It looks like Dave and yourself have been busy on this App. The improvements look great and very much what I was looking for. Thanks for bringing this to us.
Hi Harry Thanks to Dave and you for the improvements. It is great to see a global battery inventory. We used the app for the first time today and I would like to give some feedback. This is positive and is intended to help improve the product even further. We were using a DS -16 II. The display was set to double size. We are in Australia where it is currently summer. It was a very bright sunny day and we were flying outside. The pilot had the audio warnings set up and did not look at the screen while flying. We had one observer on the left hand side and one observer on the right hand side of the transmitter. Neither of us could read the dynamic data for % used or mAH remaining. This applied to both colours in the bar graph. My suggestions to resolve this are: 1) Use larger fonts and/or 2) Make the fonts bold and/or 3) Create a clear "box" in the bar graph behind the figure to highlight it better and/or 4) Lighten the colour/shading of the bar. I might point out that all the normal telemetry items and Jeti text are easy to read in these lighting conditions.
Thank you for the work put into the apps. Used this today and it's great! Really like having warning at different levels for different batts! An idea for the future: battery names (had to number all my batts, which had A1 A2 etc style tags since i fly them in pairs most of the time). Easier to pick them out in a list with names than just numbers when hving lots of the same type for all models!
Does this work with a DS-16? I downloaded it ok but when I select it I get : ??N/A?? in the name box and Version N/A. I deleted it and reinstalled but got the same results. Thanks
If you are using a Mac the link to the script goes here. Open Preferences in the Jeti Studio app (top left of the screen). This opens a dialog box and on the right side is a tab to select (apps sources) and you PASTE in the link here.
Thanks for the review! Perhaps it should be indicated that in order to implement all this it is necessary to use a telemetry sensor and indicate an approximate list of devices?
It’s a brilliant app, I have followed all the instructions, but it won’t display on my DS24, I’m not sure if I need to have a model connected to it before hand or it’s because I have information already on page one, can I or how do I add it to page two Harry.
Dear Harry, is it possible to increase the maximum capacity from 9999mAh to 15000mAh for example. I myself use large capacity batteries. I really like the app.
Jeti's API imposes a limit, but Dave has got around it in other apps by including a multiplier. I will mention it to him, but we are heavily involved in preparing some other apps at the moment so I cannot say how quickly he can do it.
Hi, Dave has been very quick, he has been able to increase the maximum mAh to 32767 which is the largest number that Jeti will permit. It is ver 2.4 which is available from Jeti Studio now.
You don't download the app. Once you setup Jeti Studio with the link pasted in the correct location. Plug in your TX, select Tools, Transmitter Wizard, LUA App Manager, and unselect Show Only Compatible. All the LUA apps from this developer will now be listed.
It looks like Dave and yourself have been busy on this App. The improvements look great and very much what I was looking for. Thanks for bringing this to us.
Hi Harry
Thanks to Dave and you for the improvements. It is great to see a global battery inventory.
We used the app for the first time today and I would like to give some feedback. This is positive and is intended to help improve the product even further.
We were using a DS -16 II. The display was set to double size. We are in Australia where it is currently summer. It was a very bright sunny day and we were flying outside. The pilot had the audio warnings set up and did not look at the screen while flying. We had one observer on the left hand side and one observer on the right hand side of the transmitter. Neither of us could read the dynamic data for % used or mAH remaining. This applied to both colours in the bar graph.
My suggestions to resolve this are:
1) Use larger fonts and/or
2) Make the fonts bold and/or
3) Create a clear "box" in the bar graph behind the figure to highlight it better and/or
4) Lighten the colour/shading of the bar.
I might point out that all the normal telemetry items and Jeti text are easy to read in these lighting conditions.
Which colour scheme are you using?
@@cotswoldpilot The bar graph was initally blue and then red on the first warning.
@@rjraft which colour scheme are you using?
@@cotswoldpilot We used the app in two separate models. One used light green and the other used light blue for the colour profile.
Thank you for the work put into the apps. Used this today and it's great! Really like having warning at different levels for different batts!
An idea for the future: battery names (had to number all my batts, which had A1 A2 etc style tags since i fly them in pairs most of the time). Easier to pick them out in a list with names than just numbers when hving lots of the same type for all models!
Fantastic updates! Many thanks to Dave!
Does this work with a DS-16?
I downloaded it ok but when I select it I get : ??N/A?? in the name box and Version N/A.
I deleted it and reinstalled but got the same results.
Thanks
If you are using a Mac the link to the script goes here. Open Preferences in the Jeti Studio app (top left of the screen). This opens a dialog box and on the right side is a tab to select (apps sources) and you PASTE in the link here.
Thanks for the review! Perhaps it should be indicated that in order to implement all this it is necessary to use a telemetry sensor and indicate an approximate list of devices?
If people cannot work that out for themselves.......
Hi! Where do I need to copypaste the link in the Jeti studio? :)
It's not clear for me...
On PC (like it says in the video) top left of the Jeti Studio app File then Configuration then select Apps Sources PASTE link in there.
Which Sensor do you use for the app?
Any that counts mah.
It’s a brilliant app, I have followed all the instructions, but it won’t display on my DS24, I’m not sure if I need to have a model connected to it before hand or it’s because I have information already on page one, can I or how do I add it to page two Harry.
You need to add it in Displayed Telemetry
@@cotswoldpilot sorry Harry bad day at the office, brain went numb after setting up a friends Edgetx radio. thank you
Dear Harry, is it possible to increase the maximum capacity from 9999mAh to 15000mAh for example. I myself use large capacity batteries. I really like the app.
Jeti's API imposes a limit, but Dave has got around it in other apps by including a multiplier. I will mention it to him, but we are heavily involved in preparing some other apps at the moment so I cannot say how quickly he can do it.
Hi, Dave has been very quick, he has been able to increase the maximum mAh to 32767 which is the largest number that Jeti will permit. It is ver 2.4 which is available from Jeti Studio now.
@@cotswoldpilot Thanks for the quick responce,I have one more question, but it needs to be described properly first.
Where does one download this app from?
You don't download the app. Once you setup Jeti Studio with the link pasted in the correct location. Plug in your TX, select Tools, Transmitter Wizard, LUA App Manager, and unselect Show Only Compatible. All the LUA apps from this developer will now be listed.
@@ricad58 thanks
Do it not work on the ds12
It does