Just use Honda coolant. And don’t let your brake reservoir get below the low setting when bleeding. And use a clear hose so you don’t get brake fluid everywhere
@mistercohaagen my favorite coolant is called the low toxicity biodegradable coolant it's compatible with all other coolants and you can mix it to the ratio you want we'll make a big Improvement in your vehicle warm up times with the Dominator coolant boost. You can get those products right through my link and that would attach me to you in the future I could always be your Amsoil dealer and would be able to answer your questions about improving the performance and lifespan of your vehicles by choosing the right fluids👍 Eben Rockmaker 702-472-3614 New Video - th-cam.com/video/el0YnOpPNMo/w-d-xo.htmlsi=B-wBCrEHhDTkV3Yq linktr.ee/EbenRockmaker
@@dianasanta7587 that's because you can't mix the blue antifreeze (OEM) with another, and he just flush the radiator but there still antifreeze inside the engine. You only need to turn on the car with the Valve open to flush completely.
If it was my car I wouldn't turn it on without any water in it because you could starve the water pump and if you got a phone call or got distracted and forgot you could totally wreck your motor. I know it sounds funny but we get easily distracted these days. That distraction could be thousands ☕😃🎬
I think you should mix the coolant 50/50 because even though it's warm in Nevada the factory antifreeze has additives that prevent corrosion that your whole system that your not getting at 20%. As far as the Amzoil additives, I think snake oil. They have good oil but, everything else seems far fetched. The guy at the end saying his car is riding better, the fluid change isn't going to do that !!!
Amsoil is the first in synthetic in 1972 they are the make the first synthetic motor oil first synthetic transmission fluid and first synthetic gear lube. ♥️ AMSOIL Performance Tests: Read This Article - www.amsoil.com/performancetests.aspx?zo=5331179
I use Amsoil Signature 5w-20, PI, and Upper Cylinder lubricant. Their products are not snake oil. I didn't use their engine flush, rather ATS or Liqui Moly. My sister has a Fit and the concentrated detergent in PI has worked wonders on the built up gunk in her fuel system and combustion chamber. She is the type never to touch her car outside of an oil change, coolant top off, and air in the tires. Not all additives are junk.
I recommend the low toxicity biodegradable coolant that's my personal favorite I use that in all my vehicles because it's compatible with all other makes models and colors I also use the Amsoil Dominator coolant boost which you'll see next to that on the website when you use my link that will attach me to you so in the future I can answer all your questions about improving the performance and lifespan of your vehicles by choosing the right fluids as your independent Amsoil dealer😊☕️👍 www.amsoil.com/p/propylene-glycol-antifreeze-and-engine-coolant-ant/?zo=5331179 You also want to add the 6-month PC membership to cart that's going to give you the best value on the products you'll also have the free shipping at 100 bucks or more and the new promotion which is right here below. Promo: FREESHIP
Correct the block holds about a quart depending on the vehicle all you do is a couple draining fills run the heater core and that will get most of the coolant out. The most important thing is to continue to flush it until the fluid runs really clear once it's running super clear you're ready to put the good stuff in 🎬☕☕💯 This is my link if you ever have any questions always happy to talk with you appreciate you checking out my TH-cam community. When you use my link I would get the credit for your orders and in the future I could always talk with you because I would be your Amsoil dealer. Professional YouLubher: Eben Rockmaker Regency Gold Direct Jobber AMSOIL Specialist (Dealer#: 5331179) 702-472-3614 If you're New to AMSOIL I recommend the AMSOIL 6 Month PC Membership - www.amsoil.com/offers/pc/?zo=5331179
If you haven't got a socket set yet I recommend if you're going to be doing basic work you can get a Craftsman socket set on sale right now during the holidays or you can also get a lifetime warranty socket set from Harbor Freight however they are not very strong tools say you cannot pound on them with a hammer or use a air ratchet or use an impact gun because it will crack the metal because they are very very very cheap tools. If you're looking for something of real substance I recommend getting a used Snap-on set which is the best you can get pawn shop or on line. If you have any other questions feel free to give me a call Aaron☕
Is this a self bleeding cooling system? I have an 07 and need to do both of these flushes. Also for an occasional autocrosser would you recommend upgrading to dot4? I have factory brakes with performance pads and super sticky hankooks rn.
Yeah pretty much the Hondas are self bleeding sometimes you might want to squeeze the tubes and you'll see it burp the system a little bit but usually it's pretty easy. Yeah you can run the dog for race fluid it just has a higher boiling point and it's better for super autocross situations
This will give you all the products for your specific vehicle and the fluid capacities- Lookup For Your Vehicles - www.amsoil.com/guides.aspx?zo=5331179
Great question, yes you can order the products and when you use my link you will get the products at the very best value when you get them at your doorstep you can take them to a mechanic and have them installed or you can also hire a mobile mechanic and they can come to your work and install it the most important thing is to watch them do the service it's always good to make sure you see the fluid go in your vehicle👍 ✅ ✅ ✅ Save 25% On Next Fluid Order: www.amsoil.com/offers/pc/?zo=5331179 ❤️ 🇺🇸 ❤️ Your Professional YouLubher: Eben Rockmaker. Find The Right Fluids For My Vehicle - www.amsoil.com/guides/?zo=5331179
Yes, Yes most of all the Hondas are all exactly the same very simple to work on They all pretty much take the same oil filter that I'm aware of Everything is right here in the lookup guide If you have any questions on anything always happy to talk and when you use my link I would get the credit and I could always answer your questions in the future on the products. Professional YouLubher: Eben Rockmaker Regency Gold Direct Jobber AMSOIL Specialist (Dealer#: 5331179) 702-472-3614 If you're New to AMSOIL I recommend the AMSOIL 6 Month PC Membership - www.amsoil.com/offers/pc/?zo=5331179
Yes, You want to get everything here on the lookup guide It will give everything for your year make and model. Find AMSOIL Products For Any Vehicle - www.amsoil.com/guides/?zo=5331179
If you're new to Amsoil I recommend the 6-month PC membership will give you the very best value on the products if you have any questions let me know when you use my link I will be your go to Amsoil guy in the future and I'll get the credit for your orders which I appreciate the business future business in advance Thank you. ❤️ 🇺🇸 ❤️ Professional YouLubher: Eben Rockmaker Regency Platinum Direct Jobber AMSOIL Specialist (Dealer#: 5331179) 702-472-3614 ✅ ✅ ✅ You will get Best Value with 6 Month AMSOIL PC Membership because You get $33 back on a $100 purchase after the difference in Sales Tax with No need for Auto Renew - www.amsoil.com/offers/pc/?zo=5331179
Thanks for the question really appreciate it and we're doing the giveaway tomorrow at 11 a.m. Las Vegas time Saturday where we will be giving $100 gift card away. All you do is share the channel and send a screenshot of the share to me with your full name and I'll put you in the giveaway. #EbensGiveaway Eben Rockmaker Independent AMSOIL Specialist (Dealer#: 5331179) Mobile: (702) 472-3614 My link: AMSOIL 25% Less Wholesale & FREE SHIPPING: www.amsoil.com/offers/?zo=5331179
The motor oil bolt is 15 mm the front brake caliper is 10 mm. Basically, if you have a standard metric socket set with open-ended wrenches you're good..... Thanks for reaching out to me
It is the Amsoil PI performance improver cleans the valves injectors all the carbon deposits inside the combustion chamber www.amsoil.com/p/p-i-performance-improver-gasoline-additive-api/?zo=5331179
Are you on face book because it would be great if you could share my TH-cam Channel video on their tag me also send me a screenshot of your share and I will save you in the end of giveaway 702-472-3614
This is a hundred percent synthetic fuel efficient automatic transmission fluid it's a proprietary fluid. www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-fuel-efficient-synthetic-automatic-transmission-fluid/?code=ATLQT-EA?zo=5331179
When bleeding the brakes as assistant pushes and holds brake pedal down and you open the valve are you quickly opening and closing or is that little bit that spurts out all that’s in the line every brake push?
jdhrap when the assistant presses down the brake pedal it pressurizes the lines. Then the bleeder screw is opened any air or old fluid is expelled. The bleeder screw must be closed before the brake pedal is released or air will be sucked into the brake lines, this is very bad. Also as the fluid is bled out you must keep adding more fluid to the master cyclinder throughout the bleeding. He doesn't show this in the video.
@@slalomking if i want to change the brake lines upfront should i bleed the side im going to change all the way drained to take off and replace the line then do this method again to have fluid back in? Sorry first car
@@johnnyherrera7821 No you don't have to drain the removed back line. Remove it, then install the new one. Pump the brakes to fill the new line and bleed it at the disc caliper. Bleed it until it is air free. Since it is a new line, check the line where it attaches to the disc caliper and the upstream connection. Also you should bleed the opposite wheel just to make sure it is air free also. The front and rear brakes are split. You work on front you must do the two up front. Work on rear you should check the other side on the rear also.
@@slalomking thank you it was hard to find a brake line replacement video on my Fit so watched someone do it on a accord and was pretty much same process. Thanks again🙏
My dude put half the bottle into the coolant. Bottle says put 1 oz per quart. Lol [Grabs measuring cup] [Measures 5.6 oz] [Bottle says 5.0 oz removed....] You know what?! Do your thing, bruh! Screw it! I am dumping in half too! 🤣🤣🤣 Can't even trust a manufacturer to have an accurate bottle anymore! 🤣🤣🤣
Scared to live in hell out of me! I was on the highway one day in a car here in Las Vegas blew out its rear differential and all the parts were bouncing on the blacktop at 65 mph and I dodged them with my Corvette I almost hit all the metal parts that blew out and it would have shredded the whole front of my car and I just missed it. This motor blowing out brought back memories when that happened except there were nothing no parts that went anywhere.
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
Eben Rockmaker
Independent AMSOIL Specialist (Dealer#: 5331179)
www.amsoil.com/offers/pc.aspx?zo=5331179
Mobile: (702) 472-3614
Stay Connected
Subscribe - th-cam.com/users/SyntheticOilProtection
Just use Honda coolant. And don’t let your brake reservoir get below the low setting when bleeding. And use a clear hose so you don’t get brake fluid everywhere
Amsoil coolant is excellent. Manufacturer fluids aren't always superior to 3rd party products.
@@LordAfrocious Amway makes coolant?
@mistercohaagen my favorite coolant is called the low toxicity biodegradable coolant it's compatible with all other coolants and you can mix it to the ratio you want we'll make a big Improvement in your vehicle warm up times with the Dominator coolant boost.
You can get those products right through my link and that would attach me to you in the future I could always be your Amsoil dealer and would be able to answer your questions about improving the performance and lifespan of your vehicles by choosing the right fluids👍
Eben Rockmaker 702-472-3614
New Video - th-cam.com/video/el0YnOpPNMo/w-d-xo.htmlsi=B-wBCrEHhDTkV3Yq
linktr.ee/EbenRockmaker
Appreciate the video. I've always been told not to shake the brake fluid bottle because it will add air bubbles in your brake line.
You forgot to drain the remaining coolant from the engine block and you should also use a transparent tubing for bleeding the brake.
Flr Power
Nice Add!
Why is that?
@@dianasanta7587 that's because you can't mix the blue antifreeze (OEM) with another, and he just flush the radiator but there still antifreeze inside the engine. You only need to turn on the car with the Valve open to flush completely.
@@josesalinas4494 Great input! Another thing to do is to empty the plastic reservoir.
If it was my car I wouldn't turn it on without any water in it because you could starve the water pump and if you got a phone call or got distracted and forgot you could totally wreck your motor.
I know it sounds funny but we get easily distracted these days.
That distraction could be thousands ☕😃🎬
I think you should mix the coolant 50/50 because even though it's warm in Nevada the factory antifreeze has additives that prevent corrosion that your whole system that your not getting at 20%. As far as the Amzoil additives, I think snake oil. They have good oil but, everything else seems far fetched. The guy at the end saying his car is riding better, the fluid change isn't going to do that !!!
AMSOIL Performance Test Results - www.amsoil.com/performancetests.aspx?zo=5331179
Amsoil is the first in synthetic in 1972 they are the make the first synthetic motor oil first synthetic transmission fluid and first synthetic gear lube.
♥️ AMSOIL Performance Tests: Read This Article - www.amsoil.com/performancetests.aspx?zo=5331179
I use Amsoil Signature 5w-20, PI, and Upper Cylinder lubricant. Their products are not snake oil. I didn't use their engine flush, rather ATS or Liqui Moly. My sister has a Fit and the concentrated detergent in PI has worked wonders on the built up gunk in her fuel system and combustion chamber. She is the type never to touch her car outside of an oil change, coolant top off, and air in the tires. Not all additives are junk.
Hello..
Please advise which antifreeze was poured into the Japanese Honda Fit 1.5 i-vitec 2011 car?
I recommend the low toxicity biodegradable coolant that's my personal favorite I use that in all my vehicles because it's compatible with all other makes models and colors I also use the Amsoil Dominator coolant boost which you'll see next to that on the website when you use my link that will attach me to you so in the future I can answer all your questions about improving the performance and lifespan of your vehicles by choosing the right fluids as your independent Amsoil dealer😊☕️👍
www.amsoil.com/p/propylene-glycol-antifreeze-and-engine-coolant-ant/?zo=5331179
You also want to add the 6-month PC membership to cart that's going to give you the best value on the products you'll also have the free shipping at 100 bucks or more and the new promotion which is right here below.
Promo: FREESHIP
Thank you very much for your help
There is no mention of draining the coolant that's in the engine block itself!
Correct the block holds about a quart depending on the vehicle all you do is a couple draining fills run the heater core and that will get most of the coolant out.
The most important thing is to continue to flush it until the fluid runs really clear once it's running super clear you're ready to put the good stuff in 🎬☕☕💯
This is my link if you ever have any questions always happy to talk with you appreciate you checking out my TH-cam community.
When you use my link I would get the credit for your orders and in the future I could always talk with you because I would be your Amsoil dealer.
Professional YouLubher: Eben Rockmaker Regency Gold Direct Jobber AMSOIL Specialist (Dealer#: 5331179) 702-472-3614
If you're New to AMSOIL I recommend the AMSOIL 6 Month PC Membership - www.amsoil.com/offers/pc/?zo=5331179
I like your videos but can you mention sizes of bolts, wrenches and tools in general used , still awesome videos
I usually do.
If they're very general tools I usually don't mention it like 10 mm or 15 mm socket for an oil Bolt because they are in every socket set
If you haven't got a socket set yet I recommend if you're going to be doing basic work you can get a Craftsman socket set on sale right now during the holidays or you can also get a lifetime warranty socket set from Harbor Freight however they are not very strong tools say you cannot pound on them with a hammer or use a air ratchet or use an impact gun because it will crack the metal because they are very very very cheap tools.
If you're looking for something of real substance I recommend getting a used Snap-on set which is the best you can get pawn shop or on line.
If you have any other questions feel free to give me a call Aaron☕
Thanks Mike Myers '' AWESOME BABY''
🎬💯😊
i though you suppose to top of the brake fluid while breeding the fluid to prevent air going in
Yes thats right
does the car key have to be on the on position?
No
Is this a self bleeding cooling system? I have an 07 and need to do both of these flushes. Also for an occasional autocrosser would you recommend upgrading to dot4? I have factory brakes with performance pads and super sticky hankooks rn.
Yeah pretty much the Hondas are self bleeding sometimes you might want to squeeze the tubes and you'll see it burp the system a little bit but usually it's pretty easy.
Yeah you can run the dog for race fluid it just has a higher boiling point and it's better for super autocross situations
This will give you all the products for your specific vehicle and the fluid capacities-
Lookup For Your Vehicles - www.amsoil.com/guides.aspx?zo=5331179
Always happy to help you anytime Travis☕🎥🇺🇲
Is the butterfly valve able to be purchased at auto part store?
I think only Honda has them I'm not sure. They're really expensive......lol
Do you have this same service in California?
Great question, yes you can order the products and when you use my link you will get the products at the very best value when you get them at your doorstep you can take them to a mechanic and have them installed or you can also hire a mobile mechanic and they can come to your work and install it the most important thing is to watch them do the service it's always good to make sure you see the fluid go in your vehicle👍
✅ ✅ ✅ Save 25% On Next Fluid Order: www.amsoil.com/offers/pc/?zo=5331179
❤️ 🇺🇸 ❤️ Your Professional YouLubher: Eben Rockmaker. Find The Right Fluids For My Vehicle - www.amsoil.com/guides/?zo=5331179
Can you put that on a Honda Odyssey 2005, bros?
Yes, Yes most of all the Hondas are all exactly the same very simple to work on They all pretty much take the same oil filter that I'm aware of Everything is right here in the lookup guide If you have any questions on anything always happy to talk and when you use my link I would get the credit and I could always answer your questions in the future on the products.
Professional YouLubher: Eben Rockmaker Regency Gold Direct Jobber AMSOIL Specialist (Dealer#: 5331179) 702-472-3614
If you're New to AMSOIL I recommend the AMSOIL 6 Month PC Membership - www.amsoil.com/offers/pc/?zo=5331179
Will this work for a Honda Fit model 2018???
Yes, You want to get everything here on the lookup guide It will give everything for your year make and model.
Find AMSOIL Products For Any Vehicle - www.amsoil.com/guides/?zo=5331179
If you're new to Amsoil I recommend the 6-month PC membership will give you the very best value on the products if you have any questions let me know when you use my link I will be your go to Amsoil guy in the future and I'll get the credit for your orders which I appreciate the business future business in advance Thank you.
❤️ 🇺🇸 ❤️ Professional YouLubher: Eben Rockmaker Regency Platinum Direct Jobber AMSOIL Specialist (Dealer#: 5331179) 702-472-3614
✅ ✅ ✅ You will get Best Value with 6 Month AMSOIL PC Membership because You get $33 back on a $100 purchase after the difference in Sales Tax with No need for Auto Renew - www.amsoil.com/offers/pc/?zo=5331179
Thank you very much for this video.
😉
Do you only got to bleed the one side of the brakes to affect both sides ?
You bleed every corner of the brakes.
That coolant boost looked like a Smirnoff ice
That's what I thought too I was he's about get lit 😂
😆😊😃
Is all of it the same on a 2012 manual base non sport?
It's very similar but it's a different fluid and you'll just look it up right here is the lookup guide
AMSOIL Makes it for your Vehicle Lookup - www.amsoil.com/guides.aspx?zo=5331179
Thanks for the question really appreciate it and we're doing the giveaway tomorrow at 11 a.m. Las Vegas time Saturday where we will be giving $100 gift card away. All you do is share the channel and send a screenshot of the share to me with your full name and I'll put you in the giveaway.
#EbensGiveaway
Eben Rockmaker Independent AMSOIL Specialist (Dealer#: 5331179)
Mobile: (702) 472-3614
My link: AMSOIL 25% Less Wholesale & FREE SHIPPING: www.amsoil.com/offers/?zo=5331179
Hello, what size of the wrench are you using?
The motor oil bolt is 15 mm the front brake caliper is 10 mm. Basically, if you have a standard metric socket set with open-ended wrenches you're good.....
Thanks for reaching out to me
Thx for the videos
9:20 what is the name of this product 🤔
It is the Amsoil PI performance improver cleans the valves injectors all the carbon deposits inside the combustion chamber www.amsoil.com/p/p-i-performance-improver-gasoline-additive-api/?zo=5331179
Love your video very much ❤
Thanks 😊🎬😃
I have honda fit 2012 the milage is low 12 km / ltr
Hey I love amsoil! All I use in my 1967 camaro.
Are you on face book because it would be great if you could share my TH-cam Channel video on their tag me also send me a screenshot of your share and I will save you in the end of giveaway 702-472-3614
Facebook - facebook.com/profile.php?id=100007973957868
what is the name of the gear box oil
This is a hundred percent synthetic fuel efficient automatic transmission fluid it's a proprietary fluid.
www.amsoil.com/shop/by-product/transmission-fluid/automatic/signature-series-fuel-efficient-synthetic-automatic-transmission-fluid/?code=ATLQT-EA?zo=5331179
Should run the car to get any bubbles out of the cooling system.
Yeah this is one of those cars where it's like unbelievably easy to change the coolant
When bleeding the brakes as assistant pushes and holds brake pedal down and you open the valve are you quickly opening and closing or is that little bit that spurts out all that’s in the line every brake push?
Like at 2:52 and 3:12.
jdhrap when the assistant presses down the brake pedal it pressurizes the lines. Then the bleeder screw is opened any air or old fluid is expelled. The bleeder screw must be closed before the brake pedal is released or air will be sucked into the brake lines, this is very bad. Also as the fluid is bled out you must keep adding more fluid to the master cyclinder throughout the bleeding. He doesn't show this in the video.
@@slalomking if i want to change the brake lines upfront should i bleed the side im going to change all the way drained to take off and replace the line then do this method again to have fluid back in? Sorry first car
@@johnnyherrera7821 No you don't have to drain the removed back line. Remove it, then install the new one. Pump the brakes to fill the new line and bleed it at the disc caliper. Bleed it until it is air free. Since it is a new line, check the line where it attaches to the disc caliper and the upstream connection. Also you should bleed the opposite wheel just to make sure it is air free also. The front and rear brakes are split. You work on front you must do the two up front. Work on rear you should check the other side on the rear also.
@@slalomking thank you it was hard to find a brake line replacement video on my Fit so watched someone do it on a accord and was pretty much same process. Thanks again🙏
2:20 “Huh huh! Hey Beavis...he said NIPPLE. Huh huh!” “Yeah! Yeah! NIPPLE!!” “Huh huh huh huh!”
29 mpg that's terrible for a fit amsoil must suck
And wait!….there’s more. 😜
💯💯💯
My dude put half the bottle into the coolant. Bottle says put 1 oz per quart. Lol
[Grabs measuring cup] [Measures 5.6 oz] [Bottle says 5.0 oz removed....]
You know what?! Do your thing, bruh! Screw it! I am dumping in half too! 🤣🤣🤣 Can't even trust a manufacturer to have an accurate bottle anymore! 🤣🤣🤣
Wow, how does he drives his car??? Lol i drive like a maniac and still get 34mpg and engine is at 250k+ 😅😅😅
And you use the wrong side of the wrench.
Not sure what you mean vic?
Lmao. Nooooo
Scared to live in hell out of me!
I was on the highway one day in a car here in Las Vegas blew out its rear differential and all the parts were bouncing on the blacktop at 65 mph and I dodged them with my Corvette I almost hit all the metal parts that blew out and it would have shredded the whole front of my car and I just missed it.
This motor blowing out brought back memories when that happened except there were nothing no parts that went anywhere.
Just here to say 29 MPG from a Honda Fit, even pure city driving, is NOT good. Not sure what these guys are on. Red flag. Lol.
This is an older car. The newer Honda fits average right around 33mpg average