Ryno!! I’m a plumber out of Massachusetts and just wanted to share a quick few tips. Those shark bite fittings always turn like that. And the leak you had in your p trap is very common. I personally put a little pipe dope (pipe thread sealant/lubrication on the union part of the trap when I install and they never leak after that. Love the videos! Keep ‘em comin
Im a certified plumber. I will absolutely only ever use shark bites in a pinch till I can get back to fix the problem permanently. The trick to compression angle stops is to use some lubricant on the ferules. And yes shark bites will turn freely, it's normal. One think you should do when using shark bites is to file the end of the copper pipe a little . Copper cutters will bevel the edge making it a little larger. It helps to not wreck the gasket when installing the shark bite.
Nice work Ryno Do your self a favor and get a small back splash for that vanity and silicone that to the top and the wall so you don't have a person staying there that runs water all down the wall behind the vanity everyday making water damage and mold in the drywall
Hey this is what I found on that brake controller; According to my contact at Tekonsha the Sentinel is an older brake controller and the lighting configuration that you have stated seems to be normal. If the green light is flashing at approximately an 8 second interval, it is a diagnostic light that is showing that the trailer is connected and the system is operating. If the red light is illuminated that indicates that there is current to the trailer. If the green light is a solid green light then it is indicating that braking has begun. However, if the green light is quickly flashing at an interval approximately 3 times per second it indicates that there is an issue such as a short or excessive current on the system or low battery on the tow vehicle. I hope that helps.
Loving the constant hard work, as a small YTuber myself i kind of know how much work your putting in behind the scenes when it comes to filming and editing it’s mind blowing. Keep up the great work.
Such a rookie builder. You should use shag carpet in the bathroom. Shag carpet will absoard any water spills in the bathroom. If you miss the toilet while peeing it will all absorb the pee and eliminate unnecessary cleaning .
A better test for the p trap and plumbing under the sink is fill the sink full and let it drain. It puts more pressure on the fittings which will show a leak that might not show with low volume of water.
Beautiful. I’m surprised the guys didn’t do angled edges to combine pieces in the living room. Instead of seeing a straight line down looking in. I usually combine 45 and you won’t see like after caulking. Maybe you might if done that since your into detail. But beautiful overall. I paint everything grey and white hahaha. New neutral color
Hey brother you should also install the cabinet before you install the angle stops that way you're only cutting a small little hole for the pipe then you can put those little collars on and then the angle stops and it'll save you having to cut a bigger hole to fit the angle stops.
Omg LOL that guy that said rounded corners are a luxury where he's at, It is here too, I painted a $7,000,000 mansion by the lake and their walls edges were rounded as well and the owner told me he paid the extra to have it done, Also, I know Ryno is right too because I was born and raised in Cali where smooth walls and sharp edges is luxury... weird how that works lol
Right on Hey Ryan on the base board I've done that Taki job I was 16 bearly . It look cheap. Ahhh yeaa I learn not to do that job. Guest house it turned out wonderful . Ok 👍until video
Did a little plumbing in the past and only recently came across that shark bite style fitting to fix a leaking pipe in my parents house. It’s very unnatural to anyone who has used the traditional fittings. I was surprised that it didn’t leak. Seems I’m not alone. Always appreciate the content. Thank you
Where I live I don't see that kind of dump truck setup where the box on the trailer goes into the truck there is a lot more gravel trains where its usually a dump truck and a dump trailer or a semi pulling 2 dump trailers
Love the videos!!! And a lil trick for sharkbite fitting for when using on copper piping is to take the white plastic out, it's only needed for pex and pvc, and it makes life so much easier
Enjoy your channel RYNO as your channel is all 100% blue collar work and fun. Oh yeah you also like the 7.3 power stroke but why your crew cab is not great at hauling throws me as my 7.3 power stroke is like bulls for hauling!
The shark bites were done properly. The only thing I would have done differently is take the plastic inserts out of the valves. The inserts are for pex, they aren’t needed for copper or cpvc. And yes after installed they will spin and feel loose.
Hey Ryan Jeremy here from Wisconsin. I own my own Drywall business and typically what we use is base adapters with roundbead so you leave a flush surface for your baseboards
Never run a floating floor under cabinets. It’s supposed to float. If you have issues the flooring manufacturer won’t cover it under warranty because that reason. Also supposed to be a .25 inch gap around all walls.
One big advantage to having quarter round corners on the walls and piecing in the angles on the base molding is that you are less likely to break a toe when you hit one with your foot...
The sharkbites should not blow off if the building is still under regulator pressure. They in general practice will split and leak before they will blow off if the pipe is cleaned and properly roughed enough for the sharkbite to attach to.
Need to get the 6.0 fixed up buddy, it'll tow all your stuff you need without overheating. Just studd it and get a livewire tuner. Nice to see a trick to setting up water lines thanks for that. Hope the rest goes well man.
I'm not a plumber I do hvac but have done alot of angle stops in my life being I own rental property. normally with copper u take the white plastic piece out of the angle stop and throw them away there only used with PEX, second the seal is a o-ring and u really are suppose to reem the inside and outside of the copper on the stub outs before u push on the shark-bite fittings.
Another thing is they do make shark-bite fitting that are only for PEX so always make sure u grab the right ones that say copper,pex,pvc and cpvc. And pvc is not acceptable for potable water pipping.
I've used shark bite fitting on a water main coming in to the house to remove a water filter system we never used. Works great and never leaked. I was recommended to do this from an old tile installer my grandma knew
Looks good, question why not shift the cabinet over so that the left corner would be against wall? Seems like that little gap is going to piss you off when items fall
Ryno, the shutoff valve to the guest house is inside the pig pen. Walk through the gate, turn immediately left, should be about four feet along fence. The pig probably covered it up with some dirt. Enjoy!
@@DMAXRYNO doing great! Knocking out some safarris, did a short flight to Zanzibar, didnt realize the India ocean was so beautiful!! Enjoying retirment! I always wanted to put a fence all around the main house!! Keep the critters out!! Ha!!
Ive been using that magnet trick hanging pictures and shelves in our new house. How ever you now have me worried about the bathroom vanity I bought months ago and havent had the time to change out cause I sure did not open the box 🤦♂️
Great job on this series I remodel homes for a living been doing it for 15 years little trick to installing baseboards before paint put 1 1/2 tape down first install base ontop paint wip out the tape paint 2x and cut the tape with a knife and Boom finished
I’ll usually do it with the really thin masking paper in the 8” roll. Slides out nice from under the base once installed. These guys I feel like wouldn’t have wanted that extra step and were already not stoked on me not getting the radiused corners for the base lol.
Every floor guys dream is to hear someone say run a razor blade across the floor lol. That's how some guys have decided to take off ram board on floors we've done. Those guys end up paying for entire new floors lol.
You won't ever see the cut from the razor blade great work by the way wish I lived in Cali I come give you a hand you teach me how to run that escovator lol
My plumber buddy used them shark bites for my propane lines and it’s been 3 years now still not smelling propane so I think your supply lines should be good
I love it, I have done this work in my house and its a pain especially replacing faucets I wish I was able to remove the top to install it lol, Also just ripped up all my carpet to install wood floors.
I gotta say that being able to talk, operate a camera, and do all this work you’re doing it’s talent...of which I have none
I agree mastered the multi tasking. 👍
Its all mindset, ryno gets it. Very inspiring
little tip for peace of mind on the sinks, fill up the sink and drain it a few times to put the P trap under stress to you know it wont leak later.
Ryno!! I’m a plumber out of Massachusetts and just wanted to share a quick few tips. Those shark bite fittings always turn like that. And the leak you had in your p trap is very common. I personally put a little pipe dope (pipe thread sealant/lubrication on the union part of the trap when I install and they never leak after that. Love the videos! Keep ‘em comin
I like the van lights. Much better coverage and ambiance than traditional lighting
The double shock setup was legit 😂 would be sick to see a before and after once complete🤙
Im a certified plumber. I will absolutely only ever use shark bites in a pinch till I can get back to fix the problem permanently. The trick to compression angle stops is to use some lubricant on the ferules. And yes shark bites will turn freely, it's normal. One think you should do when using shark bites is to file the end of the copper pipe a little . Copper cutters will bevel the edge making it a little larger. It helps to not wreck the gasket when installing the shark bite.
Used Sharkbites about 5 years ago, still holding. Like you, couldn’t believe “spinning” fittings would work, but they did
Nice work Ryno Do your self a favor and get a small back splash for that vanity and silicone that to the top and the wall so you don't have a person staying there that runs water all down the wall behind the vanity everyday making water damage and mold in the drywall
Hey this is what I found on that brake controller; According to my contact at Tekonsha the Sentinel is an older brake controller and the lighting configuration that you have stated seems to be normal.
If the green light is flashing at approximately an 8 second interval, it is a diagnostic light that is showing that the trailer is connected and the system is operating. If the red light is illuminated that indicates that there is current to the trailer. If the green light is a solid green light then it is indicating that braking has begun.
However, if the green light is quickly flashing at an interval approximately 3 times per second it indicates that there is an issue such as a short or excessive current on the system or low battery on the tow vehicle.
I hope that helps.
In Michigan we don't get that dump truck set up but we do get the Michigan gravel trains
Nice job Ryno, it's funny how the "little stuff" to finish a remodel can break the bank! Bubbles will love his new pad! 😁
Loving the constant hard work, as a small YTuber myself i kind of know how much work your putting in behind the scenes when it comes to filming and editing it’s mind blowing. Keep up the great work.
Such a rookie builder. You should use shag carpet in the bathroom. Shag carpet will absoard any water spills in the bathroom. If you miss the toilet while peeing it will all absorb the pee and eliminate unnecessary cleaning .
😆😆😆
Background music while you were trenching is fire! It thumps pretty good through the system in my truck
Long travel suspension upgrade for the gravel and hard dirt? That would be bad ass!
A better test for the p trap and plumbing under the sink is fill the sink full and let it drain. It puts more pressure on the fittings which will show a leak that might not show with low volume of water.
Yes finally TH-cam told me you uploaded a video lol uploaded 4 minutes ago and I’m already on it!
Same haha
absolutely loving the vids bro
Muchas gracias chava/papi... sin ustedes no se hace... a Toda madre...
With shark bites you should hear a click when seated ..great vid ...
Man Id be so blessed to have either one of the 7.3 trucks to get me around and do some light work
Beautiful. I’m surprised the guys didn’t do angled edges to combine pieces in the living room. Instead of seeing a straight line down looking in. I usually combine 45 and you won’t see like after caulking. Maybe you might if done that since your into detail. But beautiful overall. I paint everything grey and white hahaha. New neutral color
It’s a great day when I get home to watch a new upload
Hey brother you should also install the cabinet before you install the angle stops that way you're only cutting a small little hole for the pipe then you can put those little collars on and then the angle stops and it'll save you having to cut a bigger hole to fit the angle stops.
Loving these long episodes! It’s better than TV!
Omg LOL that guy that said rounded corners are a luxury where he's at, It is here too, I painted a $7,000,000 mansion by the lake and their walls edges were rounded as well and the owner told me he paid the extra to have it done, Also, I know Ryno is right too because I was born and raised in Cali where smooth walls and sharp edges is luxury... weird how that works lol
Right on
Hey Ryan on the base board I've done that Taki job I was 16 bearly . It look cheap.
Ahhh yeaa I learn not to do that job.
Guest house it turned out wonderful .
Ok 👍until video
Late to this video but that time lapse song is slappin 😂
IDK Why, but I actually Like cutting trim 😄 house looks great now btw
I like any trim other than base lol
Did a little plumbing in the past and only recently came across that shark bite style fitting to fix a leaking pipe in my parents house. It’s very unnatural to anyone who has used the traditional fittings. I was surprised that it didn’t leak. Seems I’m not alone. Always appreciate the content. Thank you
👍👍 always a fun ride.
Love that floor.
Good job plumber boy !
That bathroom is looking pretty sharp !
Where I live I don't see that kind of dump truck setup where the box on the trailer goes into the truck there is a lot more gravel trains where its usually a dump truck and a dump trailer or a semi pulling 2 dump trailers
Love the videos!!! And a lil trick for sharkbite fitting for when using on copper piping is to take the white plastic out, it's only needed for pex and pvc, and it makes life so much easier
I love how fast we get these videos!
I think this floor looks even better than grey. Looks great!
Could always set cabinets where they are going tape around them and cut out floor with multi tool.
I think that’s my plan
Nice plumbing skills bro
Bro for not being a plumber you did Good job with bathroom sink and drains
Coming along!
Daaaang look at Chris showing off the new knee with the moves 🤣🤣🤣
Just looks cleaner
Enjoy your channel RYNO as your channel is all 100% blue collar work and fun. Oh yeah you also like the 7.3 power stroke but why your crew cab is not great at hauling throws me as my 7.3 power stroke is like bulls for hauling!
Nice Job Ryno No Job Is To Big Or To Small You Definitely Get Her Done👍👍
Well done!!
Haha I just bought the exact same toilet for my bathroom remodel
The shark bites were done properly. The only thing I would have done differently is take the plastic inserts out of the valves. The inserts are for pex, they aren’t needed for copper or cpvc. And yes after installed they will spin and feel loose.
Very cool video thanks
Man the guest house is looking amazing it came a long way
Looking good
yessss i called 8 trips to home depot!
Do this to your house that would be a great series
One day! The guest house is already going on 3x what I budgeted for it. I can only imagine how much I’d end up spending on the main house 😬😬😬
Hey Ryan Jeremy here from Wisconsin. I own my own Drywall business and typically what we use is base adapters with roundbead so you leave a flush surface for your baseboards
First love this series
Never run a floating floor under cabinets. It’s supposed to float. If you have issues the flooring manufacturer won’t cover it under warranty because that reason. Also supposed to be a .25 inch gap around all walls.
Still my favorite TH-cam channel 🇺🇸🇺🇸🇺🇸👌🏼😎
I want that hoodie
Yes
One big advantage to having quarter round corners on the walls and piecing in the angles on the base molding is that you are less likely to break a toe when you hit one with your foot...
Install the supply lines to the faucet before gluing the top…. A lot easier to connect to the shut offs than up behind the sink to the faucet
Yes yes yes yes yes
I literally put in the same exact flooring in my house and the same vanity in my 1/2 bath 😂
Keep em coming. Love your subtle political view hints you drop. Keep em coming haha, we all agree!
trim ring is to keep the brown release ring from accidentally unloking
looks great..
Arrowhead sponsoring the “Bottle Shocks”😂
i freaking love shark bites best things ever
That’s the same flooring i used in my house too. I love the color of it. By far my favorite kind
When do you think we'll see more of the single cab OBS ranch truck build and the 6.0?
The sharkbites should not blow off if the building is still under regulator pressure. They in general practice will split and leak before they will blow off if the pipe is cleaned and properly roughed enough for the sharkbite to attach to.
Need to get the 6.0 fixed up buddy, it'll tow all your stuff you need without overheating. Just studd it and get a livewire tuner. Nice to see a trick to setting up water lines thanks for that. Hope the rest goes well man.
I'm not a plumber I do hvac but have done alot of angle stops in my life being I own rental property. normally with copper u take the white plastic piece out of the angle stop and throw them away there only used with PEX, second the seal is a o-ring and u really are suppose to reem the inside and outside of the copper on the stub outs before u push on the shark-bite fittings.
Another thing is they do make shark-bite fitting that are only for PEX so always make sure u grab the right ones that say copper,pex,pvc and cpvc. And pvc is not acceptable for potable water pipping.
Ready to see the final result and what you plan on doing around the fireplace and tv area.
seeing the beginning of this project. it looked back. but oh man. it looks amazing now and its not even done yet ?
Another great video
I've used shark bite fitting on a water main coming in to the house to remove a water filter system we never used. Works great and never leaked. I was recommended to do this from an old tile installer my grandma knew
Looks good, question why not shift the cabinet over so that the left corner would be against wall? Seems like that little gap is going to piss you off when items fall
2:50 ... You better have coughed up that hat. Even I was like WTH that is way more than 50.... Easy Money
I actually need a shock absorber like that right now .
Giveaway?
Ryno, the shutoff valve to the guest house is inside the pig pen. Walk through the gate, turn immediately left, should be about four feet along fence. The pig probably covered it up with some dirt. Enjoy!
Appreciate it! Hope all is well with you guys.
@@DMAXRYNO doing great! Knocking out some safarris, did a short flight to Zanzibar, didnt realize the India ocean was so beautiful!! Enjoying retirment! I always wanted to put a fence all around the main house!! Keep the critters out!! Ha!!
Ii guessed11 trips to Home Depot your getting close.
Keep up the great work
Ive been using that magnet trick hanging pictures and shelves in our new house. How ever you now have me worried about the bathroom vanity I bought months ago and havent had the time to change out cause I sure did not open the box 🤦♂️
I need to come home
Not your home no more bud.
It’s looking really good! You might be the next property brothers, you and Chris! Lol
Thanks for uploading 🔥
Looking great!
That ring on the shark bite is actually the tool the take it off or put it
Great job on this series I remodel homes for a living been doing it for 15 years little trick to installing baseboards before paint put 1 1/2 tape down first install base ontop paint wip out the tape paint 2x and cut the tape with a knife and Boom finished
I’ll usually do it with the really thin masking paper in the 8” roll. Slides out nice from under the base once installed. These guys I feel like wouldn’t have wanted that extra step and were already not stoked on me not getting the radiused corners for the base lol.
Every floor guys dream is to hear someone say run a razor blade across the floor lol. That's how some guys have decided to take off ram board on floors we've done. Those guys end up paying for entire new floors lol.
You won't ever see the cut from the razor blade great work by the way wish I lived in Cali I come give you a hand you teach me how to run that escovator lol
awesome video bro🤙
Your trim ring is also your removal tool
Are the rear brakes on the Grey truck drums? and if they are you should do a disk break conversation
Great job, keep up the good work
🤣lmao, love the h2o shocks!
Your at 7.5 trips so I think my guess of 8.5 will be the winner haha
Once your done with the guest house. You should put in some before and after clips G!
Thank you for posting it g! Great work and it’s made a huge transformation!
My plumber buddy used them shark bites for my propane lines and it’s been 3 years now still not smelling propane so I think your supply lines should be good
I love it, I have done this work in my house and its a pain especially replacing faucets I wish I was able to remove the top to install it lol, Also just ripped up all my carpet to install wood floors.