after resetting the lock, push the #1 button, it will start to flash, touch a card to the lock, it will beep 1 time, then pull it away. wait 5 seconds so the lock can reset. That card is now programmed as the manager card.
you mean the striker pin? If the locking striker pin came off, then I assume the C clip broke on it. Thats what holds the locking pin onto the striker. Probably need to order a new striker. I assume you have striker A -- Part # is "KR-S80 Strike A"
@@jareds839 not all, but most likely if you get 13.56Mhz frequency cards, they will work. for sure ours do. here is the link. lockconnection.net/rfid-card-for-13-56-mhz-rfid-locks/
It reset the lock back to factory settings. Nothing is programmed. You will have to set the mode you want, re program the manager card, then program the usercards.
@@lockconnection3731 I believe I got it to program a manager card. When I swipe the manage card it seems to program a user card but when I try to use the user card it blinks red/white. Any ideas? Thanks for your help!
@@lockconnection3731 For some reason my batteries all went from 1.5V to 0.65V pretty quickly. Expiration of 12/2030 so don't know if they are bad batteries or the unit is draining them quickly, but I got it to work for now.
@@MattCA88 They should last at least 6 to 7 months with a few times a day use. If you have the emergency open alarm on and it goes off several times, that does run batteries down pretty fast. Make to use name brand alkaline batteries or even Lithium max energizers that are disposable.
I recently purchased a home and found one of these in a bedroom. I took the shelf apart and found this unit in the shelf. I don't have any of the cards. is there a place where i can purchase a manager and access cards?
Hi Jacob, as long as you have access to the buttons on the lock you can create a new manager card and then set new user cards using that new manager card. You can order the cards here: lockconnection.net/rfid-card-for-13-56-mhz-rfid-locks/.
I have a tactical shelf and I put batteries in it and I I locked it and I want to use my user cards and it just goes beep beep beep beep beep beep what do I do
How can you reset a manager card if the reset button is pushed?
after resetting the lock, push the #1 button, it will start to flash, touch a card to the lock, it will beep 1 time, then pull it away. wait 5 seconds so the lock can reset. That card is now programmed as the manager card.
Thank you!
My lock always returns to the unlocked position. I’ve tried everything to reset it
All I get is red and white flashing lights......What happens if I hit the reset on the light side?
How do you get locking pin back in if it came out?
you mean the striker pin? If the locking striker pin came off, then I assume the C clip broke on it. Thats what holds the locking pin onto the striker. Probably need to order a new striker. I assume you have striker A -- Part # is "KR-S80 Strike A"
What if I misplaced my manager and user cards how can I program it to a new rfid card?
you will have to get new cards and program to the lock. you will have to have access to atleast the #1 button on the back of the lock
@@lockconnection3731 I have access to all 4 buttons. Can I use any rfid card to program, or possibly use my phone or something?
@@jareds839 not all, but most likely if you get 13.56Mhz frequency cards, they will work. for sure ours do. here is the link. lockconnection.net/rfid-card-for-13-56-mhz-rfid-locks/
@lockconnection3731 How many user cards can this lock handle? I need a lock that can support 15-20 user cards. Thanks
Thank you!
What happens if you long hold reset? I was having problems and did a long hold, can't seem to program anything.
It reset the lock back to factory settings. Nothing is programmed. You will have to set the mode you want, re program the manager card, then program the usercards.
@@lockconnection3731 I believe I got it to program a manager card. When I swipe the manage card it seems to program a user card but when I try to use the user card it blinks red/white. Any ideas? Thanks for your help!
@@lockconnection3731 For some reason my batteries all went from 1.5V to 0.65V pretty quickly. Expiration of 12/2030 so don't know if they are bad batteries or the unit is draining them quickly, but I got it to work for now.
@@MattCA88 They should last at least 6 to 7 months with a few times a day use. If you have the emergency open alarm on and it goes off several times, that does run batteries down pretty fast. Make to use name brand alkaline batteries or even Lithium max energizers that are disposable.
Answered my question in less than 30 seconds. God bless you!
I recently purchased a home and found one of these in a bedroom. I took the shelf apart and found this unit in the shelf. I don't have any of the cards. is there a place where i can purchase a manager and access cards?
Hi Jacob, as long as you have access to the buttons on the lock you can create a new manager card and then set new user cards using that new manager card. You can order the cards here: lockconnection.net/rfid-card-for-13-56-mhz-rfid-locks/.
@@lockconnection3731 perfect! thank you! does that link go to the manager card or the user card? or can those cards be used for both?
@@jacobweibel2912 Any card be used as both. If you order 3, I will send ones already labeled manager card and user card for you
@@lockconnection3731 sounds great, ordered! Thank you for the help!
RFID cards can be made into either a manager card or user card. Its created at the lock level.
Right on 👍🏻
I have a tactical shelf and I put batteries in it and I I locked it and I want to use my user cards and it just goes beep beep beep beep beep beep what do I do
you mean it's a tactical traps shelf?