Sail Life - Will it stick? Gluing the keel back in place 😬 Helia 44
ฝัง
- เผยแพร่เมื่อ 7 ต.ค. 2023
- In this week's video, we finally glue the keel back in place on the Fountaine Pajot Helia 44 using Sikaflex 292.
SIKA PRE-TREATMENT CHART: usa.sika.com/content/dam/dms/...
** Links **
Sail Life website:
www.saillifechannel.com/
Sail Life on Patreon:
bit.ly/SailLifeOnPatreon
Sail Life on Instagram:
/ saillife_
Sail Life on Facebook:
bit.ly/SailLifeOnFacebook
Sail Life on Twitter:
bit.ly/SailLifeOnTwitter
Mads's problem solving skills are amazing. The way he can think through a task thoroughly is truly impressive.
You are 100% a nerds nerd and I love it. Great job I love the content!
Your videos are both educational and entertaining. Really appreciate how thoroughly you explain what you're going to do and then showing us exactly how it works out. Your DIY work is inspiring!
Future reference... placing sheet metal under the floor jack allows its centering action to follow the load upward.
I have been watching this guy from the beginning. His attention to detail is amazing. He actually reads the instructions on everything he uses and does. I am not a boat guy but have learned a lot just by watching him work over the years..
That was a great Mads project, solves the problems, conducts the repairs and develops a plan to perfectly re-install the keel.
While I will never attempt this on my boat, I found this video to be one of the most interesting and well thought out videos I have every watched on TH-cam of the tens of thousands of videos I have watched. Bravo!
Audio issue on Ava's microphone. One channel is out of phase ie plus and minus swapped around on one channel so when played in mono no sound is herd. And when listening on headphones it sounds weird.
Fix you can either discard the out of phase channel in edit. (the one that cancels with the music) and only have one mono voice channel in edit or correct the wiring of the micrapone into the camera. I would suggest both.
Causes Using an incorrect jackplug or plugging a balanced jack to a stereo in, mono jack into a stereo input. Wrongly soldered cable etc. could all cause this issue.
Really enjoy these videos over the years. Awesome to now have history tours.
So much work just for one keel. I cannot imagine any marina putting that much effort into a job.
This is such a classic Mads job, manual reading (rtfm), test fits, timers, material data sheets, material testing, its got it all. I tell my missus, if i need to do a job on my Albin Ballad I need to do it the way Mads would do it.
I'm super impressed with the way you installed the keel. That was a very well thought-out plan.
Mads I have watched every one of your videos (yes I know I am a saddo), and this video absolutely sums up your approach to any job you tackle - you put many of the so called professionals in the industry (including the boat builders) to shame. 😀👍⛵️
I agree.
Mads, you're a real-life superhero. All you need now is a cape.
What are you smokin? lol
I for one look fwd to seeing what cat you will get.
- yes I know you said you don't want one, but think of all the room for activities and possible projects...
I am with you on that. I would think the probability is around 90% that a cat will be the next Athena
I would have made a tent and run a dehumidifier to buy myself as much time as possible, but I love how Mads ran materials testing and found the precise time that the material skinned over. That’s just an obscenely tight application window. Good golly, 20 minutes 😬😖
I continue to enjoy watching your channel. Not a boat guy but enjoy watching the DIY stuff and following your journey. Maz does an excellent job articulating technical information and overall the content is entertaining. I've learned a lot by watching. Thanks for sharing.
Totally flips my brain nothing else holds the keel in place.. LOL
you do such great work ..
My wife said that the keel replacement was very boring. For me it was extreamly intresting. Maybe one of the best videos of the channel😊
Super impressive with Mads methodical approach , due diligence , and outside the box thinking ! I'm just in awe . There's something elegant in Mads work going from idea to the finished product . Much appreciate the sharing of the knowledge and steps as they have other applications outside of boatwork . Mads is an awesome teacher !
Sikaflex sells 292-LOT for that application. The shipyard that sold you the 292 should have informed you that LOT means long-open-time.
Just like the previous video on the drive Shaft this video on keel is very fascinating. I don’t think I have the patience that you have, but nonetheless a great great job. You have a career in repairing sailing vessels, I highly recommend you to anybody who is interested in and repair their sailboat. Good job just loved your video.👏👏👏👏👏👏👏👏👏🍺🍺🍺🍺🍺🍺🍺🍺🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸☮️☮️☮️☮️☮️p.s. your wife also did a fantastic job on all the canvas and all the clear plastic. Good job y’all you guys make a good team.🥰🥰🥰🥰
I am reading that in L.A. Olympic Games at 2028 Keel Lifting will be introduced! You are the golden winners deffently!!!!!
Fountaine owes you. Big time.
Enjoy the cooler weather here this week.
Your knowledge and/or your intuition as to what to ….and how to do it is “unmeasurable! There are individuals out there that pretend to know, …and there is a guy like you that knows based on his experience and research how to take this kind of stuff - you’re the best 👍🇨🇦
When Mads first knew for sure the keel was going to get dropped, I bet he had also formulated what we saw for the actual drop. I ythink he got his mind from a Cray Super Computer. And of course lets not forget this weeks History with Ava.
Well done Mads that was the most spiffy glue up precision location doo dad I have ever seen😊
Dude, and family, I may not comment often but have been lurking for a good while now.
Your Scientific Method of solving problems, (ex: the 20-23 minute popsicle stick test) are VERY impressive! I hope and pray I can emulate, in some small way, you attention to detail when the time arises.
Thank you. Keep on keeping on.
For large amounts get your adhesive in sausages twice as much and much less packaging.
Wow Mads you are so thorough! Great job!
Have a great time at the Annapolis Boatshow guys, I wish I was there to place an order with Island Packet. Maybe Next year. Best Wishes. Bob in Wales (maybe a tide me over Sailboat in between).👍🏴🇬🇧⛵️🌟🌟🌟❤️
Well done Mads. You're such a pro.
Watching this reminds me of my Navy days being at the Charleston Naval Base on the Cooper River went under the bridge many times.
my local pub in my village in England is over 600 years old....😂😂
Time to get a new introduction, Film and speech. As we know you two so well now.
Mads - Highly recommend reading The Boy, Me, and the Cat: Life Aboard a Small Boat from Massachusetts to Florida and Back in 1912
The Boy, Me, and the Cat: Life Aboard a Small Boat from Massachusetts to Florida. By Plummer.
Plummer sailed from Massachusetts to Florida in a traditional catboat ~20’. The story is beloved by us catboaters and tells a story from a smaller boat experience - smaller than what you often see these days.
Red Seas also from the UK showed how they dropped and repaired their Leopards keel. That had some intricate lines to line up. Your brother in law certainly picked the best person to help. Awesome
Mads, once again you have exelled your self with all you planning work, well done. I think if I were in your position I may have got and extra couple of hands and guns to apply the Sikaflex but I am pleased for you it all went well. Cheers Ian
How does one convey the same sentiment that over 100 viewers have already said....
Oh, Yeah...
Ya Done Good Boy!😃
Mads and Ava, it seems you have found your sweet spot of projects and glorious sanding.. Great videos.
Your friends Jerry and Anne from s/v Sweet n Salty in Grenada.
Always fun to watch your thought process, Mads. How really cool.
Why isn’t the keel bolted to the hull?
@@Nordic-Song I believe the keel is only to stop leeway,not for stability, so it is light and doesn't need bolts, I think.
Speaking of Internet 'firsts' would love to see you continue living on a boat/sailing while working on its replacement. Seems like everyone else takes a 1-2 year break from boat life to get a new boat. Be the 'first' to keep living on your boat.😂
Mads, the attention to detail and the patience you have shown is just impressive and as eric said a Nerds Nerd well done and thankyou
Just the best example of Mads’ attention to details! Huge congratulations 🎉 😊
I love the contributions that both of you give to the channel. The science and the plantation tour were both really cool.
Oh Glorious Gluing!! 😁
Thoroughly enjoyed this.
Omg, this was as exciting to watch as a high-action blockbuster movie! 😊
I am super impressed by the attention to detail mads spends in reading and following the directions on paints and adhesives to be sure the specifications are within the work window and use parameters. This is actually pretty rare even in so-called "professional" marine techs as they go about contracting work for poor unsuspecting schmucks who actually believe the people they are hiring have a clue what they are doing -or even care if the job comes out correctly.
The time spent rehearsing and choreographing the procedure so the process was under the time limits for good adhesion at the given atmospheric conditions was impressive too.
My mind boggled a little when you told us how many tubes of adhesive you needed. At somewhere around $20/tube that made my head swim. Even though you weren't paying a couple of "professional" marine techs $300/hour to do this job the material costs still were not cheap just in themselves for a DIY job.
Oh So Gloriously Purrrrrfect!!!
Still loving your videos after all these years
I was very impressed by your thorough and methodical approach
Your work quality puts 90% of “pros” to shame
Hate to break this to you: Sikaflex usually does not cure well beyond a thickness of a few centimeters. The moisture needed for it to cure cant penetrate through such thick layers. Chances are the top of the keel is going to sit in soft sikaflex. There is a diagramm for curing speed vs. thickness in the 292i datasheet.
You are so meticulous , and so inspiring. I am trying to slow down and do things properly. Hàts off to you
When the zombie apocalypse kicks off, Mads is in my top ten people to recruit onto my team.
Top quality and professional repair
I'm confident that they were nowhere even close on the attention to detail that you displayed when the factory originally installed that keel. It had no choice but to be a grand success !
Another great video Ava and Mads .
Exceptional work!
Well done. Fantastic job Mads, as usual
Great thinking!
Good work as usual. Great show. Thanks 4 sharing.
Cheers
Great job!
Fantastic work Madz
Love this detail as always Mads the perfectionist
Great video your videos always go by so quickly
Nicely done.
OMG! 30 tubes of 292.... Almost like robbing a bank 😮
I'm curious; how can you be sure that the beads of Sikaflex smooshed - this time - against the sides of the keel slot? I mean you can't actually get to see, right?
Did we get any squeeze out?
Pretty dang impressive!!
Well done Mads. As ever, your attention to detail is wonderful to behold. Love it.
fantastic stuff, guys. Mads, great approach. Really fun to watch someone run through such a great process. Downright inspirational.
We saw you guys in Annapolis, not sure how you escaped from my TV but it was fun.
Enjoyable and satisfying, as the repair and maintenance videos you so excellently make often are. Chapeau!
bloody good job mate!!!
Great job
I know it's too late just wondering if you put tubes of glue in refrigerator the night before if it would have extended your work time. Love the show.
Fascinating and scientific. Thanks.
excellent video
Great work fellas!
Perfekt done Mads!
Looks like another high quality job. Well done
Congratulations, stay safe and we'll see you next week.
Great video as usual!
Also great mix of DIY and colorfull local atmosphere and history.
Thanks to both of you from sunny but colder Denmark.
as always your attention to detail is impressive!
I‘m pretty sure that it won’t be long until the wikipedia entry on DIY will show a picture of Mads! 😂
Well done Mads and Ava, your attention to detail is superb, and I love how glorious it is when I receive notification of your videos! LOL, Cheers!
Congratulations on getting it repaired. As always your Attention to detail amazes me.
I still think you're crazy getting another boat but you do you.
Suggesting no new boat for Mads is like telling a painter not to start a new canvas.
It's what he does, sailing is just a bonus part.
I've watched this master from the first and he has definitely spent far more time working on boats than sailing them. But that is the part of the journey Mads seems to enjoy the most and frankly, most sailing channels do better with DIY boat repair videos than the actual sailing videos or videos of some foreign tropical spot.
Maybe because we can all relate to the repairs and the struggle while we all think we already know how to best enjoy a tropical paradise.
Not really sure the reason why but it just seems to be so.
No boat is perfect in every way. And you can't do every option on one boat. Mads seems to really love innovation, electronics, gadgets and making things work for him. Sometimes it's more about creating and progress than enjoying what is.
Let's hope Mads never loses his desire to do. He is a treasure for sure.
And let's hope he does get a new project so we can all enjoy the repairs.
If I ever had a boat built or refurbished, I would want you and Johan as lead project managers!
Just another great video!
Excellent video as always. Your attention to detail is impressive. No slap on and dash from you for sure! The tour narrative was also well done with a very diplomatic hand at the delicate subjects at hand in such a historic place in history!😀👍
Well done man. That's a legacy video.
Awesome work!
very impressive work on the keel
Excellent work on the keel repair! Your planning for the re-install was riveting - you are a nerds nerd, indeed, Mads! Love the US content!
I really like watching and listening to your thought processes you use to perform tasks. I may, one day, need to use some of your processes to apply it to something I’m working on. Keep up the good work.
Mads, You out did yourself, I was glued to my seat, so exciting and interesting. An you did that with Glue. Bravo
You've got skills. Awesome.
The Ryobi caulk gun is easily the best tool in the cordless Ryobi line. If you want one for Athena but don't want to futz with Ryobi batteries (which are not long lived) you can find adapters that allow you to use 18 volt batteries from your preferred platform.
Dude, you could built boats and with the brandishing of this video on you tube; I’m sure that you wouldn’t have a hard time acquiring a sizable clientele; heck, Fountaine Pajot might even offer you a job!!!!