Bro I’m really loving these videos! I got a dc1 so you’re the only guy putting in work with the dc1. I’m struggling with mine but I’ll get there soon.. hopefully lol.
It’s get stuck EAD and spider spunk. I use the spunk to create the initial groove and then each hit I use three coats of EAD (flashing each coat) and then a Mohawk strip of spider down the center of each tire and then flash again.
Hey Brother AWESOME VIDEO AS ALWAYS!!! I've got a question for your DR10M as far as what is the quickest E.T. and M.P.H. have you ran with it and THANK YOU MAN FOR ALL OF THE TIME THAT YOU PUT INTO YOUR AWESOME CHANNEL AND GOD BLESS ✝️✝️✝️ SINCERELY CLAY B. AND 🏁SPEED MOB RACING🏁
Hey. Thank you for your support. My best time with the DR10M has been 2.09@74MPH. That’s with the iceman chassis. I’ve heard of others going faster on a stock chassis but I never got there before I destroyed that chassis.
@@juliussmith2630 THANK YOU for getting back to me man that's AWESOME!!! I'll let you know what my DR10M runs I'm waiting on a few more hop up parts EXOTEK and MORBO RACING hopefully here by Wednesday GOD BLESS ✝️ SINCERELY CLAY B
Hey Brother I just wanted to touch base with you and let you know that you talked me into spending some money 🤑 LOL HA HA HA HA HA HA HA I ordered the R-DESIGN LIGHT WEIGHT BULK HEADS all 3 pieces and I got the "MORBO RACING" SERVO RELOCATION KIT AND THE CARBON FIBER FRONT SHOCK TOWER AND THE CARBON FIBER 6-MM TRANSMISSION RISER PLATE AND THE CARBON FIBER REAR BODY MOUNT KIT LONG PLATE AND THE 6-PACK CAP PACK I ALSO HAVE THE TEAM ASSOCIATED FACTORY TEAM CARBON FIBER CHASSIS PLATE FOR THE DR10M AND I JUST ORDERED A BUNCH OF ALUMINUM FACTORY TEAM LIGHT WEIGHT PINIONS 16 THROUGH 30 TOOTH AND SOME FACTORY TEAM SHOCK OIL DIFFERENT WEIGHTS AND "EXOTEK RACING" ALUMINUM ALLOY 3-GEAR TRANSMISSION FOR DR10M AND CARBON FIBER FRONT BUMPER SET AND FLITE SPUR GEARS 81, 87, 92, 99, 104 TOOTH AND SLIPPER ELIMINATOR AND A PROTEK-RC GRAPHENE DRAG RACE 8800mAh 7.6v 200c (8-mm) BULLET PACK AND A "TEKIN" RX-8 GEN-3 ESC WITH THE v295-DRAG TUNE UPDATE INSTALLED AND A TEKIN ELIMINATOR REDLINE GEN-4 (2.0T) DRAG MOTOR AND A TRINITY RACING HOLE SHOT DRAG MASTER (3.0T) W/ 5% CERTIFIED ULTRA TORQUE BLACK TOP 13.5mm ROTOR (TEP1154C) "S.M.R. TUNED" AND I'M RUNNING THE FUTABA T4PV RADIO SYSTEM AND I USE THE HI-TEC X2 AC PLUS BLACK EDITION CHARGER AND TIRES ARE PRO-LINE ULTRA BLUE AND VOODOO REDS AND CYRUL 3DFX ALSO I WILL BE ORDERING A FEW SETS OF CERAMIC BEARINGS FOR IT AS WELL MAN I'VE BEEN LOOKING AT THE NEW UNDERCOVER BLACK EDITION CHASSIS CONVERSION KIT FOR IT THAT THEY JUST COME OUT WITH IT NOT TO LONG AGO I THINK THAT THEY ARE WANTING $245.00 FOR IT AND I'LL HIT YOU UP AND LET YOU KNOW WHAT I DO ON IT MAN I WAS ALSO LOOKING AT THE BRAND NEW EXOTEK VADER PRO CHASSIS KIT BUT I'M ALREADY HEARING THAT IT'S NOT GOING TO BE LEAGAL BECAUSE OF THE FRONT AND REAR SUSPENSION ARMS ARE CARBON FIBER AND NOT COMPOSITE OR PLASTIC SO I DON'T KNOW WHAT TO BROTHER BUT I HOPE THAT YOU POST A NEW BADAZZ VIDEO MAN CAN'T WAIT TO SEE IT AND TELL ME WHAT YOU THINK ABOUT MY DR10M SETUP SO FAR AND GOD BLESS BROTHER ✝️ SINCERELY CLAY B. AND SPEED MOB RACING 🏁
Whats it run without stickem on the tires? My biggest issue has been planting on launch, but i was under the impression that tire prep was okay, but they had to be wiped down. Yours left tracks just rolling back and forth.
I appreciate the comment. It is allowed at some races. What I am doing in the videos is building up my groove as it would be in a real race. That’s all. Have a good season racing.
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
Bro I’m really loving these videos!
I got a dc1 so you’re the only guy putting in work with the dc1. I’m struggling with mine but I’ll get there soon.. hopefully lol.
Dang right!!!! Getting em dialed in!
Good job, keep up the great work
Thank you!
Nice 👍🏾 your dialing them in
Hell yeah! Subbed
I appreciate it!
Need this prep
It’s get stuck EAD and spider spunk. I use the spunk to create the initial groove and then each hit I use three coats of EAD (flashing each coat) and then a Mohawk strip of spider down the center of each tire and then flash again.
Great video 💪🤙💪
Thank you
You should compare duck tape method compared to this method with same setup and fdr
Hey Brother AWESOME VIDEO AS ALWAYS!!! I've got a question for your DR10M as far as what is the quickest E.T. and M.P.H. have you ran with it and THANK YOU MAN FOR ALL OF THE TIME THAT YOU PUT INTO YOUR AWESOME CHANNEL AND GOD BLESS ✝️✝️✝️ SINCERELY CLAY B. AND 🏁SPEED MOB RACING🏁
Hey. Thank you for your support. My best time with the DR10M has been 2.09@74MPH. That’s with the iceman chassis. I’ve heard of others going faster on a stock chassis but I never got there before I destroyed that chassis.
@@juliussmith2630 THANK YOU for getting back to me man that's AWESOME!!! I'll let you know what my DR10M runs I'm waiting on a few more hop up parts EXOTEK and MORBO RACING hopefully here by Wednesday GOD BLESS ✝️ SINCERELY CLAY B
I have tried the Morbo and R Design wheelie bar. I like the R design better. Also R design has some nice lightweight parts for it.
Hey Brother I just wanted to touch base with you and let you know that you talked me into spending some money 🤑 LOL HA HA HA HA HA HA HA I ordered the R-DESIGN LIGHT WEIGHT BULK HEADS all 3 pieces and I got the "MORBO RACING" SERVO RELOCATION KIT AND THE CARBON FIBER FRONT SHOCK TOWER AND THE CARBON FIBER 6-MM TRANSMISSION RISER PLATE AND THE CARBON FIBER REAR BODY MOUNT KIT LONG PLATE AND THE 6-PACK CAP PACK I ALSO HAVE THE TEAM ASSOCIATED FACTORY TEAM CARBON FIBER CHASSIS PLATE FOR THE DR10M AND I JUST ORDERED A BUNCH OF ALUMINUM FACTORY TEAM LIGHT WEIGHT PINIONS 16 THROUGH 30 TOOTH AND SOME FACTORY TEAM SHOCK OIL DIFFERENT WEIGHTS AND "EXOTEK RACING" ALUMINUM ALLOY 3-GEAR TRANSMISSION FOR DR10M AND CARBON FIBER FRONT BUMPER SET AND FLITE SPUR GEARS 81, 87, 92, 99, 104 TOOTH AND SLIPPER ELIMINATOR AND A PROTEK-RC GRAPHENE DRAG RACE 8800mAh 7.6v 200c (8-mm) BULLET PACK AND A "TEKIN" RX-8 GEN-3 ESC WITH THE v295-DRAG TUNE UPDATE INSTALLED AND A TEKIN ELIMINATOR REDLINE GEN-4 (2.0T) DRAG MOTOR AND A TRINITY RACING HOLE SHOT DRAG MASTER (3.0T) W/ 5% CERTIFIED ULTRA TORQUE BLACK TOP 13.5mm ROTOR (TEP1154C) "S.M.R. TUNED" AND I'M RUNNING THE FUTABA T4PV RADIO SYSTEM AND I USE THE HI-TEC X2 AC PLUS BLACK EDITION CHARGER AND TIRES ARE PRO-LINE ULTRA BLUE AND VOODOO REDS AND CYRUL 3DFX ALSO I WILL BE ORDERING A FEW SETS OF CERAMIC BEARINGS FOR IT AS WELL MAN I'VE BEEN LOOKING AT THE NEW UNDERCOVER BLACK EDITION CHASSIS CONVERSION KIT FOR IT THAT THEY JUST COME OUT WITH IT NOT TO LONG AGO I THINK THAT THEY ARE WANTING $245.00 FOR IT AND I'LL HIT YOU UP AND LET YOU KNOW WHAT I DO ON IT MAN I WAS ALSO LOOKING AT THE BRAND NEW EXOTEK VADER PRO CHASSIS KIT BUT I'M ALREADY HEARING THAT IT'S NOT GOING TO BE LEAGAL BECAUSE OF THE FRONT AND REAR SUSPENSION ARMS ARE CARBON FIBER AND NOT COMPOSITE OR PLASTIC SO I DON'T KNOW WHAT TO BROTHER BUT I HOPE THAT YOU POST A NEW BADAZZ VIDEO MAN CAN'T WAIT TO SEE IT AND TELL ME WHAT YOU THINK ABOUT MY DR10M SETUP SO FAR AND GOD BLESS BROTHER ✝️ SINCERELY CLAY B. AND SPEED MOB RACING 🏁
What sticky sauce are you using? That's insane
It’s get stuck EAD and spider spunk
What gearing were you running during these passes
Different gearing on different cars. Somewhere between 9-10 FDR with a ghost motor. 7.8-8.2 FDR with the green castle motor.
What type of sauce are you using
Get stuck prep. EAD and spider spunk
Whats it run without stickem on the tires? My biggest issue has been planting on launch, but i was under the impression that tire prep was okay, but they had to be wiped down. Yours left tracks just rolling back and forth.
It depends on the race class and race director. Most of the times in outlaw or street eliminator, you can use whatever prep you like.
I haven’t run it dry tire. So don’t know what it will run without the prep.
I've gotten to 2.5, but tires have no good, and only around 60-65. I'm certain it will do under 2 if tires just stick
What gears in it
im sorry but that rollout is bad form, deff not allowed in races
I appreciate the comment. It is allowed at some races. What I am doing in the videos is building up my groove as it would be in a real race. That’s all. Have a good season racing.
Ok bro can you help me out with my car I’m new to the tuning stuff and I need some help thanks !
It’s been a while since I have been on my account. Let me know what issues you need help with and I can create content around it.