I just finished assembly of the breadboard LED circuit. I followed the steps carefully, but nothing happened. THEN I rechecked your video and realized I had not connected all 8 transistor bases to the main base of BC547. The thing lit right up on power up after that. Now, I am going to transfer this whole project over to a PC board and make it permanent so I may use it for my music show! Thanks for a great design and idea. By the way, I had no 100nano F cap so I used an 82nano F, and had no 22ohm resistors, so I substituted them for 100ohm. Still works without a hitch.
I bought the transistors and own resistors and wired it to a board and followed ever step and nothing lights up unless I take the mic out and replace with wires (short the mic)
I think this is great. As a musician, I am going to use this idea to light up my solo show with my singing and guitar. My show depends on traveling lite and compact. Perfect to add for excitement. I will let you know when I finish the breadboard how it goes, then I will transfer that to a permanent board!
YOU MY MAN, ARE A GIFT!! A special thanks to you removing background music while you insruct. Others CRANK music that we all may not want. That becomes distracting.👍🙏
Thanx....Maine ye project kl banaya aur isne ache se work bhi Kiya......thank you Agar aap ardino se kuch project banaye toh bohot accha hoga hamre liye
Dude, you helped me soooo much. It worked excellent! The only thing i couldnt get was the 100nF capacitor but i used a similar one and it worked just fine. And i used 2N4001 Transistors, if youre using a different Transistor make sure you know the pin configuration cause some of them are different, the first time i couldnt get the circuit done because i didnt check that.
@@shresthgaming9318 It's the emitter, collector and base of a transistor, simply google the number of the transistor you have + pin configuration. You might have to switch some connections depending on what kind of transistor you bought.
Hi! By my understanding the 1M resistor is used along the capacitor to form a high pass filter, however, if I design to have a cut-off frecuency of 20Hz, this resistor is 80K. Do you think it would mess up the whole thing if a switch the 1M resistor with a 80K one?
@@varsha.m7053 please check the transistor connections but please check all the connections are connected perfectly as said in video i did exactly same as in video it worked perfectly for me before 4 years ago all the best for you!! It will definitely work I assure if you follow the video exactly
Thanks a trillion for this wonderful project idea👍👌 I did it for my college project n my sir loved it .......in end it dint worked according to the music what may be the reason ? Microphone issue ?
Very nice video . Thanks to you I undurstand a lot more of what is needed for my project . 40 leds red green ( christmas 😄) But i wonder can I use same transistors and capacitator with 5 volts input ??
Thanks for explaining it clearly.please help me .... what are the components need to drive 18watt submersible pump on music please reply or make a video.....
I have connected all just like from the video but when i put the 9v battery it just light up and it didn't stop or even beat with the sound its just a steady light like a basic led circuit
I tried doing the project, the LEDs are working but the microphone isn't working..I used the same microphone as it is used in the vedio...is it the fault of microphone or something else.. please help out..
Please check the circuit step by step.. Install we have tested the circuit for 2 transistors and then we completed the whole ckt so check it step by step it will definitely work..
Out of 8 LEDs only 3 are working properly with music rhythm. I've also checked the connection from the transistor but the fourth LED and other LEDs are not still working. How can I solve this? I'm doing this for my school project. please reply sir.
If the 1st three LEDs are working properly then there might be a problem in the 4 transistor it might be not working properly. So i would suggest you to please change the 4 transistor and try once....
Hi . Thanks for the clear steps and explanation .. I tried to make the circuit following the video but the leds flash from almost nothing even the breath of air not like yours .. I don't know the reason and how can I solve it ??
please help!!!!! it doesn't work on the normal sounds or at least the mobile sounds it needs loud speaker how can i fix it to be flixable with also the normal sounds ? i've just working on the project of my college .
thank you so much for the video Manthan. why won't this work with (PN2222 )transistor ?? I read the data sheet but not making sense. I apologize if this a dumb question ;/
You might need to build another ckt for connecting aux to this circuit you might need to do some research for it.. Definitely there will be a solution for it....
Hello sir, LEDs are glowing if I use electret mic (pin type) or not. How can I solve that problem. LEDs not blink cuz of pin type mic???please answer Sir
Can i add pic (microship) to the circuit and do a program to make for exemple 4 leds turn on and others turn off in the same time while the music is playing, and other question when i relate the microphone to a pin of the pic ofcourse it should be analog converter pin but should i do any changes or the pic will take as digital into it for exemple when the music turns on the input takes 1 from the microphone and the transistors with the leds will be relate each one to his propre pin should turn on and off depending on the music
Yes u can do it.but, u don't need to use PIC Microcontroller's as it is a very easy circuit and u can inverse the output by adding another transistor in the ckt to get 4 LED's turn on and 4 LED's turn off. And for the next question u should try it because I haven't used a PIC. Thanks for taking interest into it.
Yes, u can use 2 LED lights in series and if u r going to use more LED's u should try a 12 volt battery for more battery life and good performance of the circuit
Hi MAK's! I made this circuit and i designed a pcb board with a beautifull design with 2 Vacuum Tube... led controlled... but i have a little problem.. if I clap my hand led flash for a part of a second... and the circuit are not sensitive for music. The problem it. s the microphone sensibility? I need to mention a few changes.. like... I use 2N2222 NPN hfe 200 transistor... I think it. s not a problem.. because transistor working like a switch... and the principal driving amplifier transistor a BC546B transitor... the 1M resistor replaced with 100k.. led series resitor 200 ohm for 5v power circuit it. s enought... And the reistor in series with microphone changed to 1k.... The circuit working... but not verry well like you... Why.? I don. t know... I suppose the problem is the sensibility of the microphone... If I breathe in the microphone... led flash.. How can you think I solve this? If I solve the problem I will give you my schematic pcb layout. Have a good night
Yeah the problem is with the microphone bcoz that's it which drives the circuit to switch on the LED. So change the microphone I will also recommended u to use a high ohm resistor's so that they will enable the circuit only when there is a clear sound. That's all thanks for u help though.
Thank you for your answer MAK's ... that's what I thought ..the microphone.... do we make a gift to all those who want to do this but with two LEDs? I put the PCB card the way it once promised you in gratitude for the answer and once for those passionate about the electronics I expect your opinion about the PCB. I will change the microphone as soon as I can... link project -> pcb and photo -> drive.google.com/open?id=1ScDxVsqECRpdjcZKVcN2SC4REk7u5d9M All the best from Romania .
Well it can be a also bcoz of vacuum tube's LED as they are multiple no. of them. Sry, but I am not able to open the file can u mail it to me. Also u need any suggestions for some finishing touches to the gift I can help u with it. Email me at :- abhishekdesai1239@gmail.com. Thanks for sharing your thoughts.
I solved the problem ... I bought a new electret microphone not condenser as first .. and for 7 v input from old 9v batery i used in series with leds 10 ohm resistor , not 1k ... circuit works fine and it is verry sensitive to soud ...especially at bass. If someone need help , ask me. All the best from Romania .
Bro I have tried all possible ways ,I have changed battery ,I have tried 12v battery . When I connect 12 v battery the rest 3 LEDs are working but without music and other 2 are not working even on music rethem. There is possible that microphone is not working properly?
U just re connect the whole circuit may be the connection are wrong or you would have used a different type components by mistake or check the polarities of the transistor or the mic
The LED's won't blink faster like the circuit so used the preferred one so that u can get the same output but for testing purposes u can do it output will be there
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
I just finished assembly of the breadboard LED circuit. I followed the steps carefully, but nothing happened. THEN I rechecked your video and realized I had not connected all 8 transistor bases to the main base of BC547. The thing lit right up on power up after that. Now, I am going to transfer this whole project over to a PC board and make it permanent so I may use it for my music show! Thanks for a great design and idea. By the way, I had no 100nano F cap so I used an 82nano F, and had no 22ohm resistors, so I substituted them for 100ohm. Still works without a hitch.
Well thanks for your interest in my videos.
We cn use one rgb led strip and it is amazing..only one transistor is needed
I bought the transistors and own resistors and wired it to a board and followed ever step and nothing lights up unless I take the mic out and replace with wires (short the mic)
@@zeenzeen5394 can you tell me the rgb strip connection
How many volt capacitor are used
I think this is great. As a musician, I am going to use this idea to light up my solo show with my singing and guitar. My show depends on traveling lite and compact. Perfect to add for excitement. I will let you know when I finish the breadboard how it goes, then I will transfer that to a permanent board!
Where can I buy tickets to your music show?
😂😂😂 at my place may be😁
a tip : watch movies on Kaldrostream. Been using them for watching all kinds of movies during the lockdown.
@Marcelo Maxton Yup, I have been using kaldrostream for months myself :)
How many volt capacitor are used
YOU MY MAN, ARE A GIFT!!
A special thanks to you removing background music while you insruct.
Others CRANK music that we all may not want. That becomes distracting.👍🙏
Thanks bro I saw each every video on yt to make it glow on beats but every time it didn't worked until I saw your video thanks bro for helping me ❤❤❤❤
I done ✅ my project and it's working .
Thanx
thank you soo much, from cd. juarez México!
tq bro for your great hard work we to used ur project to pass and it was good !!!!!!!!...
I am student of mechatronics and I want electronic project for weekend I think this is best and simple
Super thanks
I tried and it's working once again thanks bro
Your welcome bro
Thanx....Maine ye project kl banaya aur isne ache se work bhi Kiya......thank you
Agar aap ardino se kuch project banaye toh bohot accha hoga hamre liye
Okkh hum karenge PR app like aur subscribe karna na bhule. Thanks 😊
Resistors 22ohm ki jaga Kounsa laga sakte hain
I got the right hardware circuit. Your vdo helped me so much. Thanks a million Sir.
Dude it's working perfectly 🎉🎉🎉❤
Dude, you helped me soooo much. It worked excellent! The only thing i couldnt get was the 100nF capacitor but i used a similar one and it worked just fine. And i used 2N4001 Transistors, if youre using a different Transistor make sure you know the pin configuration cause some of them are different, the first time i couldnt get the circuit done because i didnt check that.
Similar capacitor value please
what does pin configuration means?
@@SAAD-nh1oe I used a 47nF capacitor, they are orange and have a 473 in the middle.
@@shresthgaming9318 It's the emitter, collector and base of a transistor, simply google the number of the transistor you have + pin configuration. You might have to switch some connections depending on what kind of transistor you bought.
@@carlosvalentin9670 i have BC574 as mentioned in video..will it work?
Hi! By my understanding the 1M resistor is used along the capacitor to form a high pass filter, however, if I design to have a cut-off frecuency of 20Hz, this resistor is 80K. Do you think it would mess up the whole thing if a switch the 1M resistor with a 80K one?
thank you i was looking for a video like this for a long time i wanted to put light in my car base box
Welcome 007Rickie
That's something to try at home man, superb video and it works totally correct. Keep uploading
+RAJU PANDEY ty brother
Thank u boss my project is working👌👌🔥🔥👌👌👌😎🎊🎊🎉🎉🎉🎉
But
Mera work ni kr rha
how bro
Please make sure that all connections are proper. Follow all the steps properly definitely it will work..
Really ur project is working?? Can you please help me as soon as i give the power supply leds are blinking without giving sound? Wt is the reason
@@varsha.m7053 please check the transistor connections but please check all the connections are connected perfectly as said in video i did exactly same as in video it worked perfectly for me before 4 years ago all the best for you!! It will definitely work I assure if you follow the video exactly
Thanks a trillion for this wonderful project idea👍👌 I did it for my college project n my sir loved it .......in end it dint worked according to the music what may be the reason ? Microphone issue ?
Help me out dude it isnt working
Very Well Explained and in a simple and Creative manner.!!
Looking forward for more such Content 💯
How to short the bases of the transistors
Thank you, now my project is done, kudos to you man!
How to short the bases of the transistors
How many volt capacitor are used
Very nice video .
Thanks to you I undurstand a lot more of what is needed for my project .
40 leds red green ( christmas 😄)
But i wonder can I use same transistors and capacitator with 5 volts input ??
Super... This my small project.. I choose it.... Very super project
this is co cool ! can anyone tell me how it work? please !!i need the detail for this project.thank you!!
Bro, it's lit.....literally🔥🔥🔥
Thanks for explaining it clearly.please help me .... what are the components need to drive 18watt submersible pump on music please reply or make a video.....
Yeah we will see to it
@@MAKs_electech I'm eagerly wating... make it fast as possible as...or mention the components please..
I love you I love you I stayed two hours but it was worth it💕💕💕🍻
Bhaiya na is a great place to work for men adi and voltmeter in the same way as the most wellcome of the day
Thank you - this is So cool! 😎 will need to make this
I have connected all just like from the video but when i put the 9v battery it just light up and it didn't stop or even beat with the sound its just a steady light like a basic led circuit
PLEASE GUIDE ABOUT ROLE OF EACH COMPONENT PLAYING IN THIS CIRCUIT AS I NEED IT FOR MY PROJECT
It's ok... I had done my project I got an output.. Thank you
Well that's superb
Interesant montaj cu leduri. 473.
Can I create the Ganpati dancing light using this concept ?
I tried doing the project, the LEDs are working but the microphone isn't working..I used the same microphone as it is used in the vedio...is it the fault of microphone or something else.. please help out..
Yes mee to help pls
nice job. just built the circuit. What would I do to adjust sensitivity? Maybe a pot somewhere?
Yeah, u can adjust the sensitivity by adding a pot after the mic. But it would slightly change the sensitivity not by a great margin
How did you get it to work?? My circuit hardly lights up when i bypass the microphone
I followed every step of yours. The connection is like yours, but as soon as I plug the source the LEDs light up. Do you have an explanation please?
Please check the circuit step by step..
Install we have tested the circuit for 2 transistors and then we completed the whole ckt so check it step by step it will definitely work..
Did you figure out why that happens??
I did it and the same problem happened to me
Superb video. Keep it up
+Abhishek Desai thanks. We will
Bro the project was excellent but could u show the same project without using bread board please..
Out of 8 LEDs only 3 are working properly with music rhythm. I've also checked the connection from the transistor but the fourth LED and other LEDs are not still working. How can I solve this?
I'm doing this for my school project. please reply sir.
If the 1st three LEDs are working properly then there might be a problem in the 4 transistor it might be not working properly. So i would suggest you to please change the 4 transistor and try once....
Hi .
Thanks for the clear steps and explanation ..
I tried to make the circuit following the video but the leds flash from almost nothing even the breath of air not like yours .. I don't know the reason and how can I solve it ??
Try a smaller mic, or a less sensitive one
Or maybe leds with a higher limit
Actually in this video u used a 2pin mic but I have 3 pin microphone is it useful to make that circuit sir
What is the future scope of this project plz help...?
Amazing video!! but, what i must to change if i want to use a source of 12v?
Oo wow amazing loved it... I'm working on a mini project plss suggest me a innovative simple mini project plss
Mobile Detector Circuit, Led Chaser Circuit, Digital Dice...
Can we use disco leds ??
why is my led always on "on" state ? and doesn't response according to music ??
what should i change to use a 12 volt leds at each transistor ??
Can we use 100 micro farad instad of 100 nano farad
what is the application for this project pls tell me bro
Its Really Good
+Anuj Jaiswal thank you !!!!
It's awesome 👌👌👌👌👌
Sir, will it run on 3.7V ??
I have question about this my led lights working directly could you plzz help me out
please help!!!!!
it doesn't work on the normal sounds or at least the mobile sounds it needs loud speaker how can i fix it to be flixable with also the normal sounds ?
i've just working on the project of my college .
Can we make this without using 1M resistor
100nF means 104 pF (Choose capacitor with 104 Written on it)
its lit bro, thanks for the idea
what are my adjustments if I use 20 LED's? does it need to change the resistors also?
Kindly explain the phenomenon upon which it is working(circuit explanation theoratically)
Can I put 4 or 5 led lights in a series with 1transistor??
I have not tried. I will try it
What principle was used in this project..???
hello.cathode of LED connect to Collector of transistor(middle lead)?
I am a school student sir.. How much does it costs for making it sir
Good video. Can you use led strip with this circuit?
May I ask? We have the same components, but why does mine not fully off when the music is playing?
Only the intensity of the light flicker
Bro I have mic with only pins instead of wires can I use it ?
Can I use 2n3906 transistor?
Circuit is working but in reverse, that is when volume increase the led brightness decrease, please tell me what's the issue brother.
Which science can use in this project ???
Electronics/electrical engineering
thank you so much for the video Manthan.
why won't this work with (PN2222 )transistor ??
I read the data sheet but not making sense.
I apologize if this a dumb question ;/
It is working please check with the connections there might be some problem with the connections I guarantee it will work...
Can I use 100 k resistor instead of 22 ohm resistor?????
Brother 12v ok or no??????
Please add circuit diagram also
I tried doind it yesterday but with music the led are still ...is it microphone probelm?if yes then which type of microphone to be used.
l have same problem
nice video.i am your new friend 527. support new creators.keep in touch. all the best.
Hi MAK's. I like this Video. I wante to make this project. But I wante to use aux cable. How can I use it? Please help me
You might need to build another ckt for connecting aux to this circuit you might need to do some research for it..
Definitely there will be a solution for it....
Hello sir, LEDs are glowing if I use electret mic (pin type) or not. How can I solve that problem. LEDs not blink cuz of pin type mic???please answer Sir
Music Name please??
Its a nice video
Thanks😊
Can i add pic (microship) to the circuit and do a program to make for exemple 4 leds turn on and others turn off in the same time while the music is playing, and other question when i relate the microphone to a pin of the pic ofcourse it should be analog converter pin but should i do any changes or the pic will take as digital into it for exemple when the music turns on the input takes 1 from the microphone and the transistors with the leds will be relate each one to his propre pin should turn on and off depending on the music
Yes u can do it.but, u don't need to use PIC Microcontroller's as it is a very easy circuit and u can inverse the output by adding another transistor in the ckt to get 4 LED's turn on and 4 LED's turn off. And for the next question u should try it because I haven't used a PIC. Thanks for taking interest into it.
MAK's thank u so much, i know that this project doesnt need pic but my doctor forced us to use pic in our project
I can try, if I can get hands on PIC.😁😁
Can i get aim of the experiment and procedure and use and results
Does it automtically go according to the music
It will be work?if we can give voice as input
Yes, but if your voice is loud
Ok thank you
Your, welcome
Can i use 12v battery
Yes, u can
Can I use 10 led in the same schematic? I'll just extend it?
Yes the number u want to😁
Same 9V source?
Can I put 2 led lights in a series with 1 transistor?
Yes, u can use 2 LED lights in series and if u r going to use more LED's u should try a 12 volt battery for more battery life and good performance of the circuit
Hi MAK's! I made this circuit and i designed a pcb board with a beautifull design with 2 Vacuum Tube... led controlled... but i have a little problem.. if I clap my hand led flash for a part of a second... and the circuit are not sensitive for music. The problem it. s the microphone sensibility? I need to mention a few changes.. like... I use 2N2222 NPN hfe 200 transistor... I think it. s not a problem.. because transistor working like a switch... and the principal driving amplifier transistor a BC546B transitor... the 1M resistor replaced with 100k.. led series resitor 200 ohm for 5v power circuit it. s enought... And the reistor in series with microphone changed to 1k.... The circuit working... but not verry well like you... Why.? I don. t know... I suppose the problem is the sensibility of the microphone... If I breathe in the microphone... led flash.. How can you think I solve this? If I solve the problem I will give you my schematic pcb layout. Have a good night
Yeah the problem is with the microphone bcoz that's it which drives the circuit to switch on the LED. So change the microphone I will also recommended u to use a high ohm resistor's so that they will enable the circuit only when there is a clear sound. That's all thanks for u help though.
Thank you for your answer MAK's ... that's what I thought ..the microphone.... do we make a gift to all those who want to do this but with two LEDs? I put the PCB card the way it once promised you in gratitude for the answer and once for those passionate about the electronics
I expect your opinion about the PCB. I will change the microphone as soon as I can...
link project -> pcb and photo -> drive.google.com/open?id=1ScDxVsqECRpdjcZKVcN2SC4REk7u5d9M
All the best from Romania .
Well it can be a also bcoz of vacuum tube's LED as they are multiple no. of them. Sry, but I am not able to open the file can u mail it to me.
Also u need any suggestions for some finishing touches to the gift I can help u with it.
Email me at :- abhishekdesai1239@gmail.com.
Thanks for sharing your thoughts.
you need to download the file ... it is not possible open it in google drive. I will send the file to you on email :)
I solved the problem ... I bought a new electret microphone not condenser as first .. and for 7 v input from old 9v batery i used in series with leds 10 ohm resistor , not 1k ... circuit works fine and it is verry sensitive to soud ...especially at bass. If someone need help , ask me. All the best from Romania .
I have checked it three times
Pls 🙏 sir help me in this project... 100 nf capacitor ne. Badle 100 microfarad use thai???
I have connected everything as shown in ur vedio i followed ur all step the leds are just lighting but they are not blinking when i play music why??
Can you tell me please what music to use. Send link of music video...
I just finished assembly of circuit but when I play music the light didn't react
Ok bro thanks 👍and keep it up
Is it working right now???
Bro I have tried all possible ways ,I have changed battery ,I have tried 12v battery . When I connect 12 v battery the rest 3 LEDs are working but without music and other 2 are not working even on music rethem. There is possible that microphone is not working properly?
U just re connect the whole circuit may be the connection are wrong or you would have used a different type components by mistake or check the polarities of the transistor or the mic
Most probably there can be the problem of mic bro plz check the positive and negative of small condenser mic....
Out of 5 LEDs only 2 are working on music rethem but this 2 are dim . So how can I solve this problem
Bro it must be the problem of ur battery check the battery and also check the connection from that transistor.....
If i'm using led strip would it still work?
Yes bro but the amplifier should be of higher value to drive all the LEDs
MAK's owh... Oke... Thank you very much for your reply. I am really appreciate it 👍
It is wireless or not in music
can you do it with PIC?
Yes!!!
According to main transistor circuit how it's works
The main transistor is the amplifiers of sound where all the others are used just to drive the LEDs
Want to buy this project urgently
What if i use a high value capacitor like 470 microfarad
The LED's won't blink faster like the circuit so used the preferred one so that u can get the same output but for testing purposes u can do it output will be there
Can we use sound sensors instead of microphone