"how to waste your time to make a tool to kill your drill battery while slowly diging holes in only softest terrain possible (and better pray if you encounter a stone) - the movie"
One thing that I noticed that you may not have. He drilled into already softened dirt. If he were to try to dig into hard dirt that thing wouldn't work so well
look closely, he's digging in a mound of dirt, not the ground. So it's probably very loose to being with. I doubt that thing would make a hole in the actual ground without a lot of work. But good good idea!
5:22. Во первых, рыхлый грунт. Во вторых, какой шуруповётр? перфоратор Bosch GBH 2-26 в отказ уходит, и сбрасывает. Примерно такой девайс сам соорудил на днях. Сантиметров десять, не более. Сухая глина.
For hard ground use a smaller 125mm blade, as the drill will not have enough torque. drill multiple holes in a group to make a big one. It will not work in clay and rocky soil, as the rocks will jam and stall the blade, and the clay will just clog it up and stick to it stopping it from cutting.
The idea is brilliant, however it looked like a freshly dug hole were the mud had been put back.......can it be tested more thoroughly near a tree? see how it handles roots / stones etc
Mark Rowley: The hole looks like it was pre-dug, and then they put the dirt back in the hole to make it seem like the drill auger worked great. Pause right after the job was completed.
I can see the construction problem of the tool, the edge of blade is slicing first, it is not like drill bit do it, wrong construction, doctor DS, please make an upgrade and bend tool that center of blade dig first, then you dont need to rotate drill while digging, it will go down by itself, english is not my language. Evo konstruktivni komentar, ako smijem, treba smotati list pile tako da sredina prva ide u zemlju i reže zemlju, tako će ići u dubinu, ovako sama sebe ukopava, eto tema za drugi video, upgrade, svakako hvala za trud
Блин, а я так же сделал. Потом пошёл Ютуб смотреть, как другие делают, и да многие говорят зубьями в обратную сторону надо делать 😕 В выходные доделаю свой бур и проверю как работает.
Looks good until you try that in my yard. You might get about a foot before you hit the shale, clay, and boulders. Cool ideal for good soil. I think so would have had my hole dug with my post hole digger in the time it too to make this though.
Geo Matrix 1 second ago I just used this method to drill a 7" x 48" inch deep hole to install a 14 ft pole for security cameras. It works great! If you're concerned about cutting your leg you probably don't need to be using ANY type of power tools to begin with...
it works on the ground you already dug before filming. but about real ground with roots and rocks in? you snap your wrist and break your drill. even petrol powered augers struggle with rocks.
That was great. Now, make one up that can bore down through at least 8 feet, with 12 feet being better, of heavy creek mud riddled with old broken tree limbs, pieces of broken concrete and plenty of other detritus from over 150 plus years of history including commercial tug and barge operations, warves and a Civil War encampment area with fortified artillery batteries and possibly a graveyard, so I can set new pilings for an existing pier? Can I expect to see it by Tuesday? Thanks, in advance... (Just kidding, but just this morning I was thinking of a way to do something similar to yours to expedite my project. You've helped my thought process, so thanks! )
*Одна ошибка, диск нужно приварить зубьями в обратную сторону, чтобы не захватывали камни и не рубили их, а то возможен раскол диска. (One mistake, disk it is necessary to weld teeths in the opposite direction that didn't take stones and didn't cut them, and that split of a disk is possible.)*
Pause the video right after he completes the digger. You will see that the hole has already been dug before. You can see the outline where the saw blade started. Now I don't know if I want to make one.
ЗАДУМКА КОНЕЧНО НЕ ПЛОХАЯ ДЛЯ РЫХЛОГО ГРУНТА. А ВОТ КАК ОНА БУДЕТ ВЕСТИ СЕБЯ В ТВЁРДОМ ГРУНТЕ. И В ЗЕМЛЮ ДОЛЖЕН ИДТИ НЕ ОСТРЫЙ ЗУБ, А ЛЕПЕСТКИ ТИПА РЫБЬЕГО ХВОСТА ЗАГНУТЫЕ В ПРОТИВОПОЛОЖНЫЕ СТОРОНЫ, НУ И КОНЕЧНО ЖЕ ЗАТОЧЕННЫЕ. ПРОВЕРЕННО НЕОДНОКРАТНО, И РАБОТАЕТ.
It takes two hours to go a foot and a half in the ground where I’m at In SA Texas. I’m at using a jackhammer two hours per hole on average for post holes.
The soil looked pre-dug. I've used petrol purpose built motor and augers many times. And they don't even dig nice like that, especially if you hit rock!
lol I love the show and how he shows people how to do neat inexpensive tricks with things they might already have. but this does seem too simple to work. and that hole was definitely already pre-dug lmao. I'm betting you will need s smaller blade or a larger tool that's more ergonomic and used with both hands.
Это я один заметил то что испытания проходили на предварительно выкопаной и засыпаной обратно ямке? Если пилу взять меньшего диаметра, а вместо шуруповёрта взять перфоратор помощнее...то для копки ямок под столбики забора вполне хороший девайс.
прикольная хрень для мягких грунтов..... у меня суглинок через пол метра чернозема, это туда не залезет из-за отсутствия бура на конце. Ямки в походе для толчка делать пойдет))))
Good for planting many holes... Lakse je kada prvo zavarais osovinu pa tek onda pocnes sa secenjem. Takodje nisi trebao preseci potpuno testeru nego se zaustaviti na 1cm od rupe i tek onda kriviti lamelu Sve u svemu dobar posao !
It's actually dangerous. I've watched some documentary video about those rotating blades grass trimmers and sometimes a blade hits a rock on the ground just to detach and fly to breach the operator's skull.
I do believe you can buy one of those in various sizes for not too much money. I have seen the smaller ones (2-3" size) in home garden centers and they come in handy for planting bulbs, especially if you have many holes to make. I suspect that size would work well for potted plants.
This guy must get through dozens of power cables on his angle grinder. I am also impressed with how he checks the sharpness of the edge he just ground with his hand.
Why so much grief on this. It is a great idea for a lot of different applications. I do agree that there are certain places it won't work. Ohio as well. I'm 60 years old and can still hit 30 inches with basic post hole diggers in 20 min. Though most of the time you are using Spud bar a couple times per hole. I doubt Ohio clay would just fall off even when spinning. Gardeners, and some hardscape contractors would love it.
Brilliant tool to plant weed out in the wild then mix up the soil with slow release feed and water them in they do this for pine trees then jest stake them when ther planting them in weed or young trees will love the fresh tiller soil I think a weed Wacker moter would work well if adapted the type with a clutch in case you hit rock
Option A: Buy a $35 saw blade and $1000 in tools. Spend all day making a tool so you can then go dig holes tomorrow. Option B: Rent a hole digger from Home Depot for $60 and be finished the same afternoon.
Uma ótima ideia para quem quer reaproveitar materiais.😊 Uma dica é usar um martelete no lugar de uma parafusadeira. Principalmente se for usar o disco do vídeo. E se colocar mais uma redução fica ainda melhor.🤗
Looks like the hole was already dug out at 5:22 and filled back in so you could use this tool to remove dirt with ease.
Maybe its a tilled garden, this would be great for transplanting tomato, peppers, squash. Any plant with a large root ball.
Great video. Congrats from Argentina
@5:21 you can clearly see that the hole had been pre-dug and then filled in again. In other words, he faked it.
"how to waste your time to make a tool to kill your drill battery while slowly diging holes in only softest terrain possible (and better pray if you encounter a stone) - the movie"
That was predug soil, so it was really soft for the auger to work. Near the bottom was firmer soil that's why it kept jumping around.
Clever. I like ideas that don't benefit the big companies.
Ignore the jealous comments.
One thing that I noticed that you may not have. He drilled into already softened dirt. If he were to try to dig into hard dirt that thing wouldn't work so well
Зубья пильного диска нужно развернуть в другую сторону, чтобы не цеплялось за корни. И снизу кусок сверла приварить по дереву на 40 мм
look closely, he's digging in a mound of dirt, not the ground. So it's probably very loose to being with. I doubt that thing would make a hole in the actual ground without a lot of work. But good good idea!
fc3sbob TH-cam detective??
5:22. Во первых, рыхлый грунт. Во вторых, какой шуруповётр? перфоратор Bosch GBH 2-26 в отказ уходит, и сбрасывает. Примерно такой девайс сам соорудил на днях. Сантиметров десять, не более. Сухая глина.
Cool. Its handy to have a tool like that if you want to dig a hole in a pile of planting soil you just dropped
Great idea, successful execution, but the "like" goes to the Jack Daniels t-shirt... 👌
Great idea for POROUS SOIL. I doubt it’s going to work well or at all in CLAY or HARDPAN
looks like the ground was dug up already then put back in
Ya noticed that two.
seen a bunch of people make this comment .. it's good dirt.. maybe it's already an established garden bed ?
AH NO I can see the circle outline before he starts to dig.
click bait, all liessssss
I’ve been doing this for a couple of years now using a 4 1/2 inch blade to plant flowers and bulbs with. It’s fast and effective for landscaping.
you digged previous in the ground, that is the reason why the soil is soft i recommend you keep using the tool that you used at first, a shovel
Dug
A great idea...all environment lovers should popularise this idea and encourage young people to plant trees to make their city, roads beautiful..
То бюро Ъ до г
Yes nice soft ground, try it on hard ground.
For hard ground use a smaller 125mm blade, as the drill will not have enough torque. drill multiple holes in a group to make a big one. It will not work in clay and rocky soil, as the rocks will jam and stall the blade, and the clay will just clog it up and stick to it stopping it from cutting.
The idea is brilliant, however it looked like a freshly dug hole were the mud had been put back.......can it be tested more thoroughly near a tree? see how it handles roots / stones etc
Mark Rowley: The hole looks like it was pre-dug, and then they put the dirt back in the hole to make it seem like the drill auger worked great. Pause right after the job was completed.
я себе такой же сделал...так мне приходилось поддерживать бур вверх..бур сам уходит в землю...мелкие корни очень хорошо берёт...
Oo
I can see the construction problem of the tool, the edge of blade is slicing first, it is not like drill bit do it, wrong construction, doctor DS, please make an upgrade and bend tool that center of blade dig first, then you dont need to rotate drill while digging, it will go down by itself, english is not my language. Evo konstruktivni komentar, ako smijem, treba smotati list pile tako da sredina prva ide u zemlju i reže zemlju, tako će ići u dubinu, ovako sama sebe ukopava, eto tema za drugi video, upgrade, svakako hvala za trud
Необходимо сделать так,чтобы зубья диска были направлены в другую сторону.Не будут цепляться за корни и создавать лишнего сопротивления при бурении.
Блин, а я так же сделал. Потом пошёл Ютуб смотреть, как другие делают, и да многие говорят зубьями в обратную сторону надо делать 😕
В выходные доделаю свой бур и проверю как работает.
8nhung.bai.hat.truoc.nam.1975
Great video! I wonder if they can be used to make irrigation ditches.
Looks good until you try that in my yard. You might get about a foot before you hit the shale, clay, and boulders. Cool ideal for good soil. I think so would have had my hole dug with my post hole digger in the time it too to make this though.
Basshead Thats what I was thinking would have happened in my yard too. Clay and rocks.
Its 2-in-1 = double beneficial
Drilling+ also use to pulling out mud
Great 👍
Thanks
That was some soft ass dirt I want to see you do that in some hard dirt like Vegas desert
Geo Matrix
1 second ago
I just used this method to drill a 7" x 48" inch deep hole to install a 14 ft pole for security cameras. It works great! If you're concerned about cutting your leg you probably don't need to be using ANY type of power tools to begin with...
Love your choice in music. 🤘🏼
The soil looked loose to begin with? But, good job. I can weld and fab some, but looks a little dangerous, lol.
*Cut all theeth with grinder & weld a long piece of metal as bucket..*
it works on the ground you already dug before filming. but about real ground with roots and rocks in? you snap your wrist and break your drill. even petrol powered augers struggle with rocks.
Exacto amigo, en terreno no trabajado la herramienta ha de tener la forma de un sacacorchos
That's bloody clever mate.
An A for ingenuity but definitely not the go-to for post holes.
Good idea Doctor! I need a tool that 😉👍
That was great. Now, make one up that can bore down through at least 8 feet, with 12 feet being better, of heavy creek mud riddled with old broken tree limbs, pieces of broken concrete and plenty of other detritus from over 150 plus years of history including commercial tug and barge operations, warves and a Civil War encampment area with fortified artillery batteries and possibly a graveyard, so I can set new pilings for an existing pier? Can I expect to see it by Tuesday? Thanks, in advance...
(Just kidding, but just this morning I was thinking of a way to do something similar to yours to expedite my project. You've helped my thought process, so thanks! )
The best drill ever made! Awesome ingenuity man..
Please tell me you're sarcastic
Jaap Hoogendijk That's my personal opinion of course. I have had great luck with all Makita tools. DeWalt is my 2nd favorite tools.
Excuse me I thought you were talking about the tool made in the video. I agree with you on the drill.
Jaap Hoogendijk I was mostly talking about the drill. I'd say this guy probably saw a video on this same idea for the tool.
It doesn't work, so it easily hangs on roots and rocks in the ground.
Maybe it works without the teeth.
Somebody noticed the hole was pre dug then filled back in. I watched it again and yes it was pre dug!
Cool idea! I used a Dewalt 12" blade to make a disk brake on a mini bike me and my son built. They are tough and work well.
Billy; the teeth will also serve as parking brake.
Can only be used for soft soil not stony
5:22 pre-drilled hole.
Yoooo i just can't help but smirk how cool this is!! XD
Stop hating on this tool. It's a genius idea if there are no rocks, roots and if the ground is already loosened up 😅
I might try this one. Just a suggestion get rid of the royalty free music loop
I could've dug that out faster with my bare hands in that pre dug soil...film again in compacted untouched soil...
ááááááw1q
Nice work bro.keep it up
It's a good start, now weld 3-4 of them together spiralling up and you have an auger.
I could have been done with the work by the time you got done building this 😂😂😂
Worst thing you can say to us is, "don't try this at home" my cutoff blade cut right thru that old sawblade of mine..
Very good idea, thanks for posting. 👍👍👍
Great for spiral slicing your leg into a holiday ham! Actually, I would try it, in soft soil.
*Одна ошибка, диск нужно приварить зубьями в обратную сторону, чтобы не захватывали камни и не рубили их, а то возможен раскол диска. (One mistake, disk it is necessary to weld teeths in the opposite direction that didn't take stones and didn't cut them, and that split of a disk is possible.)*
Их лучше вообще убрать
Great, and if you dont want to get injured, use an auger.
Lol
DUUUUDDDE! I knew it was simple,you nailed it.
Pause the video right after he completes the digger. You will see that the hole has already been dug before. You can see the outline where the saw blade started. Now I don't know if I want to make one.
nice auger DIY..good job my friend
That hole looked dug and back filled to make the trinket look functional.
Fi,m x
Good for planting shrubs and young trees etc But can't these be bought? I don't have all those tools to make one.
It would be worth a try with an electric drill. I could see problems with roots and rocks though.
I didn't think it would work very well, but I am wrong. Great job!!
Earth was already dug out . 5% engineering the drill wobble and shale
Augers are an spiral screw ,sadly the concept hasn't caught on ,great drill killer ,even struggling in lose dirt
ЗАДУМКА КОНЕЧНО НЕ ПЛОХАЯ ДЛЯ РЫХЛОГО ГРУНТА. А ВОТ КАК ОНА БУДЕТ ВЕСТИ СЕБЯ В ТВЁРДОМ ГРУНТЕ. И В ЗЕМЛЮ ДОЛЖЕН ИДТИ НЕ ОСТРЫЙ ЗУБ, А ЛЕПЕСТКИ ТИПА РЫБЬЕГО ХВОСТА ЗАГНУТЫЕ В ПРОТИВОПОЛОЖНЫЕ СТОРОНЫ, НУ И КОНЕЧНО ЖЕ ЗАТОЧЕННЫЕ. ПРОВЕРЕННО НЕОДНОКРАТНО, И РАБОТАЕТ.
It takes two hours to go a foot and a half in the ground where I’m at In SA Texas. I’m at using a jackhammer two hours per hole on average for post holes.
Mentira tiempo 5:22 se mira que el agujero estaba previamente hecho.
The soil looked pre-dug. I've used petrol purpose built motor and augers many times. And they don't even dig nice like that, especially if you hit rock!
Looks like he's cleaning out a hole that was previously dug?
Very nice thank you bro 👍💚💜💛🌸🌸🌸🌸🌸🌸🌸
I wish I had soil like yours.
no u dont with out some rocks your post would eventually become loose trust and come out me i know lol :(
Not bad for diy. It's a pancake auger bit. Usually they have a lot more turns than just want, but if it works good enough for you then great.
PL Ä PL Limo ĺ
sure looks to me that the dirt area he used was dug already then filled back in , just sayin
lol I love the show and how he shows people how to do neat inexpensive tricks with things they might already have. but this does seem too simple to work. and that hole was definitely already pre-dug lmao. I'm betting you will need s smaller blade or a larger tool that's more ergonomic and used with both hands.
крутая штука... я себе такую же построил...только вместо шуруповёрта миксер использую...
Now try it in dirt that has not been dug up already
your soil is so loose and good it's like sand, but try this in muddy soil, won't work as seen in video
Very good manuval Idea god bless you
Это я один заметил то что испытания проходили на предварительно выкопаной и засыпаной обратно ямке? Если пилу взять меньшего диаметра, а вместо шуруповёрта взять перфоратор помощнее...то для копки ямок под столбики забора вполне хороший девайс.
Yri Grushko Я миксером бурил, в лерла мерлен бур на миксер рубликов 300))) и диск портить не нужно)))
прикольная хрень для мягких грунтов..... у меня суглинок через пол метра чернозема, это туда не залезет из-за отсутствия бура на конце. Ямки в походе для толчка делать пойдет))))
Good for planting...
Specially when you are digging many holes at a time..
It would be helpful..
You prepared that hole before you started.. we are not stupid man.. but good job... you need a stronger engine
He need sono an hospital
Are you related to Sherlock Holmes?
It works on pre digged dirt only ? 😂😂😂
Pre-dug hole 5:21 nice try though
Good for planting many holes...
Lakse je kada prvo zavarais osovinu pa tek onda pocnes sa secenjem.
Takodje nisi trebao preseci potpuno testeru nego se zaustaviti na 1cm od rupe i tek onda kriviti lamelu
Sve u svemu dobar posao !
Great idea ,I’m going to make one,👍
It's actually dangerous. I've watched some documentary video about those rotating blades grass trimmers and sometimes a blade hits a rock on the ground just to detach and fly to breach the operator's skull.
5:21 seguro que el pozo no estaba hecho??? 😂😂😂salud don fraude!🍻
Isn't this just an auger?
I do believe you can buy one of those in various sizes for not too much money. I have seen the smaller ones (2-3" size) in home garden centers and they come in handy for planting bulbs, especially if you have many holes to make. I suspect that size would work well for potted plants.
Try it on a hole that hasn’t been dugout yet?
This guy must get through dozens of power cables on his angle grinder.
I am also impressed with how he checks the sharpness of the edge he just ground with his hand.
Why so much grief on this. It is a great idea for a lot of different applications. I do agree that there are certain places it won't work. Ohio as well. I'm 60 years old and can still hit 30 inches with basic post hole diggers in 20 min. Though most of the time you are using Spud bar a couple times per hole. I doubt Ohio clay would just fall off even when spinning. Gardeners, and some hardscape contractors would love it.
I'm thinking VERY good for planting trees in softer soil!
Brilliant tool to plant weed out in the wild then mix up the soil with slow release feed and water them in they do this for pine trees then jest stake them when ther planting them in weed or young trees will love the fresh tiller soil I think a weed Wacker moter would work well if adapted the type with a clutch in case you hit rock
I guess I'll just have to make one to convince my neighbors that they have badgers in their garden.
I can think of worse ways to spend a day.
Will build one on my channel too. Awesome
Option A: Buy a $35 saw blade and $1000 in tools. Spend all day making a tool so you can then go dig holes tomorrow. Option B: Rent a hole digger from Home Depot for $60 and be finished the same afternoon.
Perfect for placing land mines in the zombie apocalypse
Uma ótima ideia para quem quer reaproveitar materiais.😊
Uma dica é usar um martelete no lugar de uma parafusadeira.
Principalmente se for usar o disco do vídeo.
E se colocar mais uma redução fica ainda melhor.🤗
Would like to see it work against clay under the dirt
Hey great idea goin to try see what happins Thanks for sharin your project with us
While drilling, praying/hoping for not hitting rock or tree root.
Now imagine hitting a sprinkler line or a buried electrical line
now, that's just being lazy. also, can I borrow it? :-)
Thankyou😘 I already made it, and help me to gardening😍😍
Tnx
Brilliant tool, and the toolmaker made it look so simple to make. I am looking forward to replication of this.
😡😈