adjust the lighting
Hello Tammy. I start in video thanks to my Mavic Mini drone. In photo I usually darken the sky with a gradient. i Movie that I use to start with, doesn't allow it. Final Cut Pro does it, but for me, it's too expensive. Does Luma Fusion, or another program, do that. Thank you in advance. Frank S.
Yes it does! Listen, this will be the best $30 you ever spent. You can make it darker or lighter, tweak individual colors, contrast, saturation....basically everything you need to correct.
So I’m looking at your drone footage. You don’t need a sky gradient. You need an ND filter for your drone my friend. When you said gradient for the sky I was thinking you wanted to deepen the blue of the sky. This is severely blown out footage. You could do a sky replacement but that building messes up the look of it really. If you had a neutral density filter on the drone this wouldn’t happen. Your sky would be blue, we’ll as long as it’s not overcast I should say. Do you understand this? I hope I worded this right for you.
Thanks for this video. I liked the fact that you took a real life example and followed the whole process, from purchasing LUTs to applying and comparing different results. I use an app called Video LUT. It has hundreds of LUTs that can be imported into LumaFusion. I often find the right LUT that transmits the feeling that I want to convey (or mistake that I want to correct)
Very helpful tutorial, thank you.
Hi Tammy , could you please tell me about luts where we from ? I m using lumafusion
I like the way you give real world example and elaborating it. More videos from you and more power to you!
Thank you so much!😉
Hello thanks very helpful.saludos
Thank you for the Tut Tammy, well done! Is there a way to use Lut stacking where we could use more than one Lut at a time on a single clip? If not do you know a workaround?
Unfortunately not but you can tweak the colors in the originals panel. I’m going to update this video this week though.
😆 the amount of excitement I had when I saw a woman talking about these subjects!!! Go you boo!!! Wish your channel much success!! Got a new sub ☺️
😘Haha. Thank you so much! Any requests for future videos? Lay em on me👍
Tammy Sypniewski hm 🤔 I’ll let you know when I think of something. Maybe some on color correcting and grading .
Great video and very informative! Your style of teaching is on point and confident. looking foward to more videos.
Alex Yadel Thanks Alex!
Thank you so much! This was the most helpful tutorial on CC and Luts I have found
James D Thanks so much James!
I like the way you explain but, i when you show the Ipad, it is little dark so I always put Maximum brightness on my screen.
Great video with information very useful for new users of LumaFusion. Thank you!
😉 Thanks for watching.
Hello Tammy. I installed LumaFusion on my iPad Pro. I started by making a slide show, without problems. Then I took care of a video shot with my drone. I asked in my previous message if there is a way to put a gradient in the sky to darken. I did not find this function in the tool palette. In the meantime I have pasted one of my imported gradients on the film by adjusting via Fade and Darken. It’s not very professional. Is there another way? Thank you in advance for your answer. Frank S.
Frank Smout Images Do you see the sliders? Use the sliders and tweak the settings. Can you maybe send me a portion of the drone video so that I can make a tutorial for you?
Frank Smout Images my email: tammyski2020@gmail.com
Whackamole. Haha. So true. Rewinding four times to see what tiny button out of 200 options is changing, just slightly.
Question: Do you know why, when I want to lift a title (or inserted photo), I cannot? How can I lift or move it from the back end of the timeline and drag it to somewhere near the beginning? Hope it’s just an easy answer for ya.
Thanks, Carey
I will sometimes run into glitches with LumaFusion where I have to reboot it. It’s actually happened a few times during the tutorials, perhaps try that because you should be able lift something out of your timeline and hold it to the left of the screen to get it to scroll to the beginning.
Thank you for the tut Tammy, i have a queston... if i have two clips recorded at the same condition in the same place but with a different white balance, how can i correct this?
guerino maione Just tweak the color sliders until they match. If you have affinity photo you could fix the white balance in there.
@@tammysypniewski1891could you share a tut? I tried but i was not able. Sorry for my english..
thank you ..good information
Thanks for watching!
Hey Tammy. I'd love to hear more about your overhead camera. I agree with what you're saying about trying to follow the screen record how to videos. Many I have watched and rewatched and still didn't get it. Your overhead camera made this learning so much more meaningful. Also, on your intro, have you ever gotten pushback? I'll be honest, I'm not fond of it. Sorry for the criticism, I do love watching your videos.
Thanks in advance , just a small recognition , the part where u filming ipad to show us how u correct , its quality not that good and makes me not be able to recognize the changes perfectly , hope u adjust the lighting
This is a very old video, I've made a lot of changes. Just built a new office so hopefully it will be even better.
Hello Tammy. I start in video thanks to my Mavic Mini drone. In photo I usually darken the sky with a gradient. i Movie that I use to start with, doesn't allow it. Final Cut Pro does it, but for me, it's too expensive. Does Luma Fusion, or another program, do that. Thank you in advance. Frank S.
Yes it does! Listen, this will be the best $30 you ever spent. You can make it darker or lighter, tweak individual colors, contrast, saturation....basically everything you need to correct.
Great. This is what I really need. Thank you so much. Frank by Frank Smout Images
Frank Smout Images Good luck Frank👍
So I’m looking at your drone footage. You don’t need a sky gradient. You need an ND filter for your drone my friend. When you said gradient for the sky I was thinking you wanted to deepen the blue of the sky. This is severely blown out footage. You could do a sky replacement but that building messes up the look of it really. If you had a neutral density filter on the drone this wouldn’t happen. Your sky would be blue, we’ll as long as it’s not overcast I should say. Do you understand this? I hope I worded this right for you.
Thanks for this video. I liked the fact that you took a real life example and followed the whole process, from purchasing LUTs to applying and comparing different results. I use an app called Video LUT. It has hundreds of LUTs that can be imported into LumaFusion. I often find the right LUT that transmits the feeling that I want to convey (or mistake that I want to correct)
Thanks. Glad you liked it.
Over speaking 💤
Not sure what that means. I talk too much? LOL. Never heard that before. LOL