Thankyou, very helpful. These appear/look thicker less flimsy than the OEM ones. Maybe I'm mistaken but I've watched installs of both brands/types. Anyone else notice a difference in the thickness between the two?
I live in northern Minnesota: could I caulk or RTV the seams so dirt/snow/ice and gravel don’t get pushed inside and stuck between the liner and the wheel well?
How tight for the two bolts that went into the clips? Without much torque it seemed to really start folding in my rubber washer. Also worried I don't have them tight enough.
These cost more than what Ford wants for “installing” OEM flaps with my new Lariat. Are the Husky’s better quality or something? OEM are $200 Canadian installed with the purchase of my truck
Shop these Husky Liners Wheel Well Guards! : amtrucks.at/3IpnqMj
Easy as pie. Video helps a lot. Took 5-7 minutes/side. Thanks
Glad it helped! Thanks for watching! -Zach
Thank you for such an easy-to-understand video... very helpul and made installation a breeze!
Need a video on replacing the front
You can get factory supplied liners if you order your truck.
Sure! But if you didn't get them from the dealer, these are a great option. -Zach
Thankyou, very helpful. These appear/look thicker less flimsy than the OEM ones. Maybe I'm mistaken but I've watched installs of both brands/types. Anyone else notice a difference in the thickness between the two?
I live in northern Minnesota: could I caulk or RTV the seams so dirt/snow/ice and gravel don’t get pushed inside and stuck between the liner and the wheel well?
Just got mine. The driver side one was easy. But the passenger side one was hard a bit to tuck it in. Overall they are great 👍🏽
Thanks for watching! -Zach
How tight for the two bolts that went into the clips? Without much torque it seemed to really start folding in my rubber washer. Also worried I don't have them tight enough.
These cost more than what Ford wants for “installing” OEM flaps with my new Lariat. Are the Husky’s better quality or something? OEM are $200 Canadian installed with the purchase of my truck
Does anyone know if there will be any conflict between these liners and Gatorback mud flaps on said vehicle?
Can these be used with mud flaps in place?
what about if you have mud flaps on the back
No mud flaps to consider?
will these fit a 6.5 ft bed?
They will fit any bed, just need trimming on the Raptor truck.
the jclip bolts are also 10mm like the rear wheel well bolt?
Yes, both are 10mm.
2022 Raptor requires trimming. Also might consider a plastic wedge to pop these into the top of the wheel well. they dont just “pop right in”
Says excludes the raptor 🤡
Ford F150s are Aluminum and won’t rust.
Agreed that the body will not rust. However, galvanic corrosion is always a possibility when mixing dissimilar metals.
I have two F150's and even though the body is aluminum there are plenty of parts that rust.
Won't work if you have the factory ford molded mudflaps on.
I got mine for $80 at the dealer
Great deal, listed for $200
I cannot believe how HORRIBLY these fit. I had to drill out several holes to get alignment. Would not recommend.
No issues for my 2021 F150 other than I'm tempted to slightly trim a few mm off of part of the lip that keeps popping back out.
No issues here either. 2021
@@HaleFire7 I take back my previous statement. When I got to the drivers side it was in the way of the leaf spring and shocks. Needs adjustment