I used a string line for edging around my shrubs a few times in the past. Maybe I'm being too picky, but I found that when I laid the edging near the string it would sometimes lean on the string causing it to flex without me noticing so the line wasn't perfectly straight if it barely touched the edging. I wonder if I ever attempted to install my fence and the fence would also press against the line causing an angle? Or do you just have to get it as close as possible without it touching the line at all? I pull the string as tight as possible and I guess I am asking do you have to have it so perfect to where the fence can touch the string line without causing it to flex for a perfect fence line?
Great job. Looks like Ultra Aluminum, is it? Fantastic and instructional. Your logo looks a lot like ours. If you are not an Ultra Dealer, you should give us a call. Thanks.
its always easy when you watch it with a cup of tea in your hand ! but once you try it to do the job doors of hell will open wide LOL ... I always spend extra dollars and get someone to do the job right and tight from the first moment .. it will cost more to fix once its done wrong :)
not a bad idea with the screw to prevent it from pushing up during frost cycles, I wish they just came with holes like vinyl does. I also wish elite didn't use philips screws lmao
Since you entirely used the word though wrong and spelled it "tho" I'll assume you're an imbecile and not comment on how there wasn't a female in this video.
Yup, so make it easier by skipping steps, then you can have the crappy install you apparently want. Or you could try to make sense when posting a comment.
@@5ATX12 "My're" mouth wasn't open when I typed that. Let me waste time explaining your* folly. First you say the OP is at fault for "making it sound so complicated". Then you say that it must be done properly or it won't last. Which is it? Eliminate the complications of doing it right or doing it right (with requisite complications)? *correct spelling of the possessive pronoun
You must love Jehovah your God with all your heart and with all your soul and with all your mind and with all your strength. You must love your neighbor as yourself. Jesus the anointed is Lord! Repent and be baptized and believe the Gospel.
Your work is very professional and it helped me, thank you！
Thank you! My yard is about to look dope thanks to y'all!
😅😊l.p.pppp😊lp.😊p.ppl.😊lppl😊lllll😊pppppp😊p.llllllllllllll.lpppppp😊llllllpppppllp.😊pppppppppp.l😊😊lppppl0lp.plllll😊p😊😊lpmllllllp.😊pppplllllllllllllllllllllll😊lllp😊p.😊lllllllm😊l.😊llllllllppl😊😊p😊mlpm😊ppplm😊p😊pmlll😊pplp😊.😊lpl😊p😊plp0😊p.pp😊P
P.llpmp0l0ppppppp.pppp.ppk.😊p0
You guys rule! My doggie is going to be so happy 😁
Since your on a sloped land is the angle pre determined before panels are made or are you panels adjustable to fit to slope thanks
Our panels are adjustable to follow the slope. It is called "rackable". Thank you for the question!
thank you so much for this. Do you happen to know of someone in the Atlanta, Ga area who can install the fence?
I used a string line for edging around my shrubs a few times in the past. Maybe I'm being too picky, but I found that when I laid the edging near the string it would sometimes lean on the string causing it to flex without me noticing so the line wasn't perfectly straight if it barely touched the edging. I wonder if I ever attempted to install my fence and the fence would also press against the line causing an angle? Or do you just have to get it as close as possible without it touching the line at all? I pull the string as tight as possible and I guess I am asking do you have to have it so perfect to where the fence can touch the string line without causing it to flex for a perfect fence line?
Try using a post hole digger without a digging bar here in Pennsylvania and you will be digging for a long time.
damn this is very helpful haha thanks for the video!
im wish installing the fences we make was this easy haha
How far down in the ground for posts?
Can the panels be modified if i need to modified?
yes
Thanks for the video. Is the post bee free?
Great job. Looks like Ultra Aluminum, is it? Fantastic and instructional. Your logo looks a lot like ours. If you are not an Ultra Dealer, you should give us a call. Thanks.
Loved the video...I thought the whole time that when he cut through the fence with that saw he was hacking off the hand...that's crazy close..
My thoughts too! No need to be that close!
its always easy when you watch it with a cup of tea in your hand ! but once you try it to do the job doors of hell will open wide LOL ... I always spend extra dollars and get someone to do the job right and tight from the first moment .. it will cost more to fix once its done wrong :)
Thanks for the info. Looks easy enough. Might have to offer my services to mi Mama. Let's see how this works out : /
Great!!! Where’s that gate video? 🤷♂️
Where is this at
looks easy I hope I can do it
Is concreting three posts mandatory? I am not sure my fence guy used concrete
JC21JMC what did he use to fill up the holes? Im no proffecional but if u just fill it with dirt its gonna tilt depending how soft the ground is
For aluminum yes. Your fence will tilt and frost heave without it
I provide the mesh wire panel and plastic temporary fence feet. pls. contact with me as whatsapp:0086-13698650383 www.plasticpalletblowing.com
wambam system uses no concrete.
How long will this metal fence will last? The metal is buried directly into the concrete,, I'm a bit baffle. Don't you need a anchor of some sort?
He mentioned running one of the self tapping screws most of the way in so when the concrete dries around it, the post won't raise up
About how much was that project?
where was the gravel used in this process?
The gravel is use before pouring the concrete. It doesn’t show on the video, can also be used if the hole is too deep
Nice job !
Caico,I SEE WHAT THE ALUMINUM POST LOOK LIKE. ARE THERE WROUGHt IRON POST MADE LIKE THE ALUMINUM.
I forgot to have checklist. Nice to have seen this in vid
Los felicito desde cali colombia
can you explain the 2.13 more..
not a bad idea with the screw to prevent it from pushing up during frost cycles, I wish they just came with holes like vinyl does. I also wish elite didn't use philips screws lmao
well done that was great
good... I'll give it a try.
Great video !! Let me ask ,,On aluminum posts, do you need gravel before pouring concrete ?? If so how much gravel ??
No. Gravel is mainly used with wooden posts to allow for drainage so the wood does no rot over time.
2
I hope I get it right
How much for feet
sounds pretty good to me.
The dash is really like a dot for the website name
People also need to survey their Property so they don't Fence in A portion of their neighbor's yard Or block Public right away.
I*
I’m in way over my head
Nice work but this is just a simple aluminum Lego fence. Cheap stuff
What’s her ig tho what’s her name 🤔😅?
Since you entirely used the word though wrong and spelled it "tho" I'll assume you're an imbecile and not comment on how there wasn't a female in this video.
no sound or no music sorry go to the next video
Electric screwdriver
You guys made it sound so complicated. A fence like that will not last if not done properly.
That wasn't complicated, it was informational. More info is better than not enough.
Yup, so make it easier by skipping steps, then you can have the crappy install you apparently want. Or you could try to make sense when posting a comment.
@@scabscerte there's other ways to properly do an installation without skipping steps. If you haven't done any of it, maybe keep you're mouth shut?
@@5ATX12 "My're" mouth wasn't open when I typed that. Let me waste time explaining your* folly. First you say the OP is at fault for "making it sound so complicated". Then you say that it must be done properly or it won't last. Which is it? Eliminate the complications of doing it right or doing it right (with requisite complications)?
*correct spelling of the possessive pronoun
You must love Jehovah your God with all your heart and with all your soul and with all your mind and with all your strength. You must love your neighbor as yourself. Jesus the anointed is Lord! Repent and be baptized and believe the Gospel.