Other videos show you have to remove the grill to replace the headlight. The video did not show you removing the mounting bracket but it appears you did so, is that correct?
@@tanyah2524 yeah I'm sitting here with a pair trying to figure out how to get the plate off the new ones w o busting something....thanks for nada 1A auto
But, there is an adjustment screw to adjust the headlight beam in or out. No one talks about that. Do you have any ideas about how that needs to be set?
So do you need to remove the grill to install or not? Your video show that grille removal is not required but every other video on youtube shows that you do need to remove the grille?
Thanks for this other '96 Sierra vid' . I was hoping that just removing the headlight component, via from above the long-shanked screws and leaving the original mounting bracket as-is would not have to re-aim the OE style headlights, but since the aiming screws are within the replacement HL component, not the 'frame' mounting bracket, best to set-up for adjustment process ! :-l Since the chances of the new replacement being the same are pretty slim, 1% eh !? 🙂
The studs on mine just spin in the headlight housing and a metal cutting blade from an oscillating tool doesn't reach in far enough to cut them. And ideas?
You totally skipped some steps. The headlight part you first showed is different than what you installed and you only adjusted beam height not l/r angle.
pulling my hair out!! i have a 1993 and the side marker lights are a single solid piece.. EVERY kit and replacement lights i find have two separate pieces for the side marker lights. They claim 1990-1998 compatibility for these kits, but obviously don't fit a 1993.
+John May Here is a link to the replacement headlight section on our website for your vehicle. If you have any questions we can help you out www.1aauto.com/1993-chevy-k1500-truck-headlight-assemblies/y-mo-c/1993-1518-19?TH-cam&CTA%20Comment&ATony
Mike or anybody at A1Auto ok does anyone know how I can get the stripped bolts out of my GMC 1999 c2500 headlights bracket? So I can change a burn out Bulb !! Please give me and idea some one
Can you help me find bulbs for the little tiny lights to the left and right of the turn signals? The little side marker lights? I can't find any info anywhere and the guy at AutoZone said they couldn't figure out what I meant.
+Lendercl You may need to use some force to get it out but be careful as you do not want to damage the wiring harnesses. You may also want to see if there are any other videos that someone posted with the same issue as you are having ans see how they did this.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Other videos show you have to remove the grill to replace the headlight. The video did not show you removing the mounting bracket but it appears you did so, is that correct?
@@tanyah2524 yeah I'm sitting here with a pair trying to figure out how to get the plate off the new ones w o busting something....thanks for nada 1A auto
Love how you make it look like it just pops in there. Cut out all the struggle footage.
But, there is an adjustment screw to adjust the headlight beam in or out. No one talks about that. Do you have any ideas about how that needs to be set?
Not sure why i gotta take my whole grill. And all your removing is two screws? Videos off!!
Video really helped me change my light bulb
+Ninja Human Turtle We are happy to hear that!
What you guys do if the removal screws break or strip?
So do you need to remove the grill to install or not? Your video show that grille removal is not required but every other video on youtube shows that you do need to remove the grille?
You definitely don't need to take the grill off. I did mine with the grill on.
Good Question!!
@@tiaseanetherton8626 all the headlights come w backing plates how do I get them off ? Thanks
What about the resistors and flasher?
I found that the 4 mm socket fits better.
My one stud is stuck how do i remove that one stud
Will this not be the same as an 88-98 Chevy 1500?
How do you remove the bracket? Was unaware when I bought these they'd some with a bracket. Thanks
Do y’all have a set of these that come with led bulbs?
Thanks for this other '96 Sierra vid' .
I was hoping that just removing the headlight component, via from above the long-shanked screws and leaving the original mounting bracket as-is would not have to re-aim the OE style headlights, but since the aiming screws are within the replacement HL component, not the 'frame' mounting bracket, best to set-up for adjustment process ! :-l
Since the chances of the new replacement being the same are pretty slim, 1% eh !? 🙂
+Rockinbr Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
The studs on mine just spin in the headlight housing and a metal cutting blade from an oscillating tool doesn't reach in far enough to cut them. And ideas?
I'd like to thank you for the video, you guys are professionals for good reason.
+R Monkey Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Need to know how to replace
Thank you, another good video
+Stewart V Clark Thanks for checking us out! 1AAuto.com
Thank you that was very helpful😅
do you have headlight assemblys for a 1989 k1500? I have the 4 peice lights all the aftermarket lights I see are the 2 peice
+Mason Stevenson Here is what we have listed as fitting this vehicle. goo.gl/2DcEfR
So u took the big bracket off the back
What light bulb does the 90 Sierra use
What tools u use to do the adjustment for the light bulb
I got some lenses and the headlight itself I can slightly wiggle would tighting them 3/16 bolts fix that
All the lights come on except the headlights. Could you tell me why? Thanks
Are amazon headlights case any good ?
Thanks,
+Peter Thrun Thanks for checking us out! 1AAuto.com
You totally skipped some steps. The headlight part you first showed is different than what you installed and you only adjusted beam height not l/r angle.
pulling my hair out!! i have a 1993 and the side marker lights are a single solid piece.. EVERY kit and replacement lights i find have two separate pieces for the side marker lights. They claim 1990-1998 compatibility for these kits, but obviously don't fit a 1993.
+John May Here is a link to the replacement headlight section on our website for your vehicle. If you have any questions we can help you out www.1aauto.com/1993-chevy-k1500-truck-headlight-assemblies/y-mo-c/1993-1518-19?TH-cam&CTA%20Comment&ATony
Mike or anybody at A1Auto ok does anyone know how I can get the stripped bolts out of my GMC 1999 c2500 headlights bracket? So I can change a burn out Bulb !! Please give me and idea some one
big charlie wilcox same thing with mine. I am getting new ones though
Can you help me find bulbs for the little tiny lights to the left and right of the turn signals? The little side marker lights? I can't find any info anywhere and the guy at AutoZone said they couldn't figure out what I meant.
Can I get just the covers that go in front? I'm on a STRICT fixed income of 900.00. So would appreciate any help ya'll. D.B. Tulsa, Oklahoma
The bolt wont come out, it just keeps turning. if it's stripped what do i do?
+Lendercl You may need to use some force to get it out but be careful as you do not want to damage the wiring harnesses. You may also want to see if there are any other videos that someone posted with the same issue as you are having ans see how they did this.
@@1AAuto I ended up having to take the front fascia off and take the whoole headlight brackets off. Thanks for the response though!
This video is wrong there are not 2 screws on a 1994 k1500 suburban you gotta pull the grill
My screws on top just keep spinning