Love this build, it coming along reallly well. In Oklahoma you have to hav permits and signage showing you are hauling possible exploding tanks of welding gas on the trucks. Secure the heck out of that stuff.
Just wanted to let you know that as well as all of y’all’s awesome builds y’all have also built an awesome channel. Always look forward to your next video. Keep up the amazing work!!!
It's really entertaining to see the huge amount of work y'all get done on the truck in every video. Ain't scared of getting your hands dirty, grinding and working into the night. Mad props to you two.
Heh heh, what a cool old Ferd! Back in the 1990's, I used to drive one of these with a 534 cu. in. V8 gasser. It would literally pass everything but a gas station.🤣 About 3-4 mpg. pulling a 35ft. flatbed.😲It originally had a 4 bbl. Holley with a built-in governor, which we replaced with an adapter and an Edelbrock 4 bbl. and the mileage immediately jumped to 8 mpg. and ran so much better!😉 The one we had was a N.M./Arizona truck all of it's life and was pretty much rust-free. Someone had taken the time to do a really nice paint job on it.. a 2 tone red and white, and the interior was bone stock and perfect! It had a 5 speed and a 2 speed axle, which was geared just right for the big old gas burner under the hood. Some Mexican truck collector spied it when were in El Paso one day after dropping a load of scrap metal and offered us twice what we paid for it, and my boss sold it the next day!😄
It sounds like a In-line 671 Detroit. 6+1 Eaton trans. Yes Cory some of those air dryer do that. Good looking N model Ford. That brake valve is hard to get to. Back in 1974 I made a stubby wrench for the air line to that valve. I still have that wrench today. As long as you do not lay those tanks down you can transport them safely. If you lay them down it becomes a hazard. Then they must have caps. I like your channel. When I was young my wife worked right by my side just like Hanna. She helped me rebuild an inframe job on a 8v71 Detroit and she was pregnant. She out worked two men and she was a tinny little thing. I have a 1966 c50 flat bed dump. I have to do the brakes on the next go round. I hope you all made it ok.
I don’t know what Hanna charges for her labor, but it’s not near enough. Hanna you are a treasure to Cory. You two are my favorite videos. ❤ 😊 THANKS !
Great job on all the detail work getting the Welding Rod ready for Daytona. Happy you are getting to go and lots of prayers for a safe trip there and back🙏Prayers that the truck runs well with no issues. Have a Blessed Thanksgiving and enjoy the ride🥰
This build is wicked good seeing how your partnership build bond is sensational we get a lot of chuckles along the way. Good luck with your trip hopefully smooth sailing in the minty ride have a blast at the event .
Hey Cory/Hannah. Thanks again for letting us view your projects. Cory. You scare me a little. In one of your camera shots, I noticed a caged parking brake. Your parking brake will not work with the caging tool compressing the spring. I was glad to see you put on an air dryer. Just a note. You want to have a slight downward slope from the compressor to the dryer. So any moisture in the line doesn’t freeze up when it sits. Also leaking out the exhaust port. 90 percent of the time it is a bad brake chamber. More specifically service and park brake chamber. They are suppose to be separate from park to service, but sometimes they develope a leak between the two. Remove the service line from the chamber. Block the wheels of corse. Release the park brake. See if you have air coming from the port you just removed. If so, replace the chamber or piggy back. Be careful to get the correct size. The other thing could be a quick release valve that is hanging up. Or a stuck exhaust port further down the line. Good luck!
Watching Cory try grippo’s for the first time, he takes a few bites , looks at the bag and then grabs the ski, his eyes told the story…. “Grippo’s ain’t no joke” if you’re ever back in Evansville and you see them in the box , buy them … they are a lot more spicier :) great video guys and thanks for content!!!
What a journey! As I am sure you both felt ... 2 steps forward and 3 steps back... but you both figured out how to get it moving in the right direction... safe travels.
Truck looks awsome guys , you both work hard to create some awsome vehicles. Love seeing the dogs in the school bus , buckwheat seems to love it , and I'm sure mini wheat doas too . Keep up the good work , respect from the uk 👍👍👍👍
Hey Hi again Corey and Hannah from the D Michigan 😁 thanks for sharing another great video update and congrats on the progress 🎉 of the Interford 😅 but looks great 👍 and have a great trip 💖⚡✌️
In the trucking industry, those mirrors are known as West Coast mirrors, you can find them a lot at the time at truckstops in the truckstop stores and they are expensive there but sometimes you can find them there. You used to be able to anyway nowadays who knows haven’t been in a truckstop for years, just thought I’d mention that
I'm praying and my fingers are crossed but not at the same time 😊 I have an old 89 F250 I get nervous driving it 80 miles to Nashville and back. I would be sweating going that far and something you built With really no seat time in it so far😅 As a truck driver forced to take hazmat test The guys are right you need to put those safety caps On your acetylene bottles
Awesome truck, Hope you have a safe trip, but for God's sake remove the torch regulators along with your Argon bottle regulator and install the transport caps. Several have commented on the torches but the welder tank also needs capped. If you have already left for Daytona I am sure there will be several gas suppliers along route where you can get some. Enjoy watching your channel but you really need follow some safety practices.
Cory you need to put the safety caps on those torch bottles. Anytime you transport them from your cart or anywhere. And I hope Hannah put some weight in that can so it doesn’t blow out of the holder. Ya’ll need to think about safety first when transporting stuff
In addition to DOT concerns, your personal well being is at stake. The way I understand it, one fitting broken off can cause a bomb like explosion, and the other makes it a bottle rocket and flys thru the air.
I'll follow along 😜 simply because I like the truck 🚛. Just started watching your content an find it very entertaining 😂. Good luck on your trip 👍 guys 🎉.
Hey guys! Love watching you two work together! Hannah I know it's a silly question, but what brand of boots do you wear? Safe travels in FL... have fun!
Yeah a crowd.... When I was there in late 2016, I was told every Polar Express trip was booked a year in advance, and some were booked for the second year out.... I love French Lick/West Baden/Spring Valley/ Paoli. I have GOT to get back over there soon for a weekend or day trip.
Even if you take it as is, people will dig it. I still say paint the bumper and grill white. Probably the wheels, too, unless you're gonna put on some pretty chrome wheels.
Cory is that a Mc Donald’s table you got in your kitchen,you’ll make the trip no worry’s,I run around in my pick 6.0 all the time with the same amount of tool you got in Hanahas welding truck cause I’m forever fixed shit for everyone I meet,me putting on good cloths are covered in grease with in 2 min.any way I love helping people and that’s how I roll much like ur self😂,Dan and Shelley ,Sask.Canada❤
You guys like them trucks, you should go over to what the rust, there is one over there with a service bed a v6 of all things .I think he said owner I selling all cheap alot of trucks but that one was very cool and had a crane on the back
What engine are you running? And the transmission? It looks like a lot of speeds! Great looking project. I wonder what miles per gallon you are getting.
So cool when you opened that box and it had a 12 pack of ski they are really big in our area so the next time you go to lake cumberland and get close to Hodgenville you can have a ski and smell our butts from a mile away, your friends from Arrowhead BBQ!!
we have a similar bearing greaser in aus but instead of pushin it into a can of grease it has a grease nipple on it , just pump it up very cleen way to do it pushes all the old grease out the sides not into your can of grease
Corey you really need to quit cutting by your body those grinders are no joke... Just trust me on this one. Accidents happen in the blink of the eye and can really be a bad deal. I just had one of those freak accidents happened to me and now I'm recovering from surgery on my left hand makes it real hard to do damn near anything like I'm used to. Thankfully I had a 96,000 surgery to put my hand back together and it will be a good year before I regain full use of it. Just please think about that. I would rather be an example then to see you have to suffer through a recovery process. I like your channel and I like the stuff you do.
Love this build, it coming along reallly well. In Oklahoma you have to hav permits and signage showing you are hauling possible exploding tanks of welding gas on the trucks. Secure the heck out of that stuff.
Just wanted to let you know that as well as all of y’all’s awesome builds y’all have also built an awesome channel. Always look forward to your next video. Keep up the amazing work!!!
All I got to say about all this is Hannah is a hell of a hand and a wife to have around . You are truly blessed Cory.😊
It's really entertaining to see the huge amount of work y'all get done on the truck in every video. Ain't scared of getting your hands dirty, grinding and working into the night. Mad props to you two.
that welder truck looks killer, dont forget the safety caps for the Acetylene and oxygen tanks. have a safe trip
Heh heh, what a cool old Ferd! Back in the 1990's, I used to drive one of these with a 534 cu. in. V8 gasser. It would literally pass everything but a gas station.🤣 About 3-4 mpg. pulling a 35ft. flatbed.😲It originally had a 4 bbl. Holley with a built-in governor, which we replaced with an adapter and an Edelbrock 4 bbl. and the mileage immediately jumped to 8 mpg. and ran so much better!😉 The one we had was a N.M./Arizona truck all of it's life and was pretty much rust-free. Someone had taken the time to do a really nice paint job on it.. a 2 tone red and white, and the interior was bone stock and perfect! It had a 5 speed and a 2 speed axle, which was geared just right for the big old gas burner under the hood. Some Mexican truck collector spied it when were in El Paso one day after dropping a load of scrap metal and offered us twice what we paid for it, and my boss sold it the next day!😄
It sounds like a In-line 671 Detroit. 6+1 Eaton trans. Yes Cory some of those air dryer do that. Good looking N model Ford. That brake valve is hard to get to. Back in 1974 I made a stubby wrench for the air line to that valve. I still have that wrench today. As long as you do not lay those tanks down you can transport them safely. If you lay them down it becomes a hazard. Then they must have caps. I like your channel. When I was young my wife worked right by my side just like Hanna. She helped me rebuild an inframe job on a 8v71 Detroit and she was pregnant. She out worked two men and she was a tinny little thing. I have a 1966 c50 flat bed dump. I have to do the brakes on the next go round. I hope you all made it ok.
I don’t know what Hanna charges for her labor, but it’s not near enough. Hanna you are a treasure to Cory. You two are my favorite videos. ❤ 😊 THANKS !
lol.
I love the welding truck. You guys work so good as a team . I enjoy watching always !!
For the old taillights you can buy just the covers, they are a stock Ford part for stepsides. You two have a safe trip and happy Thanksgiving
That gift from George is the most Evansville gift ever. Glad you enjoy our delicacies. Grippos are the best.
Good build/ preparation for your event Cory and Hannah.
That Fordonational will be a good tow/ service rig.
Great job on all the detail work getting the Welding Rod ready for Daytona. Happy you are getting to go and lots of prayers for a safe trip there and back🙏Prayers that the truck runs well with no issues. Have a Blessed Thanksgiving and enjoy the ride🥰
Amazing people the both of you and the work you get done in the amount of time spent. Safe travels, great video, CWC gets things done !
You should check state laws , in some states its illegal to transport gas an oxygen bottles without the caps on!!
I love how you two work together it works and I love how turky works on bearings and everything else that comes her way
Just found you guys today… binging and loving your efforts! Rusty gold pieces of art. Keep up the great work. 👍
This build is wicked good seeing how your partnership build bond is sensational we get a lot of chuckles along the way. Good luck with your trip hopefully smooth sailing in the minty ride have a blast at the event .
Hey Cory/Hannah. Thanks again for letting us view your projects. Cory. You scare me a little. In one of your camera shots, I noticed a caged parking brake. Your parking brake will not work with the caging tool compressing the spring. I was glad to see you put on an air dryer. Just a note. You want to have a slight downward slope from the compressor to the dryer. So any moisture in the line doesn’t freeze up when it sits. Also leaking out the exhaust port. 90 percent of the time it is a bad brake chamber. More specifically service and park brake chamber. They are suppose to be separate from park to service, but sometimes they develope a leak between the two. Remove the service line from the chamber. Block the wheels of corse. Release the park brake. See if you have air coming from the port you just removed. If so, replace the chamber or piggy back. Be careful to get the correct size. The other thing could be a quick release valve that is hanging up. Or a stuck exhaust port further down the line. Good luck!
Awesome build guys good luck on your trip to Daytona stay safe guys
Watching Cory try grippo’s for the first time, he takes a few bites , looks at the bag and then grabs the ski, his eyes told the story…. “Grippo’s ain’t no joke” if you’re ever back in Evansville and you see them in the box , buy them … they are a lot more spicier :) great video guys and thanks for content!!!
What a journey! As I am sure you both felt ... 2 steps forward and 3 steps back... but you both figured out how to get it moving in the right direction... safe travels.
Truck looks awsome guys , you both work hard to create some awsome vehicles. Love seeing the dogs in the school bus , buckwheat seems to love it , and I'm sure mini wheat doas too . Keep up the good work , respect from the uk 👍👍👍👍
Cory don’t want to touch the grease - Hanna bare handed spreads the grease!!! Cory what a …….! Can’t say it!!
Hey Hi again Corey and Hannah from the D Michigan 😁 thanks for sharing another great video update and congrats on the progress 🎉 of the Interford 😅 but looks great 👍 and have a great trip 💖⚡✌️
In the trucking industry, those mirrors are known as West Coast mirrors, you can find them a lot at the time at truckstops in the truckstop stores and they are expensive there but sometimes you can find them there. You used to be able to anyway nowadays who knows haven’t been in a truckstop for years, just thought I’d mention that
Looking great. Hope you’re having a great time in Florida.
Have a great safe trip! The truck is awesome! Happy Thanksgiving y'all!
I'm praying and my fingers are crossed but not at the same time 😊 I have an old 89 F250 I get nervous driving it 80 miles to Nashville and back. I would be sweating going that far and something you built With really no seat time in it so far😅 As a truck driver forced to take hazmat test The guys are right you need to put those safety caps On your acetylene bottles
Just make sure you put the safety caps on the bottles, thanks BigAl California
Be safe. Glad y’all got the rig together! Can’t wait to see what’s next. Wish I had my rod together and was free to come join.
Thanks guys hope you are Hana good happy thanksgiving, thanks ,,praise Jesus Christ grace amen 🙏 thanks BigAl California
Safe travels! We’ll be watching you. Have a great time. Looking forward to the videos!✌️
I really get a kick from watching you guys. Thanks for the smiles
You guys have a safe trip and keep us with the great builds
Love the truck yall are Killin it with this thing, yall may have answered this but where is the 41 dodge.
Yes I am a Gangster,,lol,, Glad you love the chips they are a staple in Evansville along with Ski
Nice job
Enjoyed your video, keep up the great work and I will be looking forward to your next video
May Gods Blessings be with you always
Awesome truck, Hope you have a safe trip, but for God's sake remove the torch regulators along with your Argon bottle regulator and install the transport caps. Several have commented on the torches but the welder tank also needs capped. If you have already left for Daytona I am sure there will be several gas suppliers along route where you can get some. Enjoy watching your channel but you really need follow some safety practices.
The truck looks like it's running really well have a safe trip love the video you guys have a fun time and keep us in your thoughts thank you
Have a great and save trip 🙏💪✌️ the truck is awesome ❤God bless!
Cory you need to put the safety caps on those torch bottles. Anytime you transport them from your cart or anywhere. And I hope Hannah put some weight in that can so it doesn’t blow out of the holder. Ya’ll need to think about safety first when transporting stuff
The bottles need to be capped, secured and PLACARDED or the DOT Man gonna getchall.
In addition to DOT concerns, your personal well being is at stake. The way I understand it, one fitting broken off can cause a bomb like explosion, and the other makes it a bottle rocket and flys thru the air.
Yep! I don’t tend to ever call out mistakes but that’s a definite safety concern.
Carl you need to mind your own business
Cool rig/video.safe travels enjoy the show.
I'll follow along 😜 simply because I like the truck 🚛. Just started watching your content an find it very entertaining 😂. Good luck on your trip 👍 guys 🎉.
Great video as always prayers for a safe trip have fun in Daytona Beach
Love to watch your videos guys, don't ever stop to do what you doing!👍
P.s. I missing the bloopers, would be nice to see some.🙂
Y'all need to finish the rest of your new truck,LoveJim J&R mobile service and God Bless you and your pups ❤❤❤❤
Checking in with CWC injoy watching your videos.
I love the Turkey Run! Great event and a good time!
Awesome afternoon little brother and little sister another awesome adventure awesome as always yall have safe travels
Great vid as usual, enjoy the trip, best wishes from Scotland
Hannah, good job on those wheel bearings. Proud moment
Hey guys! Love watching you two work together!
Hannah I know it's a silly question, but what brand of boots do you wear?
Safe travels in FL... have fun!
Hey homies another great video you two together are a bomb never a dull moment for sure!!
We missed you at Daytona. We wanted to see that rig. Hope you guys had fun.
Great job on the truck. Be safe and enjoy the ride to Florida.
Great job keep up the great work love your videos thank you
Prayers for safe travels yall !!!! Please take your time !!!! Always enjoy your adventures !!!!
Great work, the truck looks awesome! Hey Cory, who makes your tan jacket with the red embroidered CWC?
You can always get bearing buddies the end of each axle once you have greased time originally just give a few squirts here and there
It appears to me that they do have bearing buddies I was wondering why they were greasing them.
Love the truck, good to see Hannah get down and dirty with those wheel bearings,I hate doing wheel bearings...
Thanks for sharing 😀👍
God bless you both and your in my prayers
Yeah a crowd.... When I was there in late 2016, I was told every Polar Express trip was booked a year in advance, and some were booked for the second year out.... I love French Lick/West Baden/Spring Valley/ Paoli. I have GOT to get back over there soon for a weekend or day trip.
We passed you guys on 75 in GA. We had the 69 4-door on a trailer. Hope to get to meet you guys in Daytona.
Stay safe you too...... Lon from Ohio... happy Thanksgiving...
Merry Christmas guys from Corpus Christi Texas 👍
Cory the truck looks amazing she has i good eye for what it turned be have a safe trip, the model guy.
Happy Thanksgiving 🍁🦃
Have a safe trip and fun time
Looking forward to the video 😎
Now that's one Cool looking Truck 👍👍
Hanna you are a dream wife !! Great job, safe trip guys ! Happy Thanksgiving !!
Very very goog,❤🤝,muy muy bien ,❤🤝,молодцы вы ребята ❤🤝,
You should really keep an eye on those cats whilst you are talking!! 😮 Super video guys thank you and good luck with Daytona...Love from the UK.
I think that drier just needs a check valve screwed in it to stop it after it purges. Kinda likes on a regular air compressor
Even if you take it as is, people will dig it. I still say paint the bumper and grill white. Probably the wheels, too, unless you're gonna put on some pretty chrome wheels.
Check for a leaking brake can. They can feed back and come out the exhaust. Pinch off the hose on the spring brake side o e at a time. Good luck
Cory is that a Mc Donald’s table you got in your kitchen,you’ll make the trip no worry’s,I run around in my pick 6.0 all the time with the same amount of tool you got in Hanahas welding truck cause I’m forever fixed shit for everyone I meet,me putting on good cloths are covered in grease with in 2 min.any way I love helping people and that’s how I roll much like ur self😂,Dan and Shelley ,Sask.Canada❤
I like your flatbed Coe truck .I want one!
You guys like them trucks, you should go over to what the rust, there is one over there with a service bed a v6 of all things .I think he said owner I selling all cheap alot of trucks but that one was very cool and had a crane on the back
Could Hanna shift not useing the clutch?that might make it easier for her🤠 2:28
I only use the clutch to start and stop. Easy to shift those without the clutch.
You guys are brave LOL
We late to the show. (Just in from deer camp) GREAT VIDEO !!! HAPPY THANKSGIVING to YALL TOO 🦃🦀🐟👍🏼🏁🏁🏁. What was the cat eating from the box?
Need an old Lincoln Shorthood welder for that truck.
Have a safe and fun trip.
What engine are you running? And the transmission? It looks like a lot of speeds! Great looking project. I wonder what miles per gallon you are getting.
DT466.
Cory safety glasses shield cannot replace an eye. Hope to meet up with you guys sometime safe trip. God bless frim Ontario Canada
Good luck and Happy Thanksgiving.
God speed safe travels enjoy
So cool when you opened that box and it had a 12 pack of ski they are really big in our area so the next time you go to lake cumberland and get close to Hodgenville you can have a ski and smell our butts from a mile away, your friends from Arrowhead BBQ!!
Safe travels guys 💪👍
great video & have a great trip drive safe
praying your trip goes well. Don't forget t have fun!
we have a similar bearing greaser in aus but instead of pushin it into a can of grease it has a grease nipple on it , just pump it up very cleen way to do it pushes all the old grease out the sides not into your can of grease
Looking good sure wish I could be there
48:48 the cats even got their treats, lol
Good luck be safe on your trip
love the truck 😊
Corey you really need to quit cutting by your body those grinders are no joke... Just trust me on this one. Accidents happen in the blink of the eye and can really be a bad deal. I just had one of those freak accidents happened to me and now I'm recovering from surgery on my left hand makes it real hard to do damn near anything like I'm used to. Thankfully I had a 96,000 surgery to put my hand back together and it will be a good year before I regain full use of it. Just please think about that. I would rather be an example then to see you have to suffer through a recovery process. I like your channel and I like the stuff you do.
Corey do you know that it's illegal to drive around with no caps on your oxy and acetylene tanks
Hannah noticed the Chevy in Roland that I like.
You should’ve talked to crossroads and got the rubber grommets for your tail lights, or got the ones that rivet on