GS4 VFD - V/Hz vs Sensor-less Vector at AutomationDirect
ฝัง
- เผยแพร่เมื่อ 28 ก.พ. 2018
- www.automationdirect.com/VFD - (VID-DR-0053)
- A brief side-by-side comparison of the pros and con's of Volts Hertz vs Sensor less Vector VFD control modes and why it's important to use the right motor.
To learn more visit www.automationdirect.com/VFD
Check out all of our videos at www.AutomationDirect.com/Videos
To subscribe: th-cam.com/users/automati...
Facebook: / automationdirect
Twitter: / automationdirec
LinkedIn: / automationdirect
**Prices were valid at the time the video was released and are subject to change.
Related AutomationDirect.com part numbers: GS4-21P0,GS4-22P0,GS4-23P0,GS4-25P0,GS4-27P5,GS4-2010,GS4-2015,GS4-2020,GS4-2025,GS4-2030,GS4-2040,GS4-2050,GS4-2060,GS4-2075,GS4-2100,GS4-41P0,GS4-42P0,GS4-43P0,GS4-45P0,GS4-47P5,GS4-4010,GS4-4015,GS4-4020,GS4-4025,GS4-4030,GS4-4040,GS4-4050,GS4-4060,GS4-4075,GS4-4100,GS4-4125,GS4-4150,GS4-4175,GS4-4200,GS4-4250,GS4-4300 - วิทยาศาสตร์และเทคโนโลยี
Excellent Sir
Thanks for the feedback!
Did you know that we have over 1100 automation videos like it at:
www.automationdirect.com/videos
and
www.automationdirect.com/cookbook
Thank you
Glad you found it helpful! We have over 1000 videos like it at www.automationdirect.com/videos and www.automationdirect.com/cookbook.
What so it can only control speed from 30-50 rpm? I guess there's some mistake in understanding. Please correct me. Thanks
Are you referring to the comment at 1:24? If so, the it is saying that in V/Hz mode you can only go down to 30-50 RPM, V/Hz doesn't work well below that min speed.
Do these support 8-9 wire encoder feedback for rigid tapping?
Hi Brian,
This drive family doesn't support encoder feedback, but we do have a new drive family releasing soon that does. Look for that announcement later this summer.
AutomationDirect.com Thank You I will check them.
👏
Thanks! Did you know we have over 1000 videos just like it located here: www.automationdirect.com/videos