Tamiya: Morris Mini Cooper Part 2
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Links to the products i use are bellow
I Was not paid to say or do anything. These are my honest opinions uncensored.
Want to support this channel, why not become a patron! And also get your chance at winning one of my finished builds:
www.patreon.co...
Visit my webshop(for euopean vieuwers: www.thescalemo...
Or my Amazon Shop for US vieuwers:
www.amazon.com...
My Workbench:
www.hobbyzone.pl/
www.thescalemo...
My airbrushes and setup:
1BAR(20PSI) of air pressure through the gun.
amzn.to/2xGv8JT
amzn.to/2xHccdW
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
amzn.to/2yp5T25
amzn.to/2J8l1n1
The booth i made myself:
• How To: Build a Spray ...
Zero paints store locator:
www.zero-paints...
Grey Primer: www.thescalemo...
Clear: www.thescalemo...
Colors: www.thescalemo...
General Tools: amzn.to/2xGdDOB
Sanding sticks:
amzn.to/2JDydEt
amzn.to/2l1FWOV
Tape:
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
Tape with plastic sheet: amzn.to/2hIy82f
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Cutter: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Clearparts glue: amzn.to/2EQMTyt
CA Gleu: amzn.to/2zb0jhg
Plastic Cement: amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves:amzn.to/2ypuTqd
Tweezer: amzn.to/2hIxj9F
Brushes: amzn.to/2xG77r3
Decals Solutions:
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers: amzn.to/2zptYoa
amzn.to/2z8WREd amzn.to/2zFEgjS
Sanding sponges: amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders: amzn.to/2ypbjtT
Panelline accent color: amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice: amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
Camera Gear:
GoPro: amzn.to/2DDfRgz
Head Strap: amzn.to/2DHiiio
Links
www.thescalemo...
plamoz.com/
www.scalemotor...
/ yellowhouseclub
www.uscp-ua.com
Check out Scaled world and get your builds featured!
scaledworld.net/
/ scaledworld
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds,unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at thescalemodelingchannel@gmail.com
Also don't forget to like us on Facebook for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by TH-cam Audio Library
&
ampletunes.com/
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites
![MORRIS MINI COOPER S 1/24 TAMIYA Model car build [Full version]](http://i.ytimg.com/vi/-ZuEDGtinhU/mqdefault.jpg)
![일상 속 기분 좋음 [Proto disco meme]](http://i.ytimg.com/vi/DwmEIaZ7XGQ/mqdefault.jpg)
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
A special mini with modifications that were available late 1980's, ie deseamed body on 1/4 panels but ordinary dashboard and interior. The engine bay has a couple of bolt on improvements too. Very nice job.
I´m always blown away by your painting skills Tom........... top job
You are so talented and you inspire me to make my models look better.
Nice work as usual. Instrument bezels are always difficult to paint and I can recommend a Molotow Chrome pen which I use for this; it is real chrome paint and looks very good.
Nicely done, will be tuned in to see the final on the Cooper, thanks!...Bill
Awesome engine detail & the interior.
It is amazing how you build models!!
Beautiful build so far.
Outstanding as always - I was fascinated by the flocking, I've not seen that product before and will definitely have to get some. Have you considered using a static grass applicator to apply it? I wonder if that would give you an even more uniform finish, although it came out perfectly in your model anyway :)
Don't think it would make the finish or look any better, as far as i'm aware those just make the fibers stand upright, like grass.
@@TheScalemodelingChannel Well partly, yes - but it also helps uniformity by attracting the fibers across the whole surface. Industrial flocking (such as for pen cases and other things) is generally applied using a static charge.
I'm building this kit myself, and I found some of the parts on the black sprout have some pretty ugly mould lines, the radiator was pretty hard to smoothen out nicely, and the front mudguards don't join as smoothly as I would hope. Did you have the same experience?
It was a bit rough, yes
Tom, a few questions for you
1. Whay wheel chair do you use
2. If you paint some detail by your small brush, how do you prepare it to paint in different color? Do you wash it under running water or use a cup with water or maybe somethting else?
Cheers for you ;)
1. I dont have a wheel chair. I can still walk just fine
2. I use acryl paint thinner and a rag
That sure is a nice little kit.
What is the ‘stick’ you are holding small parts with to airbrush them and how is it attached?
Links in the description. Crocodile clips
Amazing work!
Looking pretty good. Btw just because im curious... Why did you paint the whole engine green?
Cause thats what the originals are like
I love how you flock. My flocking never turns out that good. I don't think the powder I use is fine enough.
That depends. What kind of problem do you find you're having with it? Do you find that it's not laying down evenly, or does it just look too coarse?
@@MFKR696 It just doesn't lay down as well as Tom's does. Not as thick or as even. Maybe my Tamiya clear isn't as thick when I paint it on. I use the same shaker (tea strainer) as Tom.
@@stevehoulihan726 Do you allow your clear time to tack up before application? If not, that could very well be what your problem is.
@@MFKR696 No. Tom didn't in this video either. He sprayed on the clear, wheeled his chair to his other bench where he had flocking waiting, sprinkled it on, shook the excess off. Perfect result.
I think either my powder is too thick or my tea strainer is too fine. I'll keep persevering.
It also helps to have a similar colour to the flocking down before you do it. Which I didn't do on my current project.
@@stevehoulihan726 Whatever floats your boat, man.
Always very great build.
Parabéns pelas montagens,aprendo muito com esses vídeos
Another great video, would you be able to do a lighting tutorial? Really want to Tey that with my next build... A '63 Galaxiey 500
It's not hard to do. There are many youtube videos already out there that describe exactly how to set up a parallel lighting circuit in models. Stay away from series-circuits. They're just like an old, cheap set of christmas lights. If one burns out, they all go out. Then look up how to mechanically join and then solder wires together properly, since "cold-soldered" joins will do you no favors. I know that probably sounds condescending, but it's not intended that way. You'd be surprised how many people just have no clue about how to solder smartly, yet they do it anyways. From all of them, you'd think that simply owning a soldering iron means that you know how to solder, but you cannot buy skills.
But yeah... Point is, there's lots of videos already out there that'll be right up your alley as to getting that idea fleshed out. Don't take my word for it.
Really enjoy your vids. Can you do a series on Brian's eclipse from revell in the future? RIP Paul Walker!
Awesome work man.
I like it, will be watching for next installment
That Exhale track by Jeremy Blake made me fall asleep partway through the video. Not something I'd want to do when watching your videos 😅
Beautiful. I've always use testors and testors model master paint. Are the paints you use better ?
Can’t say
I will say Michael testors is probably the worst paint range on the market it’s like slapping on paste to a model definitely change
@@Simon-sv6qe what brands do you recommend
Michael Brinkley I would recommend Vallejo and zero paints also revell aqua colour
i love all your work... can you do a Tamiya Evo VI...
coming along great!
Is the camera on your chest or your head? Thanks!
Head
Perfect
You should realy buy yourself Orlandoo 1/35 u gonna love it)
Is the entire Zero Paints line a lacquer?
Yes
Bat Girl, lol, love your humor.!!
I dont think the doors are all in leather or whatever. There is a bit of exterior colour too
Neither do i, though with the custom look i'm after, i think its fitting.
@@TheScalemodelingChannel it sure does! It looks amazing in that semi gloss leather colour
Love a good flocking 👍
How did you get That Guy?
Found him on the street
Very nice, will be watching for the next video.k.u.t.g.w. buddy.
I will be happy to have your mini moris çooper 1 24
Hi
Noice
Have you considered making videos without music?
No?