will try in like few months. i have not changed its thermal paste and didn't clean it in last 5 years. And believe me it DIDNT work in a clean enviroment at all (i used it in a wood workshop lmfao). Hopefully it will help its performance.
I have an asus n550jk and I suspect it's thermal throttling because the fans are not ramping up when running under gaming load. What would cause them to do this? I have just removed the fans and they are dirty, also the thermal paste job isn't the best. Would it be good that I clean and replace it? Another thing I noticed is the factory thermal paste leaked under the cpu little plastic cover and got all over the exposed pins, is this bad?
спасибо за видос, жаль без звука) кое-как снял радиатор, он аж прикипел, заводская паста, оказывается, вообще в камень обратилась (ноуту всего 2 года) после её замены, он даже запустился раза в 4 быстрее)
Muchas gracias por este buen video, Pregunto si la cantidad de pasta onductora para procesador no es excesiva, poner mucha aisla en lugar de transmitir el calor. De todos modos, EXCELENTE.
Thank you for your video and for the UK Amazon links. I have one question, what is the brush you're using? You don't mention it in the description box or on your website
my x550 speakers suddely no sound. Its not driver issue is hardware. Is speaker harware not working a common issue? how to replace speakers? any advice and which to replace? thanks
Tengo un portatil similar un x550l tiene 4 gb de memoria integrada en la placa base y un slot de memoria vacio , como en el video, le he puesto una memoria de 2gb en ese banco vacio pero no los reconoce, que puedo hacer para que me reconozca esa memoria adicional o que memoria debo de comprarle?
El. Mio venía ya con la otra puesta DDR3 de 4 GB más y hoy al hacerle mantenimiento y ponerla de nuevo no la reconoce y quedé jodido con las 4 GB q tenía antes no más jajaja
Asus x550c laptop,,, Red light in the display goes away after repairing from a local mechanics,,, So display become bluish yellowish,,, No red color option is found in display color calibration. My display in other laptop is ok,, External display also ok,,, What may be probable cause of red light absent?
Nice! I wanted to know, are the cpus soldered(fixed) or removable? I cant really tell from the video. I wanted to upgrade them if possible, please I need your advice.
It doesn't "just" overheat. First, you run into the TDP limits; immediately, clock speeds are throttled; and "only" after that, you wound up with your jaw-dropping 90C/194F... On both CPU _and_ GPU. Look. Core i5-6300HQ processors draw no less than 25+5 watts, 25 from cores alone, and at least 4.9 are spent on servicing PCI-E PHY (if discrete graphics are present and are under 100% load). You'd get these digits from reading a special register, exposed through Intel XTU or HWiNFO. Now, onto GTX 950M. The reference board with GM107, as measured by NVIDIA, consumes 60W. The PSU of ASUS K550 delivers 90 watts, so NVIDIA are definitely not exaggerating. Now, you tell me if a thing shown @ 11:25 can dissipate all that. An example of how you can read the current "PKG_PWR_SKU" value: www.notebookcheck.net/fileadmin/Notebooks/Dell/Inspiron_15_7000_7577/GTX_1050/stresstest_furmark_prime.jpg See "Table 1. A Comparison of Maxwell GM107 to Kepler GK107" for GM107 power target: devblogs.nvidia.com/5-things-you-should-know-about-new-maxwell-gpu-architecture/
It's an FPC connector, meaning you have first to unclip the cable manually before removing it. There's a little plastic part that you must turn up in order to be able to remove the cable. You can see it in the video, he is making 2 moves to get out each cable :) . Most of the time while disassembling electronics, you should not have to grab something hardly or you might damage it
@@hrouzn7612 can't now because I'm at work sorry. There should be a part number or reference on the cable, try googling it and you should find what you need
У мну экран при наклоне крышки Гаснет екран при некоторых углах наклона крышки, если на пару градусов повернуть крышку то картинка появляется что ето шлейф? можно сделать самому? денег не жаль лениво возить его туда-сюда сервис и т.д.
самому сделать можно, это либо шлейф, как Вы српаведливо отметили, либо матрица. Дигностируется следущим образом: снимается рамка: если дефект появляется\пропадает при перегибании\пережимании\шевелении шлейфа, то соответсвенно шлейф; если проявляется\пропадает, когда слегка пальцем нажимаете на нижнюю часть матрицы (на железную рамку) то тогда матрица; но кроме этого на всякий случай переподсоедените шлейф с обоих сторон, проблема может быть и в этом, хотя вероятность не велика.
I did this and ended up ruining the videocard of my laptop due to static. The screen of my laptop is just black even though it’s turned on. I won’t recommend doing this if you’re inexperienced and don’t have the proper tools such as gloves and static cloth.
Strange, I dismantled a PC, without a worry about it getting broken, if that counts as experience. And this has taken me a few hours but I didn't have such problems
Ok I somehow managed to reinstall the motherboard and I opened the laptop with half its screws screwed, like you promised the cleaning part seemingly works. My fan is usable again. But you guys left the job half-done, should have shown the reinstallation and I am too lazy to watch the video backwards, and too lazy to add another 0. So I rate this 1/10
Managed the re-installation but have a screw that got stuck and the whole case cannot close because of it, I am sleeping today and will cut or sand its tip off tomorrow
@@muhammederenalrz2703 For the record, I did not change the paste, like he does in the video. Yes, I am almost certain that you can exchange the HDD for an SSD, and yes, this will give you a massive speed boost. The boot time went from 2 minutes to 15 seconds for me. However, I have seen that in some cases the X550 doesn't have a HDD access, so you need to disassemble all of it in order to do it, like in the video. In addition, I highly recommend that you add some RAM if you still have a slot available. Just make sure it is compatible with the existing RAM: in my case, it needed to be the DDR3*L* - the L was important because it is less power demanding.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
***ENG: Links to screwdrivers and parts in the description under the video*
***RUS: Ссылки на отвертки и заменяемые детали в описании под видео*
0a?
Much work for today. Tomorrow, maybe.
Oh I see the motherboard is going to re-place itself, thanks FixIT for leaving me with a disassembled laptop liked your video!
just follow the steps backwards maybe?
@@emanuelxcars well, eventually I did that but it took some time
oh no. im about to do it, but thanks to this comment making me doubting my already dumb skill on cleaning
the x550 board is compatible with the x550c board? Thanks
Cleaning my shit filled laptop has always been my dream, thank you FixIT for making this possible!
which is the best cooling pad for asus x550c.. :( my temps are way too high for cpu its 75 to 80 and for gpu its 90 to 95...
x550 dont have vents for cooling pad ! :(
use vacuum
Apply better thermal paste.
will try in like few months. i have not changed its thermal paste and didn't clean it in last 5 years. And believe me it DIDNT work in a clean enviroment at all (i used it in a wood workshop lmfao). Hopefully it will help its performance.
I have an asus n550jk and I suspect it's thermal throttling because the fans are not ramping up when running under gaming load. What would cause them to do this? I have just removed the fans and they are dirty, also the thermal paste job isn't the best. Would it be good that I clean and replace it? Another thing I noticed is the factory thermal paste leaked under the cpu little plastic cover and got all over the exposed pins, is this bad?
спасибо за видос, жаль без звука)
кое-как снял радиатор, он аж прикипел, заводская паста, оказывается, вообще в камень обратилась (ноуту всего 2 года)
после её замены, он даже запустился раза в 4 быстрее)
good video apart from need better lighting
Thx .. should do cleaning and paste change.
thanks for video. do you can i put small thermal fins on video memory chips, is there place for them? i will buy accordingly
thank you kind stranger
Muchas gracias por este buen video, Pregunto si la cantidad de pasta onductora para procesador no es excesiva, poner mucha aisla en lugar de transmitir el calor. De todos modos, EXCELENTE.
How many months or years we should replace the thermal paste and clean the fan?
Once a year it's enough
Thank you sir!
thank you for the video, can you help me? what did you apply to black tape that between heatsink and fan? can it glued again?
Thank you very much ! !
Asus X550iu model is same process?
Можливо підкажете де можна купити якісну клавіатуру для Asus x550?
my flat cable(usb to motherboard, in the right side) burned, there is any problem to use the notebook without it besides a non working usb?
Anyone know where I can get a brush like that? I don't want to create static when cleaning
Can I put copper shims on the processor and gpu, if so what is the thickness?
Thank you for your video and for the UK Amazon links. I have one question, what is the brush you're using? You don't mention it in the description box or on your website
The white small ribbon cable is clued in the motherboard any idea how to remove it
my x550 speakers suddely no sound. Its not driver issue is hardware. Is speaker harware not working a common issue? how to replace speakers? any advice and which to replace? thanks
Tengo un portatil similar un x550l tiene 4 gb de memoria integrada en la placa base y un slot de memoria vacio , como en el video, le he puesto una memoria de 2gb en ese banco vacio pero no los reconoce, que puedo hacer para que me reconozca esa memoria adicional o que memoria debo de comprarle?
El. Mio venía ya con la otra puesta DDR3 de 4 GB más y hoy al hacerle mantenimiento y ponerla de nuevo no la reconoce y quedé jodido con las 4 GB q tenía antes no más jajaja
Thnx for video
@Taha Gameplay :D
Will it do on X550LA?
Asus x550c laptop,,,
Red light in the display goes away after repairing from a local mechanics,,,
So display become bluish yellowish,,,
No red color option is found in display color calibration.
My display in other laptop is ok,,
External display also ok,,,
What may be probable cause of red light absent?
I did this and now my pc won’t turn on 😭
Check the ribbon cables if they're all connecting right.
still not on ???
Muito obrigado!
спс за видео
What's the thickness of the fan cooler?
2 meters
Where are the Rams?
Per asus F550l va bene lo stesso? È lo stesso modello di smontaggio??
Non penso proprio
so what was that white thing on top of the prosessor you cleaned up?
thermal paste
Nice! I wanted to know, are the cpus soldered(fixed) or removable? I cant really tell from the video. I wanted to upgrade them if possible, please I need your advice.
They are fixed
knk bendede o bilgisayar var kaç tane ram slotu var sorabılırmıyım ram takvıyesı yapacagım
1
What are those things that you remove at 3:10? And where to buy them if broken? Thanks a lot :)
You cant broke them.
lmao I have no trust in myself doing this
GPU & CPU same heat pipe...does it overheat?
It doesn't "just" overheat. First, you run into the TDP limits; immediately, clock speeds are throttled; and "only" after that, you wound up with your jaw-dropping 90C/194F... On both CPU _and_ GPU.
Look. Core i5-6300HQ processors draw no less than 25+5 watts, 25 from cores alone, and at least 4.9 are spent on servicing PCI-E PHY (if discrete graphics are present and are under 100% load). You'd get these digits from reading a special register, exposed through Intel XTU or HWiNFO.
Now, onto GTX 950M. The reference board with GM107, as measured by NVIDIA, consumes 60W. The PSU of ASUS K550 delivers 90 watts, so NVIDIA are definitely not exaggerating.
Now, you tell me if a thing shown @ 11:25 can dissipate all that.
An example of how you can read the current "PKG_PWR_SKU" value:
www.notebookcheck.net/fileadmin/Notebooks/Dell/Inspiron_15_7000_7577/GTX_1050/stresstest_furmark_prime.jpg
See "Table 1. A Comparison of Maxwell GM107 to Kepler GK107" for GM107 power target:
devblogs.nvidia.com/5-things-you-should-know-about-new-maxwell-gpu-architecture/
3:10 I don't know how i put out that cable. Seems it attached really hard.
It's an FPC connector, meaning you have first to unclip the cable manually before removing it. There's a little plastic part that you must turn up in order to be able to remove the cable. You can see it in the video, he is making 2 moves to get out each cable :) . Most of the time while disassembling electronics, you should not have to grab something hardly or you might damage it
@@MrOratorio send me please link with this cable.. i break it
@@hrouzn7612 can't now because I'm at work sorry. There should be a part number or reference on the cable, try googling it and you should find what you need
У мну экран при наклоне крышки Гаснет екран при некоторых углах наклона крышки, если на пару градусов повернуть крышку то картинка появляется что ето шлейф? можно сделать самому? денег не жаль лениво возить его туда-сюда сервис и т.д.
самому сделать можно, это либо шлейф, как Вы српаведливо отметили, либо матрица. Дигностируется следущим образом: снимается рамка: если дефект появляется\пропадает при перегибании\пережимании\шевелении шлейфа, то соответсвенно шлейф; если проявляется\пропадает, когда слегка пальцем нажимаете на нижнюю часть матрицы (на железную рамку) то тогда матрица; но кроме этого на всякий случай переподсоедените шлейф с обоих сторон, проблема может быть и в этом, хотя вероятность не велика.
what pasta you use ?!!?! @How-FixIT
better to buy a new pc huh? jasus so much effort. I thought my MSI did me work, i was so wrong..
I did this and ended up ruining the videocard of my laptop due to static. The screen of my laptop is just black even though it’s turned on. I won’t recommend doing this if you’re inexperienced and don’t have the proper tools such as gloves and static cloth.
Static can be a bitch but all you have to do is touch the psu when you're working on PCs. Don't know about laptops.
Or maybe you didn't seat the screen ribbon properly. Try using an external display perhaps.
Strange, I dismantled a PC, without a worry about it getting broken, if that counts as experience. And this has taken me a few hours but I didn't have such problems
Planned obsolescence
тут проц впаеный??))) как его с i3 на i7 сменить?))))
Да, тут процессор намертво впаян.
My fan is not working after cleaning ..
do you plug it back?
Ok I somehow managed to reinstall the motherboard and I opened the laptop with half its screws screwed, like you promised the cleaning part seemingly works. My fan is usable again. But you guys left the job half-done, should have shown the reinstallation and I am too lazy to watch the video backwards, and too lazy to add another 0. So I rate this 1/10
Managed the re-installation but have a screw that got stuck and the whole case cannot close because of it, I am sleeping today and will cut or sand its tip off tomorrow
Today I was fixing my laptop, suddenly I dropped my cooler with thermo-tube. How can glue together? By tape or anything else to suggest?
i glued it with duct tape 3 years ago , works fine since
Разбирает глухонемой.
Что мне делать если я обрезал шлейф ?
Thanks a lot !
did you try it ?
@@muhammederenalrz2703 I did it, yes. Changed the HDD and did an in-depth cleaning.
@@cipritom can i attach sdd on x550c
@@cipritom have it changed speed on pc
@@muhammederenalrz2703 For the record, I did not change the paste, like he does in the video. Yes, I am almost certain that you can exchange the HDD for an SSD, and yes, this will give you a massive speed boost. The boot time went from 2 minutes to 15 seconds for me. However, I have seen that in some cases the X550 doesn't have a HDD access, so you need to disassemble all of it in order to do it, like in the video.
In addition, I highly recommend that you add some RAM if you still have a slot available. Just make sure it is compatible with the existing RAM: in my case, it needed to be the DDR3*L* - the L was important because it is less power demanding.