Hi, Yvonne: A "Negative" design is a design where the focus of the picture is removed from the piece, as the one that I am using in this video. The images of the butterfly and plant are depicted by voids in the background. A "Positive" design would be done by removing the background area and leaving the focus parts (such as the butterfly and plants) as the picture. I hope that clarifies. :)
Hi Sheila: You are the first scroller I've seen that uses the blade to pop out the cut-outs. I started doing that and it works great. Thank you for your demonstrations. Chuck
Ive just been watching this video with my wife. This just shows the difference between men and women. I said, look at the scroll saw skill this women has. My wife said, sod that look at her nails, their lovely..... Ive only just stopped laughing. Great video.
LOL, Chris! Yes - you don't have to have short nails to do woodworking. I just don't muss with mine very much. Trick is to keep your fingers far enough away from the blade so you don't nick the end off. (Yes - I have done that!) I often assimilate scroll sawing to using a sewing machine. You know where the needle is and you don't shove your finger in there. Same with the scroll saw blade. You just "know" your limits and there are very few injuries really. :) Glad you liked the video.
Why thank you very much! This one came out a little longer than I expected because it is a compilation of short takes. But I do think that you can see everything clearly and hopefully I got the points across. Thanks for the comment! :)
Sheila Felicitaciones, tienes unas manos maravillosas !! yo recién estoy empezando a cortar y tardo mucho, no sé si la diferencia está en tu máquina de mayor potencia, o usas maderas mas blanda, o es cuestión de habilidad y nada más. Un saludo desde Argentina. Alicia.
I'm new to Scroll Saw work and don't find blades using the same reference numbers. Where do you get your blades? Menard's is my only source where I live and you can point me in the right direction! Thank you very much 😊!!!
Thank you, Dave: I use Olson Scroll Saw Blades and get them from The Wooden Teddy Bear online. They have the best prices and you can mix and match sizes for the best discounts. Here is the link to them: woodenteddybear.com/collections/blades/olson-scroll-saw-blades?sort_by=title-ascending I hope it helps. :) Sheila
Gracias Alicia. Espero que encuentre que le gusta desplazarse tanto como yo. Con un poco de práctica, usted será un experto antes de que te des cuenta! Gracias por las amables palabras. Sheila :)
As always Sheila, when I have a problem or question, I come to you. This time I have a question about the 2/0 blade. Because the blade is not very rigid, I have a very difficult time putting into the bottom blade holder of my Excalibur. How do you do it? The other day it took 11 tries to get it into the holder. I don't have problems with larger blades.
+oldman719 I attach the top of the blade first, and then it kind of falls into place and it is much easier to guide it into the bottom holder. Once the bottom is tightened, you can then re-tighten the top of the blade in the top holder and then set the tension. This is how I do it, as I also find it difficult to set properly in the bottom holder. I hope this helps you. :)
We have a variety of tutorials and articles on our website for free. I think they will help you decide. Thank you for your kind words. :) www.sheilalandrydesigns.com/free-pattern
great job .. pls can u mention some web pages that i can get some free pattrens from it .. and if you have some pattrens you can share it for us . thanks
+tayf baghdady Well - since selling patterns is my living, of course I would like to direct you to my own site, http:www.sheilalandrydesigns.com. On it we have a free pattern, as well as articles, videos and loads of patterns. All patterns can be sent PDF which saves on shipping and gets you started fast. We also ship paper patterns for the same price plus postage. Besides us, you can inquire at some of the woodworking forums. Some people love to offer free patterns as a hobby. Some of them are wonderful but many are not optimal for new cutters, as they can be difficult to cut 'as is'. You need to know where to adjust them so pieces don't fall out. Thanks for your nice comment. :)
Hi Sheila, I just love your videos and I am very surprised how little pressure you seem to use to hold your work down. Could it be due to the type of blade, wood or machine you are using or am I mistaken. I use a Hegner Multicut 2SV.
You really don't need a lot of pressure with a small blade and thinner pieces of wood. I suppose a loose idea would be that the bigger the blade and the thicker the wood, the more pressure will be needed to keep it from "chattering" (or catching on the blade as it moves up and down.) Usually, if one has 'chatter' I suggest either decreasing the size of the blade, if possible or speeding up the saw. Chatter also occurs when the saw speed is too slow and the teeth of the blade have a chance to 'grab' the wood instead of cutting through it. It is scary when this happens to new sawyers and can startle you. But increasing the speed of the saw helps pull the blade through the wood faster and it is less likely to catch if you have the proper size blade for the thickness of the wood. There are no set and fast rules for blade size and speed in regard to thickness or type of wood. This comes with experience. You can have two pieces of wood (say, maple) and one can be much harder or denser than the other and react differently when cutting. But you do kind of get to know the general requirements as you do more cutting and it is easy to adjust as you go along. I hope this helps you a bit. Thank you for your kind comments. I appreciate them a great deal. :)
Hi Sheila what kerf is that blade? In millimetres please? 🤔
I don't know, Tim. I never measured.
I appreciate these videos on scrolling. Thank you
What is a negative design
Hi, Yvonne: A "Negative" design is a design where the focus of the picture is removed from the piece, as the one that I am using in this video. The images of the butterfly and plant are depicted by voids in the background. A "Positive" design would be done by removing the background area and leaving the focus parts (such as the butterfly and plants) as the picture. I hope that clarifies. :)
@@SheilaLandry thank you so much for explaining this to me.
Hi Sheila:
You are the first scroller I've seen that uses the blade to pop out the cut-outs. I started doing that and it works great.
Thank you for your demonstrations.
Chuck
I am glad it was useful. :) Thank you so much.
Ive just been watching this video with my wife. This just shows the difference between men and women. I said, look at the scroll saw skill this women has. My wife said, sod that look at her nails, their lovely..... Ive only just stopped laughing. Great video.
LOL, Chris! Yes - you don't have to have short nails to do woodworking. I just don't muss with mine very much. Trick is to keep your fingers far enough away from the blade so you don't nick the end off. (Yes - I have done that!) I often assimilate scroll sawing to using a sewing machine. You know where the needle is and you don't shove your finger in there. Same with the scroll saw blade. You just "know" your limits and there are very few injuries really. :) Glad you liked the video.
Thank you, thank you, thank you Sheila!!!!!🥇🏅🏆🏆🏆🏆🌹
You are welcome. :)
Why thank you very much! This one came out a little longer than I expected because it is a compilation of short takes. But I do think that you can see everything clearly and hopefully I got the points across. Thanks for the comment! :)
Sheila Felicitaciones, tienes unas manos maravillosas !! yo recién estoy empezando a cortar y tardo mucho, no sé si la diferencia está en tu máquina de mayor potencia, o usas maderas mas blanda, o es cuestión de habilidad y nada más.
Un saludo desde Argentina.
Alicia.
I'm new to Scroll Saw work and don't find blades using the same reference numbers. Where do you get your blades? Menard's is my only source where I live and you can point me in the right direction! Thank you very much 😊!!!
Thank you, Dave:
I use Olson Scroll Saw Blades and get them from The Wooden Teddy Bear online. They have the best prices and you can mix and match sizes for the best discounts. Here is the link to them: woodenteddybear.com/collections/blades/olson-scroll-saw-blades?sort_by=title-ascending
I hope it helps. :) Sheila
Gracias Alicia. Espero que encuentre que le gusta desplazarse tanto como yo. Con un poco de práctica, usted será un experto antes de que te des cuenta! Gracias por las amables palabras. Sheila :)
Sorry it took so long to respond to this. Thank you so much for your nice comment. :) Sheila
Great series thanks for sharing.
You are very welcome. :)
As always Sheila, when I have a problem or question, I come to you. This time I have a question about the 2/0 blade. Because the blade is not very rigid, I have a very difficult time putting into the bottom blade holder of my Excalibur. How do you do it? The other day it took 11 tries to get it into the holder. I don't have problems with larger blades.
+oldman719 I attach the top of the blade first, and then it kind of falls into place and it is much easier to guide it into the bottom holder. Once the bottom is tightened, you can then re-tighten the top of the blade in the top holder and then set the tension. This is how I do it, as I also find it difficult to set properly in the bottom holder. I hope this helps you. :)
Hi, great job, could you describe the type of blade used it, not me of the model, as you write from Venezuela and suddenly is not achieved. Thanks
Wilfredo Yusti I am sorry, I don't understand your question. :(
very life like and so professional.
Stretch.
you are an artist...thank you so much....I have no idea about this art...but your lessons made me think about getting into that...
would it be easy ?
We have a variety of tutorials and articles on our website for free. I think they will help you decide. Thank you for your kind words. :) www.sheilalandrydesigns.com/free-pattern
great job .. pls can u mention some web pages that i can get some free pattrens from it .. and if you have some pattrens you can share it for us . thanks
+tayf baghdady Well - since selling patterns is my living, of course I would like to direct you to my own site, http:www.sheilalandrydesigns.com. On it we have a free pattern, as well as articles, videos and loads of patterns. All patterns can be sent PDF which saves on shipping and gets you started fast. We also ship paper patterns for the same price plus postage. Besides us, you can inquire at some of the woodworking forums. Some people love to offer free patterns as a hobby. Some of them are wonderful but many are not optimal for new cutters, as they can be difficult to cut 'as is'. You need to know where to adjust them so pieces don't fall out. Thanks for your nice comment. :)
Hi Sheila, very nice tutorial!
Lol if I can find the right hole.
Hi Sheila, I just love your videos and I am very surprised how little pressure you seem to use to hold your work down. Could it be due to the type of blade, wood or machine you are using or am I mistaken. I use a Hegner Multicut 2SV.
You really don't need a lot of pressure with a small blade and thinner pieces of wood. I suppose a loose idea would be that the bigger the blade and the thicker the wood, the more pressure will be needed to keep it from "chattering" (or catching on the blade as it moves up and down.) Usually, if one has 'chatter' I suggest either decreasing the size of the blade, if possible or speeding up the saw. Chatter also occurs when the saw speed is too slow and the teeth of the blade have a chance to 'grab' the wood instead of cutting through it. It is scary when this happens to new sawyers and can startle you. But increasing the speed of the saw helps pull the blade through the wood faster and it is less likely to catch if you have the proper size blade for the thickness of the wood. There are no set and fast rules for blade size and speed in regard to thickness or type of wood. This comes with experience. You can have two pieces of wood (say, maple) and one can be much harder or denser than the other and react differently when cutting. But you do kind of get to know the general requirements as you do more cutting and it is easy to adjust as you go along. I hope this helps you a bit. Thank you for your kind comments. I appreciate them a great deal. :)
Thank you, I will experiment with what you have advised. Thanks again.
You are very welcome. :)
Hi
What machine do you use?
The 21" Excalibur scroll saw. :)