How to make alarm from old mobile phone EASY !
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2017
- Hello my friends in this video i show you how to make alarm from your old mobile phone. I think everyone of us have old mobile phone with keyboard :) if it can't find in your home you can ask yours friends.You can protect your house or other building or you can leave in your car. In this way you can protect where are you go you will receive call if sensor detect movement and presence from humans and animals. Mobile phone make call when sensor detect movement and presence, so therefore we connect one wire from call button to positive wire from battery and another to signal from sensor.
When it receive call button signal from sensor will make short contact and than will dial the number we set for calling :) I make this video step by step to make everyone, you need a little knowledge from electronics and you will make your alarm.
Another important thing that is you need PIR motion sensor. To activate call button when detect movement and presence.
More about PIR(Pyroelectric infrared) Motion Sensor
The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. The module has an on-board pyroelectric sensor, conditioning circuitry and a domb shaped Fresnel lens.
A (PIR sensor) is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.
All objects with a temperature above absolute zero emit heat energy in the form of radiation. Usually this radiation isn't visible to the human eye because it radiates at infrared wavelengths, but it can be detected by electronic devices designed for such a purpose.
The term passive in this instance refers to the fact that PIR devices do not generate or radiate energy for detection purposes. They work entirely by detecting infrared radiation emitted by or reflected from objects. They do not detect or measure "heat".
An individual PIR sensor detects changes in the amount of infrared radiation impinging upon it, which varies depending on the temperature and surface characteristics of the objects in front of the sensor. When an object, such as a human, passes in front of the background, such as a wall, the temperature at that point in the sensor's field of view will rise from room temperature to body temperature, and then back again. The sensor converts the resulting change in the incoming infrared radiation into a change in the output voltage, and this triggers the detection. Objects of similar temperature but different surface characteristics may also have a different infrared emission pattern, and thus moving them with respect to the background may trigger the detector as well.
My channel :
/ simplehacker
My blog:
simplehacker1.blogspot.mk/
Google+
plus.google.com/u/0/102999417...
Materials that you need:
1. Old mobile phone with keyboard
2. Two wires with 20 cm length
3. PIR (Pyroelectric infrared) Motion Sensor(working voltage 5-20)(You can get here on amazon for 2 $ US)
www.amazon.com/TOMTOP-Pyroele...
218&keywords=pir+motion+sensor
4. Connector with 3 pins i use from old pc cpu fan
5. Battery 9 volts
6. Battery connector for 9 volts
7. Plastic Box
8. Switch
Tools that you need:
1. Pliers
2. Sealing tape
3. Screws
4. Soldering iron
5. Glue
Eternal Hope by Kevin MacLeod is licensed under a Creative Commons Attribution license
(creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/ - วิทยาศาสตร์และเทคโนโลยี
![[TH] 2024 PMSL SEA W2D1 | Summer | ถ้าไม่พร้อมลุย ได้ไปคุยกับรากมะม่วง](http://i.ytimg.com/vi/XlkKtVvBxac/mqdefault.jpg)
not going to lie i didnt realize what your phone was for untill the end but its a really smart idea now while you out you can get a call if someone break in thats so smart thats big brain
A very simple and nice project with step by step procedure. Wonderful brother. Hope to see more DIY projects from your end. God bless you!
Thank you bro. I promise i prepare other useful projects and videos.
@@SimpleHacker Brother, why does it not work if I follow your example! I watched your video dozens of times, it should be right!
Ton invention est la meilleur dans la categorie " alarme fait maison "
Your invention is the best in the "homemade alarm" category
Тhank you my friend, i prepare more interesting and useful videos
Thank u sir I made my PIR gadget thnq so much for quick response n guidance..
Nice I'm glad to hear that he did a successful project. Don't worry i'm here at every time :)
Indian Gamer
Yes ,working smooth
1000 thumbs up for this idea/solution!
Thank you my friend :)
mag gyver in electronic an more .. more please . greetsings from croatia
Thanks my friend i'm glad that you like it, it will be more i prepared more good and useful videos :)
Ovakvih nam ljudi treba :D
You did very nicely.great idea thank you so much for making a helpful vedio it's really very helpful for me thank you so much Sir.
YOU'r genius nice work dude . from algeria
Thanks my friend, Greetings to the Algeria :)
EHD®DR DFBydsj
thanks for description
No problem you welcome :)
Vera level ji
Good project . can a car 12v battery be used in place of the 9v ? . Also Was the switch used to on/off the pir or the phone ?
super. thank you!
You welcome :)
VERY NICE & SIMPLE WORK. WELL DONE
Thanks my friend i'm glad that you like it :)
Shoba Sheeba XXy
Great idea ! 😎🙄
Thank you i'm glad that you like it :)
Saludos desde México buen video
thank you for sharing it
Thank you to my friend :)
Hi sir, Your project is awesome, May I know can we use a mobile charger to give power for PIR, Instead of 9v battery?
Good work!
Thanks my friend.
Very good video and easy to make thank you
Thanks my friend i'm happy when others liked my projects, i prepare very interesting and useful videos i hope you will enjoy :)
great job buddy👍
Thanks my friend :)
Nice
Thanks :)
Very good
Thanks for this!! It has really helped research students like me. If you could give me and my group mates more tips that would be really helpful!!, we are conducting a study entitled; Making a fire alarm out of old phones (We will be crediting you :) and put this on our references)
The Idea is to signal the smoke detector to the old phone then the old phones receives the signal and passes it onto the user.
also what kind of old phone are you using?
You have nice idea also ,you can use any old cell phone if have possibility to make auto call. :)
@@SimpleHacker Brother, why does it not work if I follow your example! I watched your video dozens of times, it should be right!
Fantastic invention Bro, i want to make a similar alarm but with One difference, magnetic sensors for Doors and Windows what do you think? It's possibile?
Yes it's possible only you need output voltage impulse
Sir kitne distance per kaam karega kitni during tak cover kar sakta hai
hi great video! i just want to ask a question, can i replace the motion sensor with some other sensor? gas sensor for example? thank you
Yes you can experiment with many sensors :)
@@SimpleHacker sir je wale project mein koi resistance ja transistor ki koi jarurat to nahi?
thanks i have made one and made a diy powerbank for the phone
I am glad to hear this , thank you too my friend :)
@@SimpleHacker Dude,Is 9V battery good for it?
Yes of course my friend :)
Nice one 👍👍👍👍
Is there any requirement of any resistance and transister in this project?
Can you tell me please how long will sensor from your video/project work on 9V battery you use?
I want to do same and place it in my garage(minimal movement detection).
Thank you !
About 6-7 months
Arduino HC-SR501 according to specification have power consumption 50ua, so it's about 2 days on 9v battery.But I'll try first with battery.
Very nice project
Thank you my friend :)
Nice idia
Very very good idea
Thank you Sir :)
nice thumb up!!!
Thanks :)
Nice idea.
Thank you :)
thank you for make this .. need power charge to phone....
Amazing
Thank you :)
молодец!!!
Спасибо ! :)
Good job
Thanks my friend
Nice project bro
Thank you bro :)
Welcome
Nice vedio
Hello Sir
Its A Nice Basic Project For Student,
Thanks To You For Sharing With Us,
I Have 2Q For You
1:Q. Can I Use Flame Sensor For Triggering
I Hope You Will Replay This Question
2:Q. How Many Days Can Run This Project With 9V Battry.
1. Yes of course you can use any sensor you want with low voltage output 3 volts, 5 volts or 8 volts.
2. How many days you can run that is depending how much will be used or active sensor. Lets say alarm will activate one's in day so you can use 60 days. But i will suggest if you dont want replace batter you can use adapter with 8-9 volts output.
Thanks Again 🤗 Stay Safe #
Thank you take care too.
@@SimpleHacker does 12v adaptor support this....
Sir ji ekdam zakas. Par isame Jo mobile connect karate hai usaka display off kyo nahi hota hai.
Maine ise use Kiya bahut aacha laga.par display on hi raheta hai.
Iska koi solution Bata dijiye plz.
nyc video
Thanks my friend :)
We hope you can also invent a motion sensor with cctv camera sir!!!
It's very nice bro , but how to make a pocket amlifier help of waste or old walki talki at home bro and also . It's bro i realy like it bro i just loved it bro
Thank you my bro, if you want to use your old walki talkie you need one pair of them i mean two talkies . So the one of them will connect to the motion sensor and on the other one will receive signal. You will connect motion sensor and solder wires to the SOS button on talkie which will send SOS signal to the other talkie and you will hear the horn or SOS signal when someone move in distance.
Questions please answer
When the wires are connected to the button does it mean once the wire ends touch it's calls the other phone??
Is there a way to stop it from calling you multiple times if it keeps sensing constant movement? Or would it just be best to block the number until you get to it to cut it off?
Phone will calling during PIR sensor detect movement or human presence. So the best way is to reject call. However you will know if there any human presence or movement just you need to reject call.
can we use a piezoelectric sensor as a substitute for the PIR?
Yes of course, you can experiment with other sensors
@@SimpleHacker hi can i ask if i could use other phones? if so, what brands/model can u recommend?
Sir I like your product
It will call if mobile screen will turn off
Please tell me
Yes my friend, try to hold old phone on call button it will call the only number that is called before. But remember to turn off all security on that phone. :)
Supper
Gran video pero no entiendo mucho ya q no hablo ingles
Good
Thank you my friend :)
Can you tell me the name of the back ground music which you used for this video..
I think it is Ethernal Hope.. pls check at the and of description.
Bro i have a doubt...will it work for a buzzer instead of the mobile phone??instead of the two wires from the call key can i connect two wires from the buzzer??
Yes of course my friend i have also project same like you search for, connected to a buzzer directly. Pls check this link:
th-cam.com/video/kG57JD3hWuA/w-d-xo.html
👍👍👍👍👍👍
Good morning, sir,
Ok, you put in a prepaid card; but how do you configure the phone so that a nearby presence triggers the alarm and dials the number on your smartphone?
Sensor motion send signal in (volts) on call button so i solder negative and positive wire on call button. So when happen
short circuit call button make call on last recent called contact. So you need first to make call to your phone or on that phone where you want receive alert call.
thanks
You welcome :)
How far can you be with the phone for it to work
Super video . Makedonc si ?
Da da :)
hi friend ..i tried to solder the two cables like you but it is impossible ..the solder want stick on the little piece so my uestion how did you do that and what did you use for solder..thanks
Yes i know you need precisely soldering iron , also when solder precisely things you need to solder with lower temperature, so the tin will not spill.
thank you my friend for your help
Hey how do you set the outgoing call
is it possible to use same mobile battery for sensor also?
No my friend it is not possible because mobile battery voltage is 3.5 or 3.8 volts and on PIR sensor Working voltage range is : DC 5V-20V.
Wow
very good
Thank you :)
Can a call be make ,if I connect both wires of mobile with battery?
super
Thanks :)
hi! can i also do this with a pressure pad instead of a PIR sensor?
Yes you can try that is also nice idea :)
@@SimpleHacker thank you so much for replying! Wish you the best with your channel 😊💖
Thank you Antonette :)
Does it need this sort of mobile only or can make it with other sort like nokia or samsoung ?
Yes you can make with other brands like nokia or samsung. Just you need old phone with buttons sure you can find in your house or ask some friend :).
Ok , thanks :)
No problem , Welcome :)
Simple Hacker excuse me can i ask you one question , why u use battery?
the best one nice bro
Thanks my friend i prepare more good videos :)
Nise
Thanks :)
For permanently setting it we need to attach a charger to the phone too right??
It will not reset settings if battery drop and you charge again. Also your phone always can be connect on charger.
what phone model are you using? thankyou
I use Alkatel, but there also many old phones with auto call function.
well thank.
Don't try to go through airport security with this :D
:)
lulz
What meaning your commenttl
It is safe hai kya .................. Bluetooth control........?
Can the mobile pickup and attend the phone call...?
Can we do this in any keypad phone?
Yes of course and with possibility to make autocall.
hi i'm a phone collector
SUPER
Thanks :)
Your idea is very good. You can also use speeddial option
Hmm yeap that is second option :). Thanks my friend
I want ti thank you. Before getting your i was going to buy an arduino. But now i'll use your idea.
There different options but this is very simple and not so expensive , i'm glad that you use my project. :)
How much time it will take to discharge 9v battery??
I it best😎😎😎
Thank you :)
Does for kids calling
bro pls tell me that it will work on speed dial or not
Yes it will work on speed dial, but remember you need phone when you press on number where you want to send call to make auto call not to show contact.
I will do
Yes you can good luck my friend :)
Brother how many volt batteries have you used here?
Only 9 volts batteries for PIR sensor
hi friend tell what can we as the substute of phone
Really i don't understand what you mean exactly ...
can we do the phone like sms to the user's phone instead of calling?
That is also nice idea my friend but i think it will be difficult to realize that because you need cell phone with key button with instant send msg to some number which you must assigned on that button and also you need prepare some sending text in msg. But in that way i don't recommend it because it will charge you for sending msg :), so with calling is free just with rejecting call.
yes ,and we need like item to send text msg just like a robot,anyway thanks for replying.Im just wondering
Sir this is not working to me the i did not get any call pls the Circuit diagram pls it is very helpful to me
Me gusto
Gracias mi amigo :)
Can v make it with 5 channel relay?
Yes you can
Can I increase the meter of sensitivity
1. There two trigger mode: (can be selected by jumpers) a, can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically become low from high; b, repeatable trigger: the sensor output high after the delay period, if the human body in its sensing range activities, its output will remain high until after the delay will be left high to low (sensor module review Measured activities of each body will be automatically extended after a delay time, and the final event of the delay time Starting point of time).
2. Distance the potentiometer clockwise to adjust the distance, sensing range increases (about 7 meters), on the contrary, sensing range decreases (about 3 meters).Delay adjustment potentiometer clockwise rotation, sensor delay longer (about 300S), the other hand, induction by the short delay (about 5S).
Nice video... But will it work????
Yes try it you will see :)
Need somebody help. Does the old mobile phone have to be an active phone, I means this old mobile phone is a working phone under a phone company that has an active sim card? thanks
Yes sure my friend you need active sim card to make calls.
pls tell me one ans this mobile how to know that this alarm call send to you
PIR Motion sensor know, when detect human presence and moving send output signal so you will solder that wire with output signal and other positive wire to the call button on cell phone. That is the method for mobile cell phone. Watch video my friend you will see it is not hard to learn how to make yourself.
Check this video th-cam.com/video/kG57JD3hWuA/w-d-xo.html
Sir even if im away far from home my phone will still alarm?
Are you sure all wire connections you solder them correctly?
Can you us old cell phone D active but got internet connection
You mean over internet to send signal that is good idea but it is not possible, because old phones don't have possibility for internet connection. For example you can't install viber or other application on old mobile phones.
@@SimpleHacker 9982818898
Can i maket with all keyboard phones???
No you can't some of mobile phone it have that that opinion to choose any key
Light jaise lagate ho vo kya hai uska name kya hai
where can i find this sensor? brother
thanks in advance
very important video
You can find it on this link my friend it is about
1 $
www.aliexpress.com/item/32849387755.html?spm=a2g0o.detail.1000014.11.540e158f6eWlkR&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.141931.0&scm_id=1007.13338.141931.0&scm-url=1007.13338.141931.0&pvid=d62013a7-ccad-4c80-8a81-fb294dba62b3