Hooking Your Everlast Power Plasma 82i To Your Langmuir Systems Crossfire Pro
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- This video explains how to hook your Everlast Power Plasma 82i to your Langmuir systems crossfire pro.
Link to were you can purchase an Everlast Power Plasma 82i
www.everlastge...
Link to CNC Torch holder build plans
becksarmory.co...
Link to the soldering station I used to solder these tiny connections
amzn.to/3xkdWKD
For all other Everlast items visit their site with the following link. bit.ly/314Azqt
Follow me on Facebook: / becksarmory
Follow me on Instagram: / becksarmoryllc
Check out official Beck's Armory products: becksarmory.com/
Disclaimer Beck's Armory LLC may receive affiliate compensation from links posted in this video description.
Hey thanks for the Vid i am setting up the same system and cant seem to figure out how to get the CNC connector for 82I apart so i can solder the leads and i dont want to force anything and break it ?
it's threaded. Its strain relief it ratcheted if I remember correctly so if somebody already made it tight you'll have to twist really hard. counterclockwise will make it come apart.
How did you even solder those through that tight opening! I’ve been stuck on this for a week with my 82i and cannot find any answers on a how to
Me too. I was hoping this video actually showed you how. He just described it. 🤷♂️ 🫤
The piece comes apart, the CNC piece. It unscrews if you twist it hard enough at the connectors. I just figured that out so now trying to figure out the right wires.
the "ground" clamp is actually + (positive) on plasma cutters
Thanks.
Clamp is positive on a plasma cuter
Hello Mr. beck
Hope you are still active on here I got a quick one for you.
I have the crossfire pro with the everlast 82i cnc machine torch system. (Sam’s cutter as you)
I opted to NOT purchase langmuirs THC Add on.
Should I just Soder pins on 1 &2 or should I go to 5 & 7. I called everlast they don’t like giving info anything unrelated to operating the machine. Figured I would try here before Langmuir.
Thank you
If you don't have the THC you only need a trigger hook up.
Thank you very much for this video.
I was going to ask you how you hooked it up
That's a very popular questions. I figured the answer needed it's own video. lol
how many pierces do u get out of your consumable's
It's hard to tell because I'm constantly changing sizes. I then put used sets back in. I always make sure I swap them as sets (both electrode and nozzle always stay together) So if I remove the 1.3mm nozzle, and put at 0.9mm nozzle on I also remove the electrode and keep them together as sets.
Excuse the dumb question…. But where is the trigger wire(pin1-2) coming from? Is it coming from the main control panel… or the VIM box… thank you.
the trigger wires come from the Langmuir systems control box.
@@BecksArmory so I have cut the tip off and solder the wires into pin 1&2?
@@mudhaula yeah the plug that hooks to your current trigger input on your existing machine will need to be terminated to pins 1 and 2
Very nice video. I have the Everlast 50s with the CNC Hookup also. I was disappointed with Langmuir when buying the Crossfire Pro I was thinking it would be a CNC Hookup.
Have you seen this th-cam.com/video/FzhiGONOqBY/w-d-xo.html
Seems people have had issue with the raw voltage connections going through the cnc port.
But like in your video, if you are getting the exact same voltage at the cnc port as you are connected to the pigtails you made at the torch lead, then maybe it's not necessary. Or maybe Everlast made changes to their cutters to solve the issue.
Yeah, mine was the same at the lugs and the pins so I'm pretty sure they have updated the board at the factory. When I first got it there was way more talk about this then now. There might still be some of these in the system, but if you buy new now you're prolly in the clear.
Thank you for this video! Can this unit be used to cut thin metal for like decorative signs as well ? Just didn't know if this unit was best for only cutting thick metal?
Yes you can! You can run 0.9mm nozzles. I just cut some 0.030" stainless steel last week with this cutter.
wonder if you dont have the z axis if you need to do the 5-7 pins, or if you can just do the start and stop?
Just start and stop.
What was the issue you were having before you removed the ground prong from you laptop charger?
My THC said zero volts until I broke off the ground prong.
What did you use to solder the pins with? Just a cheap Harbor freight gun?
No I got a really nice kit form Amazon. Here is my video review of it. th-cam.com/video/sflSqbFKTq4/w-d-xo.html
The clamp (work) would be positive and the torch is negative
Thanks
Why did you hook up the trigger when you have a machine Torch and a CNC Cutter?
I hooked the CNC trigger output to the plasma cutter trigger input. This way the CNC controller can fire the plasma cutter when it needs to.
Nice video thanks. Can i use the Machine Torch Mount for CrossFire / CrossFire PRO with the Everlast Power Plasma 82i ? thank s let me know
Yes you can! LS makes a holder and I also have a set of build plans for one on my website.
@@BecksArmory thanks
nice video, do you move the pins in the machine or torch end, I just purchased the same setup, also do you know if you can use the cnc torch has a handheld Incase you want to cut something and not use the cnc table, your help would be greatly appreciated thanks in advance
Yes you can use a hand torch. before I got the everlast I was using a hand torch on my cnc table. hooking this up will not disable your hand torch if you have one of those hooked up instead of a machine torch. The cutter can be triggered by both triggers. It's not a one or the other type of thing. :)
Thanks for the response I have the same setup you have I just soldered the small pins 1, 2 5 and 7 , I know I have 5 and 7 right but for pins 1 and 2 does it matter which one goes to where ? When I cut the connecters off I notice one was black and one was red thanks
@@travisellenberger4914 nope doesn't matter. You're just closing the circuit.
What type is your straight touch you have mounted on your table
it's available on my website. Becksarmory.com
I talked to everlasting day and they said they're coming out with a new Torch in March. he said this one is like a hypotherm & uses hypotherm consumables. he said it is a way better cutting Torch than what comes with that.
sweet! I'll have to get one! Thanks for the heads up.
@@BecksArmory Hello, I just set my 82 eye up yesterday and cuts like a dream. what's the thickest Steel plate you have caught with that? It says it limits out at 5/8. But have you ever tried three quarters?
@@IRONMANMETALBILLDANKANIS Yes I've tried 3/4" You've got to go around 5 IPM with a 3.5 second pierce delay.