Hey Nick wut did you ever end up doing with that fw15 30” walk behind? I flipped my timemaster I been using like on damp sorta wet grass days in forced to mow on, I know you blow thru mowers so you prolly been thru like 20 mowers since this video. I’m just now getting my better mowers and the time waster with the pullies always going out and it slinging belts and the blades hitting, I gotta do something else
Tyler new HDX is a really good setup. The trans is 3x larger than regular model. Strong enough it will drag you up a hill! Have seen zero issues from the new HDX trans since they came out last year.
I bought an Ingersoll 21 commercial mower, and Redmax blower and trimmer from this guy about 6 years ago. He was awesome, he came in on his day off when him and his wife had plans, I didn't know at the time because I was driving from out of state to pick it up and called him. He said to come on in and waited on me to show up. Got an awesome deal on everything there, would buy there again if I wasn't in Tx now.
@@lawnbarber9182 … thanks! Plus I understand you did not have to pay sales tax, being out of state? Did they ship it to you fully assembled and tested?
@@daveallen4194 no tax and fully assembled. I turned the key it started up and I drove it off pallet. They test them before shipping. they come ready to work not wrapped in plastic still
Hey nick that’s an shop, came to find out it’s in Ga and came to find out it’s down the street from me🤣 literally 15-20 min drive. I’m in the beginning stages still so maybe if I work hard I can get one of these cool mowers. Thank you
Snapper Pro SW15 and Ferris FW15 are the same mowers. Different paint and stickers. We stock which ever is available from the factory when we need to order.
@@LemonySnicket-EUC mulching kit sucks because mulching to bits just doesnt work unless its not much growth. Buy the blades and and quikchute attachment if you dont mind spending 500$. It makes a world of difference but you will need to clean it up with a leaf blower its just not nearly as hard on the blade belts. I am now more into robot lawn mowers though hoping to have first one installed soon
I wish I did my homework.. if I knew Briggs put an engine on one of the stand up mowers, I would've bought that instead. Bought a wright standard and it broke down in 11 months. 48 hours on it. It's in the shop for up to 2 months. I'm probably gonna sell it whenever I get it back, and go by me a stand on with a Briggs on it.
but nick! did you buy it or just demo? and why not demo that 30” toro for granny yards. i run my small 30 granny yard business up here in new york and use to toros (xmark) rather and they run great. love your videos btw
For a one man show grandma yards of the best of the best , you get good money ,small equipment you’re always excused if you can’t make it ,they always have a little something extra when you have time to do it there’s a possibility of buying their car and house at the end!
That snapper pro has a Honda engine. That’s enough to sell me. I’d use that on my 4 acres. My Honda hrx 217 is an absolutely beast for my little .39 acres hahaha
The man with the gray hair that kept incerting himeself into your video has zero class. He reminded me of a tag along. He simply couldn't stand not being part of the question and answers.
I have Walker 48 inch decks with the grass handling system and diesel engines and we cut 125 lawns a day nobody cries in the spring time and all the other companies say wow I should get one of those and our properties go from 2000 ft.² to 3 acres. We have three machines running three Weedwhacker guys one blower guy side door on dump truck with ladder unstoppable. It’s a crew cab Isuzu and a 20 foot American hauler enclosed trailer and in the fall we take one mower out and put in a walker diesel with a Buffalo turbine leaf blower. We are top dog. I bought a scag blower for fun to compare to the Buffalo turbine on the diesel Walker diesel Walker all day long. I could not even put the Scagg blower up the ramp on the trailer the shoot was hitting
Bradley isn’t a bad unit for the money. The issue you’ll run into is as a company Bradley isn’t a real manufacturer. He’s a “self storage facility”, dealer, and imports products from China and assembles at his store. Almost all the components are several years old leftover from other manufacturers. Think everything discontinued or closeout he buys, then assembles them into mowers. As a cutter your issue will be dealer support, almost no dealers sell. Getting parts is a pain, warranty isn’t easy. It’s a lot more steps for a dealer to support you, so keep this in mind as part of why the mower is so cheap to start with.
Okay so I'm kind of new to the channel I have no idea where that dealership is but it looks awesome I'm in Georgia and I heard him mention he was enjoying the Georgia weather what part of Georgia in the name of the dealership is that Nick?
I’ve got the craftsman commercial 28” cut it has been a great mower overall. It’s not the best for very tall grass but under normal conditions it does a good job for quality of cut and ease of use.
is that the m430? ive read a lot of reviews and most seem to be bad, like a 2.5 star mower, but i still want to try it. Been thinking of a HRX or a Timemaster but still like the look of the m430
@@wc3246 no this is model#247.397900. This was the line from when it was available only at Sears from part of their professional line. Now a lot of the two are the same. The deck, drive system, wheels, handles and engine. Mine has solid front wheels that do not move but makes it easy as a one handled full height adjustment. I've used it a lot for small and medium sized lawns. If you watch my video I made you'll see a quick demonstration on how the cut looks and how it stripes very well. I think this model is better than the new as you get a stripe kit with it instead of a bagger. It's very heavy at 180 pounds so I have ramps to load it into my truck with the deck at high. The worst part is the front 8" or so is just a plastic piece that does not cut so it's not a fine details type of mower. Oil changes are very easy, and I've yet to change the belt. I found mine restored to almost brand new for $500 near me. At that price it's very worth it
@@LemonySnicket-EUC Great. First 2 went 7 seasons with typical wear items like belts and cables. Front adjustment plate every 2 or 3 seasons. The next 2 are of the most recent model and theyre even better with the same wear items. Now, we have broken handles but its from a large mower occasionally riding over its wheel stop in the trailer...operator error 100%. Easy weld.
Also, Wright ist fertich?! Crvena je ipak ljepša boja, nadam se da je kvaliteta bar blizu, jer koliko sam upoznat, Wright bi trebao biti premium, Ferris više konfekcija... Eh, da mi je bilo koji od tih, mada je bih Walkera ipak... Uživaj!!!
I'm actually super excited to see that thing at work. Love these videos. Wish that guy was closer to me. Would love to give him my buisness. Also the truth is...Sensei Nick is Ninja purchasing Ninja mowers lmao.
As soon as i see You Nick, i got some urgent Will for "krumpirusha"... And i remember my old friend Drago Mijatovich, thanks to whos wife, i eat the best one in my life... You make me hungry...
Glad to see you going with Ferris for everything. We run exclusively Ferris and absolutely love them!
Love Master mower! When you said feels like you are home I feel the same when I'm there.
Whipper looks a lot like McLovin from Super Bad just saying.
Mcwhipper
Demoed the ferris FW15 didn’t really like it on my jobs I have Especially the ones that really steep it was just way too heavy it’s like 250 pounds
Can't wait to see you use the snapper pro mower and review it for use Nick
For sure my ninja 😉👊🏻💯
I bought a FW-15 Ferris Version and love it.
14:35- you're welcome
Bought my Z3 from master mowers they shipped it to me here in Oklahoma. Worth the 500 in shipping. I saved thousands.
😉😉👍🏻👊🏻 wapachaaaaaaa
I live in okc did they give you a good price?
Juan pablo no a great price
Will have to check it out. Just on the other side of Atlanta from me.
Dang can’t believe you were in Marietta ga that’s where I mow
Wapacha 😉😉🤙🏻
Hey Nick wut did you ever end up doing with that fw15 30” walk behind? I flipped my timemaster I been using like on damp sorta wet grass days in forced to mow on, I know you blow thru mowers so you prolly been thru like 20 mowers since this video. I’m just now getting my better mowers and the time waster with the pullies always going out and it slinging belts and the blades hitting, I gotta do something else
I wonder what the salesman thinks of the new Toro 30" HDX
Tyler new HDX is a really good setup. The trans is 3x larger than regular model. Strong enough it will drag you up a hill! Have seen zero issues from the new HDX trans since they came out last year.
Master Mowers is where it’s at!
The turfmaster sidechute will go thru some thick grass, but yea overall not nearly as heavyduty as the other mowers, but the price might tell that.
looks like maybe $700 difference, probably worth the upgrade to the ferris/snapper.
Great people at Master Mower. Bought my first Zero Turn there and will more than likely buy another soon!
Awesome people for sure 👍🏻👊🏻
I bought an Ingersoll 21 commercial mower, and Redmax blower and trimmer from this guy about 6 years ago. He was awesome, he came in on his day off when him and his wife had plans, I didn't know at the time because I was driving from out of state to pick it up and called him. He said to come on in and waited on me to show up. Got an awesome deal on everything there, would buy there again if I wasn't in Tx now.
Mike has sold a few machines to me,even with shipping he beats my local prices
Does Master Mowers ship new and assembled zero turns to the lower 48 states? Approx cost to ship to the upper mid-west?
Call Michael, he can get you the details Dave. He’s number is in the description
Got mine shipped to Oklahoma. It was a z3 61inch 500 to ship. Worth it because I saved thousands
@@lawnbarber9182 … thanks! Plus I understand you did not have to pay sales tax, being out of state? Did they ship it to you fully assembled and tested?
@@daveallen4194 no tax and fully assembled. I turned the key it started up and I drove it off pallet. They test them before shipping. they come ready to work not wrapped in plastic still
David please text or email us directly for a quote. Nick has my contact info in comments under the video post.
Nick, how do the Ferris mowers stripe, thinking of getting one but don't want to lose my striping capability
They stripe amazing 👍🏻💪🏻
Does Georgia have sales tax? What is the rate?
No tax if you’re purchasing out of state
Dave Allen yes sales tax is 6% for GA residents. No tax for out of state sales.
Hey nick that’s an shop, came to find out it’s in Ga and came to find out it’s down the street from me🤣 literally 15-20 min drive. I’m in the beginning stages still so maybe if I work hard I can get one of these cool mowers. Thank you
😉👊🏻👍🏻
Stop by and visit us! Even if you’re not ready to buy we always want to meet our local peeps!
yes save money 😂😂🤣 I finally got my new mower stand on exmark after 5 years mowing I was tiered using my small Honda push mower
Was he at master mower in Marietta Ga 😳💯🤙
Where are you located?
What’s the name of that snapper walk behind mower
Snapper SW15
Snapper Pro SW15 and Ferris FW15 are the same mowers. Different paint and stickers. We stock which ever is available from the factory when we need to order.
Just ordered a fw15 Im hoping the mulching kit mulches at least when dry
How did it work out ?
@@LemonySnicket-EUC mulching kit sucks because mulching to bits just doesnt work unless its not much growth. Buy the blades and and quikchute attachment if you dont mind spending 500$. It makes a world of difference but you will need to clean it up with a leaf blower its just not nearly as hard on the blade belts. I am now more into robot lawn mowers though hoping to have first one installed soon
@@DylanFkinGuenther Thanks for the update !
I purchased the FW15 the end of last summer. It’s a little kick ass mower with the hydro transmission. Awesome!
Where is this dealer located?
Damn nice shop wish I was closer
Dude with the glasses looks like mcLovin!! Lmao 🤣
Holy sh*t .. you got McLovin on your show!
I wish I did my homework.. if I knew Briggs put an engine on one of the stand up mowers, I would've bought that instead. Bought a wright standard and it broke down in 11 months. 48 hours on it. It's in the shop for up to 2 months. I'm probably gonna sell it whenever I get it back, and go by me a stand on with a Briggs on it.
but nick! did you buy it or just demo? and why not demo that 30” toro for granny yards. i run my small 30 granny yard business up here in new york and use to toros (xmark) rather and they run great. love your videos btw
For a one man show grandma yards of the best of the best , you get good money ,small equipment you’re always excused if you can’t make it ,they always have a little something extra when you have time to do it there’s a possibility of buying their car and house at the end!
But Nick! Wrights were the bumblebees so what nickname will the Ferris' be???
Still thinking about it 😉😉
@@sgninjas anything but The Ladybugs lol
Matthew Vaughn hahaha 😆 I was thinking Ferrari’s 😏🤣😁
There is nothing better than walker if you are bagging or doing fall clean up
It sucks being in the north west and not having all those options up here
Love master mower. Best customer service I have ever received. Michael is the man!
That snapper pro has a Honda engine. That’s enough to sell me. I’d use that on my 4 acres.
My Honda hrx 217 is an absolutely beast for my little .39 acres hahaha
McLoving doing yards now???
Awesome brother. Very smart decision on your (entire) setup. Love the videos, awesome dealer and very informative video my man. Thanks and God bless
My Ninja, Thank you 😉👊🏻💯
@@sgninjas thank you brother... God bless my friend
In my area only cubcadet crap and honda wich is not Wide área mower. They dont sale ferris or Worldlawn. Anything made in usa.
Can you do a startup and video tour where they put on your trailer
Plan on it for sure 😉
Give me the address I want to order one and I don’t know how much the price
Info is in the description
Wait a minute,Toro own exmark, in Washington every body prefers exmark than toro because they said it’s stronger.
The worst mower I ever bought was a Wright .
Im so excited to see how well they stripe the yards! But nick those are some nice mowers!
Nick I need to see that Snapper Pro Sw15 in action plz lol !!!
Yessir, me and you both....can’t wait to use it
The man with the gray hair that kept incerting himeself into your video has zero class. He reminded me of a tag along. He simply couldn't stand not being part of the question and answers.
It’s part of the whole bit and he added useful info
I have Walker 48 inch decks with the grass handling system and diesel engines and we cut 125 lawns a day nobody cries in the spring time and all the other companies say wow I should get one of those and our properties go from 2000 ft.² to 3 acres. We have three machines running three Weedwhacker guys one blower guy side door on dump truck with ladder unstoppable. It’s a crew cab Isuzu and a 20 foot American hauler enclosed trailer and in the fall we take one mower out and put in a walker diesel with a Buffalo turbine leaf blower. We are top dog. I bought a scag blower for fun to compare to the Buffalo turbine on the diesel Walker diesel Walker all day long. I could not even put the Scagg blower up the ramp on the trailer the shoot was hitting
Great video brother good looking mowers
Thanks brother, appreciate that
Snapper pro sw15 looks amazing,
Hey Nick, I have a quick question that you may be able to answer. What are you thoughts on the Bradley 52 compact stand-on with the Briggs engine??
Don’t like the Bradley’s, they are not made for tall individuals only for short people so they wouldn’t work for me.
Bradley isn’t a bad unit for the money. The issue you’ll run into is as a company Bradley isn’t a real manufacturer. He’s a “self storage facility”, dealer, and imports products from China and assembles at his store. Almost all the components are several years old leftover from other manufacturers. Think everything discontinued or closeout he buys, then assembles them into mowers.
As a cutter your issue will be dealer support, almost no dealers sell. Getting parts is a pain, warranty isn’t easy. It’s a lot more steps for a dealer to support you, so keep this in mind as part of why the mower is so cheap to start with.
Okay so I'm kind of new to the channel I have no idea where that dealership is but it looks awesome I'm in Georgia and I heard him mention he was enjoying the Georgia weather what part of Georgia in the name of the dealership is that Nick?
Look in the description of this video Dustin, I put all the info to Michael and the dealership address.
Master Mower, Marietta, GA
What an inventory of mowers
The 36 with 23HP! sweet my Ninjas
I watch a lot of lawn videos. Your music got me out of the lawn and trying to go to the club.. I liked the comparison.
I know that dealer! In Georgia! What brought you here from Oklahoma?
I’m not from there but yes the dealership is rockinnnnnn
Awesome 36 can’t wait to see you use it. I’m buying it next week.
Nice move going to ferris Nick. Master Mowers rules!
Solid dealership for sure 👍🏻👊🏻
He is the real deal. I wish we had one like him here in Mossouri
I’ve got the craftsman commercial 28” cut it has been a great mower overall. It’s not the best for very tall grass but under normal conditions it does a good job for quality of cut and ease of use.
is that the m430? ive read a lot of reviews and most seem to be bad, like a 2.5 star mower, but i still want to try it. Been thinking of a HRX or a Timemaster but still like the look of the m430
@@wc3246 no this is model#247.397900. This was the line from when it was available only at Sears from part of their professional line. Now a lot of the two are the same. The deck, drive system, wheels, handles and engine.
Mine has solid front wheels that do not move but makes it easy as a one handled full height adjustment. I've used it a lot for small and medium sized lawns. If you watch my video I made you'll see a quick demonstration on how the cut looks and how it stripes very well. I think this model is better than the new as you get a stripe kit with it instead of a bagger.
It's very heavy at 180 pounds so I have ramps to load it into my truck with the deck at high.
The worst part is the front 8" or so is just a plastic piece that does not cut so it's not a fine details type of mower.
Oil changes are very easy, and I've yet to change the belt. I found mine restored to almost brand new for $500 near me. At that price it's very worth it
Smacker pro??? Exciting!!!
Not a walker guy? Walkers are amazing
That was interesting! Great job!
Great video my Friend!
Thanks Roy, good to see you around 😉👊🏻
seems to me you have a lot more mowers than you need for a 2 man operation...
No such thing.
The last part did seem like it was staged🤷♂️
All too heavy. Timemaster FTW
How's that holding up for you ?
@@LemonySnicket-EUC Great. First 2 went 7 seasons with typical wear items like belts and cables. Front adjustment plate every 2 or 3 seasons. The next 2 are of the most recent model and theyre even better with the same wear items. Now, we have broken handles but its from a large mower occasionally riding over its wheel stop in the trailer...operator error 100%. Easy weld.
Sealed bearings are CRAP!!!!!!!!!!!!!!!!
awesome video son!
Too bad I’m not closer either to master mowers
I live in Oklahoma they shipped it to me for 500 dollars. I saved over 3k going to them. Worth it give them a shout
Ninja Mike in the house!!!! On a very wet Thirsty Thursday
Master Mowers is the Best Dealer 👑♥️ around and Michael is awesome Salesman by far.... 💯👊🏾👑
💯 agree
Random black cat mower 😂
🤣🤣
His nickname has to be mclovin
Whipper Will
Nice video.
Ferris all the way. awesome !!!
How about that you get try it before you buy it BUT BUT he said don,t BUT ME try it if you like it the price will be nice peace out nick✌️
Michael and RC are legit. I go too them from Bama. Great customer service!
Solid Ninjas for sure
Wow u just dropped 20,000.00 better get more lawns
The Cutting Edge Lawn Care 😏😉
Also, Wright ist fertich?!
Crvena je ipak ljepša boja, nadam se da je kvaliteta bar blizu, jer koliko sam upoznat, Wright bi trebao biti premium, Ferris više konfekcija...
Eh, da mi je bilo koji od tih, mada je bih Walkera ipak...
Uživaj!!!
Walker best on the market
I love yall reaction at the end.
Like Christmas
Nice...🤘🤘🤘
Thank You
Ant no February 29 lmao
*leap year
Have a walker. need to get me a ferris z1 36inch
I'm actually super excited to see that thing at work. Love these videos. Wish that guy was closer to me. Would love to give him my buisness.
Also the truth is...Sensei Nick is Ninja purchasing Ninja mowers lmao.
😉👊🏻💯
For a moment I thought was McLOVIN min 2:38
That ending was funny :)
the real reveal was the neck beard disappering lol
Haha 😂
Love your vids
Wright # 1
my ninja
As soon as i see You Nick, i got some urgent Will for "krumpirusha"... And i remember my old friend Drago Mijatovich, thanks to whos wife, i eat the best one in my life...
You make me hungry...
Krompirusa sa suhim mesom ajjjjjj boli glava sefe 😉😉😆🤙🏻
@@sgninjas neka boli, ali isplati se...
Hehe bas tako 😉😉
McMickey
Look they at the mowership
No more neck beard 🤙🤙
Haha
What’s up
Briggs and Scrap Iron.
But Nick 😳
toro turf master klogs like mad i dont like it
Great video today but nick.
😉😁👍🏻