DIY Crossbow - How To Make Super Powerful Crossbow
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- DIY Crossbow - How To Make Super Powerful Crossbow #woodworkingstudio #Crossbow #diy #Woodencrossbow
Crossbow Crafting InstructionsCrossbow Crafting Instructions
How to make a crossbow
Crossbow
DIY Crossbow
Powerful hunting crossbow
►Thank you for visiting my TH-cam channel!
►Help me subscribe to the channel:
Very interesting! The rubber will last much longer this way, not stretching over the pulley.
It would be interesting to see this concept modified into a reverse draw design, so you could get a much longer power-stroke.
Very cool build!
Thanks
This is a weirdly shaped slingshot, and nothing like a crossbow!
Awful placement for those elastics. Any failure on the forward position of your crossbow and those elastics are going full force into your face. That being said, if the part of your face hit is your eye, you can kiss that eyeball goodbye punta
Thank you for watching the video
It looks very cool, but first of all it isn't a bow though, it's a slingshot. A very strong one regardless. But i think it could've been much more practical with a few improvements, nice build though!
Thank you for visiting my youtube channel
What improvements did you have in mind? I made one similar after I saw this and it doesn’t seem like the limbs are beneficial, but more just add visuals as a plus, but weight and unwieldy bulk as a negative. I’m trying to build a better one, maybe you have some good ideas that I could take into consideration.
@@rickymortinson1918 I agree the build looks very cool visually, but its probably weighing more than it should, and probably less ergonomic. If you ask me, honestly wrist rockets are the best slingshots; easier to reload and very light but powerful. It will get the same job done. Improvements on this slingshot-crossbow though:
A different material for the grip, most probably leather.
Removing the part where it connects with the stock and grip will make it more ergonomic and easier to handle. If you ask me there is not a reason at all to have a butt, this slingshot is not powerful enough to give you recoil. But again, it makes it easier for you to reload the weapon as seen in 14:35. It is a matter of choice.
The part where limbs connect with the body seems overcomplicated, if you could work with steel you could come up with something way more lighter and visually less clustered.
This bow has a reverse draw design but it doesnt really use it. I'm no expert at how a slingshot could be used with reverse-draw but this definitely isn't the one. ZNA Productions commented on this video that it could be modified into a reverse draw design, this channel was the first time i got into making bows with PVC. So I'll agree with that. The point of reverse draw crossbows are that you could get a more powerful power stroke. It means longer limbs without actually making the crossbow longer and heavier. But again, i don't know how it could be enforced with slingshots. I guess this is all i could say, good luck.
бревно-мишень видимо из пенопласта...
Thank you for watching the video
Yapmak isteyenler için detaylı açıklama varmı...cevap,yok . Defolun...
Thanks
Crap when compared to a legit crossbow . Why use RUBBER ? wtf is that about
Молодец конечно, все красиво, но это херня а не арбалет
標的
二宮和也
佐々木希
道枝駿佑
谷花音
Thanks
“O legado é o seu trabalho cristalizado. Se deixar um, estará sempre vivo e inspirando quem vem depois.”🍷🗿
Impossible! It cant penetrate a log! Can it?
Thank you for watching the video
I do not see the practicality of the "limbs". The only obvious functioning part, is the bungee chord. That's all.
Thanks
Ora, faz uma sem madeira sem NADA so com a corda e mostra pra gente.😂😂😂😂😂.
E o teu nome é esse mesmo ?? Azar ... nossa...
I think the purpose of them here is to allow the string to come to a horizontal rest. They aren't flexing to give any extra inertia but rather provide a safe stopping point for the string.
Thats because there is none 😂 but i have seen a lot of these crossbows and this is one of the nicest because of the design ,so it wasnt for nothing
very nice design, it would be more powerful if the powerstroke is longer.
Thanks
THIS IS A FOOKING SLINGSHOT!
Thanks
как только глянул на первый кадр сразу возник вопрос,как сильно прилетит по уху,если оборвётся одно плечо?
Thanks
Just laughter. At best, this wunderwaffle will break through a piece of boiled sausage. It was possible to organize the entire system along the bar, without these shoulders, which are here only for beauty and in fact do not increase, but shorten the travel of the rubber, and besides, they make the weapon huge
Thanks
Fake video, insinuating that the arrow actually penetrates that wooden log, which is pure bullshit. Rather short drawlength as well, compared to real very powerful modern crossbows.
Thanks
这个这个弩,箭在弩的尾部受力了。双臂弩,箭在弩水平于出口处受力。你这个弩在尾部受力威力更少吧?
In this crossbow, the arrow is stressed at the tail of the crossbow. For a two-arm crossbow, the arrow receives force at the level of the crossbow and at the exit. Does your crossbow have less force at the tail?
Thank you for watching the video
Две ресоры?
Это лучше шарика. Дал по башику. И отдыхает минут 40.👀
Thank you for watching the video
How much ?
Thanks
На резинках это хрень, надо делать настоящие дуги, рессоры или композит, и тогда будет супер, а это хрень хренью!
Thanks
Bro!
I watched your video and I was shocked! You are a genius! I'm amazed, I can't believe it... You have golden hands. If you don't mind, can you send me a drawing with dimensions, I'll try to do it myself because... There is no financial opportunity to order and customs does not allow such things, they consider them like weapons. I will be glad to communicate with you.
Best regards, Lev.
I used the hand-drawn version but unfortunately it is no longer available, I hope you understand
А для чего нужна столько не нужные вещи?
Do not underestimate a crossbow! Not only does it fire something far heavier than any bullet well if we're talking about weapons a human can fire from the shoulder then yes, but. It does that with virtually no noise at all!
Even thee quietest of firearms are still louder than crossbows and especially bows and will tear through most soft body armours like it was nothing. They maybe "basic and primitive" but that doesn't knock their effectiveness at all.
Thank you for watching the video
@@WoodworkingStudio Your welcome buddy, maybe one day I'll have a go at making one although, I'd probably use Damascus steel lightweight to construct the body and mill it out. Maybe so I can have steel wire and a ridiculous leaf spring be used to propell the bolt. But great video throughly enjoyed it 🙂
hi, which wood are you using for your masterpieces?
How can I get a blue print from you? I didn't see any measurements in the video.
Thanks
Book hoga kya
Thanks
The reason for the limbs is to add the ability for the rubbers to stretch to a harder degree allowing for that extra push that gave the arrow the ability to actually blow through the entire log.
Thank you for watching the video
Cool looking slingshot. But very big. Nevertheless - good design and great work!
Thank you very much
Wow
Can you share me the drawing for example. ? Thanks you so much..
I use hand-drawn drawings, unfortunately no longer available, hope you understand
Reitero mí admiración por el diseño de este bello trabajo de carpintería especializada en un arma deportiva.
Thanks
Yes. A beautiful symmetry of Artistry and functionality.. and backpack ready😊
If you turned the limbs around your “bowstring” would have a longer distance to travel and give you more power with your shots
Thank you for watching the video,
Hi, how are you? I would appreciate it if you could explain more what you wrote here, by the way, can you guess the measurements from watching the video?
Whats the draw weight and feet per second of bolt?
Thank you for watching the video, I didn't measure it, but I think it's okay
Bro please give us the construction plan body of crrosbow
Thanks
See that's what I was saying why not mitigate the risk of having unnecessary pieces and just design a prob that doesn't look as fancy but it's more more powerful
Thanks
Why no infos? 😔
which sort of rubberband is used?? template for the baseparts???
Thank you for watching the video, the 1 cm large elastic band is very elastic, sold a lot online
Hi
Nice work. With a slightly different arrangement, with more pulleys, a much larger powerstroke would be available...
Thank you, great idea!
In all reality, the whole wing design is not necessary to give you same power strokes from the rubbers. Without the wings and pulley's you will actually have just a little more power. In all.. a striking model, but lighter and more maneuverable if with a simple front t for the rubbers. The wood craft is exquisite!
Thanks
im a luthier so I also work with wood...and you're very clever bru and it looks so cool too, very nice work 👍
Thanks
if I was going to make one I would have gone for reverse draw crossbow....
Thank you for watching the video
@@WoodworkingStudio no problem...good job building your crossbow..
Its a powerful slingshot not really a crossbow,but great though. Nice tutorial.
Thanks
So, it is not metal tension, it works with rubber bands?
Thank you
Great work!What model of band saw you're using?
Thanks
Nice..may I know where did u get all the template..
Thanks
That’s a slingshot.
Thank you for watching the video
aweome. i make bows myself....but crosssbow...couldnt do that
Thanks
reverse the limbs for a longer powerstroke!
Thanks
Избыточная сложность и неррациональность 🙂👍
Thanks
It's amazing, You did very well. 🙂🙂
Thank you for visiting my youtube channel
This is a slingshot, but yeah, nice job.
Thank you for watching the video
Its a sling bow with pulleys.
Thanks
My compliments on really fine work
Thank you for watching the video
Un gran bel lavoro. Grande manualità. Complimenti.
Thank you for watching the video
Do you have the measurements of the wooden house?
Thank you for watching the video
Excelente trabalho manual, caprichado. PARABÉNS.
Thanks
@@WoodworkingStudio Can you try a beef bone? can the bone be broken?
Can buy this from you
Thanks
What wood you use?
Thank you
How much to make one. Cost of material
Thank you for watching the video, it cost 50 dollars to make
@Woodworking Studio do you make any to order and I'm in ysa
Xin giá sản phẩm
Thanks, mjh ko bán ạ
ติดตามคนแล้วชอบงานของคุณมาก
Thanks
Được
Thanks
Pode enviar o desenho o é pago
Obrigado por assistir o vídeo, infelizmente meu desenho não está mais disponível,
обалдеть!!! Можно заказать у тебя такой арбалет?
Thank you for watching the video
Muito original
Thanks
Best😊
Thanks
it's toy not crossbow
Thanks
Top....
Thanks
ameizingui
Thank you for watching the video
Plans?
Thanks
ฝีมือ
Thanks
Hy, milyen métere pontos!?
Thank you for visiting my youtube channel
👌
Thank you for watching the video
BRAVO 👏👏👏👏👏👍👌
Thanks
cool af
Thank you very much
что за дерево?
Thanks
@@WoodworkingStudio из какого дерева сие изготовлено?
Excellent work, has to be one of the best DIY crossbow ever.
Thank you for watching the video
what is the strength in ibs
Thank you for watching the video
@@WoodworkingStudioAre you an NPC?
@@gerald37334 he maybe “no speak English”
.....1.5lbs....1.7lbs!
А можно чертеж арбалета?
Thank you for watching the video, sorry I don't have the drawing
Хорошая работа
Un maestro excelente
Thank you for watching the video
This is amazing, super powerful crossbow
Thank you for visiting my youtube channel
👍👍👍