Modelling Staircase in Etabs 2016 [Beginners Tutorial]
ฝัง
- เผยแพร่เมื่อ 19 ม.ค. 2017
- Civilknowhow tutorials presents the modelling of staircase in etabs 2016.The tutorial provides step by step explanation on how to model staircase in etabs 2016 easily.Staircase modelling is not mandatory one in etabs, but still its explained in a way that can be easily followed for beginners in etabs modelling.The staircase modelling explained here is not just applicable to etabs 2016,but also with previous version of etabs.The staircase modelling has been explained in a commercial building with G + 2 floors in etabs 2016.This beginners tutorial explains the options of replicate and offset in etabs 2016.The tutorial only explains the modelling part,not the analysis.If you find this video regarding modelling staircase in etabs 2016 useful,please do like,share and comment this etabs 2016 begginers tutorial video
To subscribe the channel
/ @civilknowhowtutorials...
Like us in facebook:
/ civilknowhow
Visit our website for more:
www.civilknowhow.com
![RCC Slab Design in Etabs 2016 - Part 2 [Beginners Tutorial]](http://i.ytimg.com/vi/45GRnZfvyi8/mqdefault.jpg)
![RCC Slab Design in Etabs 2016 - Part 2 [Beginners Tutorial]](/img/tr.png)
![[ไฮไลต์] ฟุตบอลชาย ญี่ปุ่น vs ปารากวัย รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/X_BeGaAv1oM/mqdefault.jpg)
Love to see you guys back ! Thanks a lot
Indeed very much helpful tutorials for the beginners with all clarity. Thank you....
I would like to thank you for sharing such comprehensive videos. would you please applaud some tutorials for shear wall?
Thank you very much
very well explained, this video helped me a lot for doing my project
Thanks for video, it was quite helpful.
Easy to understood..,thanks and more videos required to learn E-tabs
Amazing videos buddy. I am comparing it with the videos made by CSI Incorporated (producers of ETABS themselves). I must say that you are equally good if not better. Keep up the great work.
Thank you...nice guidline.
Finally,Best Etabs trainer is back with another great video..!! Keep Uploading..!!
+Anubhav Garg sure
Hi. Sir i having trouble analysis when hit check error button no error but when I hit analysis it starting but not showing shear and bending moment I hope we will help me to solve this problem.thanku in etab 17
you are the boss amongst all youtube etabs teacher
+zahid hassan thank you
Thank You Sir
greetings sir. thank you for the classes
i'm final year civil engineering student
i'm planning to do project of commercial building using raft foundation with etabs 2016
it would be helpful if u guide me wt tutorials
VERY HELPFUL FOR LEARNER
Bht Bht shukriya
dhandewa
thank you, Cool !!
thank you ....please make a video of SAFE flat slab, SAFE foundation design, Raft, etc etc
Thank you sir
Thankyou sir
U r cool teacher
excellent bro the explaination and the audio clarity is superb. by this I even learn stair case modelling and if their is design part to it will be more helpful.
but one thing is that is it the ROBOT STRUCTURAL ANALYSIS and E-TABS are similar or we learn some more in that
Hello
hello sir, great thanks for your helping. but my question is that when i go down from top to bottom or vise versa there is no visible at what floor level it is shown me on the 3D part. how can i fix the problem on etabs 2016?
thanks sir
Great video , can you plz upload a video on how to model a ramp in etabs Thanks
@CivilKnow how
I just have a small question. I am modeling a timber (mass timber) core wall in place of concrete core wall. Can you please tell me how to find the forces in the wall joints as those timber walls have to be balloon framed with steel connections. I just wanted to calculate how much forces those connections would take up.
Please REPLY
Hello sir
Your tutorials help me so much in my ME project.. Sir plz upload video of modelling of damped outrigger
Structural analysis, SAP 2000, ETabs, and Finite element method
th-cam.com/channels/fZBo0T5G0W_rGYHAXfYIRw.htmlvideos
plz do a vedio for steel structure in etabs
Thank a lot
Hii
Thank you. can you please show that how to give a z value to a beam or slab??
in one project can we model few slabs as membrane and few as shell thin?
my interesting jobs!
Can u make video about importing dxf file & then dealing with column eccentricity..??
Modelling Staircase of two flights withing RCC building in Etabs 2016 please :)
What about landing beam creating a short column effect??
sir i have a question that by using this staircase it may create problem in diapragms action as in previous versions of etabs.diaprams taken at only horizontal slabs.
Thank you for the upload, can you make a video on how to model dampers for seismic protection on a building? Thank you in advance!
+TrajceZMKD sure
There is no problem, if the Stair-Slab appears as a Wall in the Model Explorer ?
Great videos sir. But I do have a doubt. when applying live load on staircase the option was 'replace existing loads'. Doesn't that mean it will replace the previously assigned dead load. So should we click 'Add to existing load' while assigning live load?
how blast loads can be applied
👍👍👍
Don't we have to assign joint restraints on staircase joints?
Make a video on assigning wind load
👏🏻
Why reinforcement area is higher at columns where staircase landing rests ? Please Help !
joining the middle of two columns with a beam will create short columns. These short columns require more reinforcement due to increased stiffness resulted due to decrease is length of column to half. Will static seismic analysis detect those as short column and give the increased reinforcement? or should I do dynamic seismic analysis?
If dynamic analysis is required, which dynamic analysis should i do?- response spectrum or pushover or time history. Or any one of the dynamic analyses will work?
Short columns does require more reinforcement.Column stiffness is related with its cross section ,not length.Adopt response spectrum for dynamic.
สูงหยุดนาย🗝️🗝️🗝️รถ1🌹🌹🌹❤️❤️💖💖💖
how to analyse staircase upload it. And also upload the designing of watertank on etabs 2016
EXCELLENT WORK .BUT WHERE IS THE DESIGNING AND ANALYSIS OF STAIRCASE.Kindly Upload it also so that the tutorial of stair case complete,THnaks
When i draw the stair slab it shows itself in red? Is it ok?
Why the fflight or go become wall?
any way to get ETABS 2016 for lifetime? mine shows 180 days remaining in about section of ETABS!!!
PLZ SHARE DOME SHAPE CREATION VIDEO...
Why dont u use all stories option?
Does the steel requirement and rebar size comes automatically after assining load in etabs?
no, you have to model, assign loads, run, and then design ..
Supeeeeeeeeeer
Structural analysis, SAP 2000, ETabs, and Finite element method
th-cam.com/channels/fZBo0T5G0W_rGYHAXfYIRw.htmlvideos
bro can you explain about stiffness modifier which you taken one of your video and can i consider the same for indian design?
+Viscount Splendidly yes u can consider the same
thanks bro and one more thing in etabs 2016 i am getting base shear of static earthquake zero i checked all data which i used in etabs 9.7.4 everthing all right; is there anything else which i want to do
+Viscount Splendidly make sure u have selected the building levels correctly...must b selected from bottom to top
+Viscount Splendidly it's the same as in version 9...do check whtr u hav missed out something
Why not be given a restraints on the corners stairs sir?
why did you apply dead load after live? won't it calculate its self dead weight,when density is already defined for M25 in material property?
+Md Maqdum it's floor finish load
Sir please help me. Im about on 5th floors but i have miss the scale, could we change the scales like 1:1000 to 1:100 for the exam 1000 m to 100 m. If yes, what should i do. Thank in advance.
okeee
how to mesh the stair ?
Structural analysis, SAP 2000, ETabs, and Finite element method
th-cam.com/channels/fZBo0T5G0W_rGYHAXfYIRw.htmlvideos
I'm confused with load assign. After adding Live Load with option(replace existing load), you added Dead Load with option(replace existing load). Will Dead Load replace Live Load you assigned?
nop
Sir i am unable to offset beam. Why is that so??
sir can you please mail the etabs 2016 download links or can u give the links in description
+mohammed khaja salahuddin go to aportingecivil.com...u will get one
ของ🧑🎓🧑🎓🧑🎓🧑🎓🧑🎓
sir the bottom story is the plinth + foundation then why u have started the stair case from base story
Structural analysis, SAP 2000, ETabs, and Finite element method
th-cam.com/channels/fZBo0T5G0W_rGYHAXfYIRw.htmlvideos
I have one secondary beam which is rested on main beam and another end is rest on column... Please tell me how to design in such case ..that beam is failing again and again even i changed depth to 500 mm still it is failing ...help ...before 30 /4/ 19
Sorry you didn't get help sooner. You only needed to apply a release at the ends of the beam
you forgot to divide the columns carrying the mid landing after replication to connect the landing with the columns
Bro, you have not replicate beams of landing slab and mid landing slab also.
I don't know why this guy is modelling staircase in ETABS