For probability per gate, my first thought (involving a non-MN module; sorry!) was to send the x gate to Mutable Branches, and use the y channel to control probability cv in Branches.
That would be a great way to do it! I didn't know there was a dedicated probability module. Another way would be to modulate a random voltage via VCA with the Y-CV output (as done on Ch1 of modDemix in the video), offset it downward and use it to open an AND gate with the X-Gate at the other input. Something like this is probably what happens internally in the Branches module.
This is great. By the way, if all you have is a VCA but you've got maths or another slew limiter you can use that to convert these "dynamic gates" to envelopes with a curved decay.
Edit: I meant Z-CV! I don't have a Rene yet, but it's coming in the mail tomorrow so I'm just blasting through all your videos tonight. Hear me out: couldn't you maybe do gate probability using state sequencing on the Z-axis? Copy/paste a sequence across 16 states (or 64 if you use all banks) and then mesh program a batch of them. If you were to set a particular step in half of the states to gate off (0% probability) and half of the states to gate on (100% probability), 50% probability could be achieved by sending some random voltage into the Z-CV input. Increase the number of states that have this step gating on or off to increase or decrease the probability anywhere from 0/64 chance to 64/64 chance? You could probably even self-patch the other Rene channel to pass in your Z-CV voltage based on whatever snake pattern its running. I could be way off base on this though?
Great idea! Yes you could absolutely do this. Probably with Z-CV rather than Z-MOD. In fact most anything that can be done within a State/patching on Rene could alternatively be implemented as an internal sequence on the Z Axis.
I've got one on order from Perfect Circuit...from January 2nd. Every day the depth of my patience increases. But, boy I wonder when they'll be in stock again.
@@MAKEN0ISEMUSIC I found out that if I engage sleepmode and lets say have access enabled on all 16 steps, then I can skip steps that arent gate enabled. But on a regular ADSR I need a very short decay/release for the note to get skipped perfectly. Hope this makes sense -:) Can I have notes with long decay/release without the next non gate enabled note playing?
For this you would either set the next note to the same value so that it doesn't change notes during the decay, or, while Sleep is turned on, turn off Access to the step you want silenced. Does that help?
When Rene added ties to the gate I felt bad for asking for probability because Rene has so, so much going for it already....but am i dreaming?
Thanks for your comment that inspired this video!
You're basically famous. Can't even walk down the street in North Carolina! For real though, great call...
dude u legend
If you have a coin toss module like a marbles it is much easier to use the Y controls as a bias towards the probability per gate
Yes!! I’ve done this! One of my favorite patches. You can use the gates from other Rene channels to set which gates you want to be 100% probability.
Great idea for using the other channels!
You’re a great tutor, patchmaster & soundwizard … thank you!
Thanks for watching!
Now if I could only find a Rene! Any new stock in the pipeline?
Yea, they need to send them to the UK we have none too!
I love this patch! Rene is amazing! On my wish list for sure.
Thanks for watching!
AWESOME ❤️❤️❤️ and beautiful when the second line comes in. 🙏🙏🙏
Gold mine channel always expanding. Thanks for this. Precious.
Thanks for watching :D
Thank you for all your tips ! Out of subject question : What’s the best way to clean knobs on Make Noises modules ? Mines quickly get dusty
Stiff Paintbrush
Try a Swiffer Duster. I works like magic; read it on one of the forums; not sure which one. It works best when there are no patch cables plugged in.
compressed air canister aka duster m8
Rene masterclass patching :)
For probability per gate, my first thought (involving a non-MN module; sorry!) was to send the x gate to Mutable Branches, and use the y channel to control probability cv in Branches.
That would be a great way to do it! I didn't know there was a dedicated probability module. Another way would be to modulate a random voltage via VCA with the Y-CV output (as done on Ch1 of modDemix in the video), offset it downward and use it to open an AND gate with the X-Gate at the other input. Something like this is probably what happens internally in the Branches module.
Amazing! Does this work with the optomix as well?
This is great. By the way, if all you have is a VCA but you've got maths or another slew limiter you can use that to convert these "dynamic gates" to envelopes with a curved decay.
Great patch tip!!
wooaahh - always love the vids but this is such a sick jam!
Thanks!
Nifty patching here! ☝️
Thanks again Walker!
It’s like Space Acid. Very cool!
Love the shirt. Will it be available to purchase? Thanks
The shirt is a white Make Noise logo shirt (not currently available, but may be reprinted sometime in the future) that I tie dyed at home :)
Edit: I meant Z-CV!
I don't have a Rene yet, but it's coming in the mail tomorrow so I'm just blasting through all your videos tonight. Hear me out: couldn't you maybe do gate probability using state sequencing on the Z-axis? Copy/paste a sequence across 16 states (or 64 if you use all banks) and then mesh program a batch of them. If you were to set a particular step in half of the states to gate off (0% probability) and half of the states to gate on (100% probability), 50% probability could be achieved by sending some random voltage into the Z-CV input. Increase the number of states that have this step gating on or off to increase or decrease the probability anywhere from 0/64 chance to 64/64 chance? You could probably even self-patch the other Rene channel to pass in your Z-CV voltage based on whatever snake pattern its running.
I could be way off base on this though?
Great idea! Yes you could absolutely do this. Probably with Z-CV rather than Z-MOD. In fact most anything that can be done within a State/patching on Rene could alternatively be implemented as an internal sequence on the Z Axis.
@@MAKEN0ISEMUSIC oh yeah, I got mixed up, but totally meant z-cv! Awesome!
So cool !
So sick ‘n wicked
Thanks!
i just want to buy one :(
I've got one on order from Perfect Circuit...from January 2nd. Every day the depth of my patience increases. But, boy I wonder when they'll be in stock again.
Can I do rests without having a short decay/sustain?
Might need more detail on what you mean by that..
@@MAKEN0ISEMUSIC I found out that if I engage sleepmode and lets say have access enabled on all 16 steps, then I can skip steps that arent gate enabled. But on a regular ADSR I need a very short decay/release for the note to get skipped perfectly.
Hope this makes sense -:)
Can I have notes with long decay/release without the next non gate enabled note playing?
For this you would either set the next note to the same value so that it doesn't change notes during the decay, or, while Sleep is turned on, turn off Access to the step you want silenced. Does that help?
@@MAKEN0ISEMUSIC Thanks! Good idea with the same note! I will try that out.
Yess i have one René V2 and one René Classic !!!
Where can you get a René v2
@@corticallarvae Actually it's very difficult ... I thinks in June would be in Stock again
Yes! Make Noise! Yes..!
To be fair; I was hoping for an update to René with trigger probability :)
TIE DYE SHIRT TIE DYE SHIRT
wow wow wow wow wow
“Super easy, barely an inconvenience!”
2:50 Gay probability!? (even the automatic CC thought you said that!)
😍