Mike, 40 years as a contractor, and my crews and I have poured as much as 1,100 yards of concrete a day (monolithic) and I always stop and watch your videos. I respect your skills. I'm almost 70 and love how practical you are. Younger Craftsman/Craftswomen could learn a lot from you brother. Keep on cranking out the videos.
He is quoting one of your “Mike-verbs”. But he won’t “just get it done” sitting around on his can watching videos… lol. I miss seeing the proverbs on the outros, and I love the Castle Song !
Brother it is another fine lesson for everyone who doesn't have your EXPERIENCE. You alway provide the best info . I did look up the psi for Fast -Setting Quikrete for those interesed: it was 7 days- 2500 psi 28 days 4000 psi. As always you videos help me around my list of projects. Thank Brother ... God Bless Ernie
The fast setting concrete in the red bag according to Lowe's website it is a 4,000 PSI quick setting concrete and it will set in 20 to 40 minutes and fully cure and 48 to 72 hours. Some websites claim it will reach 4,000 psi in about 30 days but if you're doing posts or something that's going to put a lot of pressure like a flagpole they recommend two to three days before erecting your flagpole. I hope this helps and by the way I have used this quick setting concrete and literally waited 2 days and have had no issues with my flagpole.@@MikeHaduck
Thanks Mike. I installed mailboxes in the past. I now have a walkway I need to repair. Your videos are informative and gives us the confidence on which products to use
Agree with you Mike a hundred percent. Use the fast set for small jobs and work fast. It's great for getting those kinda jobs done quick. Have everything ready because if you don't you're gonna be sorry. Your mold work looked great. Wish you could do some video's on that subject. All The Best
so informative! I recently just patched a portion of the sidewalk because the City & County deemed it "wasn't safe!" Beforehand, i watched a lot of your videos and it had definitely helped! Thanks!
Mike, i remember learning some of these lessons from my dad back in the 1960s & 70s. They still hold true today, I live down the road from you in Plains, would be my honor to buy you lunch one day,. Thanks for sharing your wisdom and preserving this valuable information in your videos. They will be your legacy. Rick D.
Makes you appreciate why this work as expensive as it can be often. Love the old school way. Seems way more solid and will last for many many years vs the short cuts these days. Love your work Mike!
Hey Mike, one thing I have learnt from watching your channel is don't mess around with quick set. You have to have everything ready to go before you mix and work fast. I have recently seen SpaceX using a concrete mix called Fondag ? have you heard of it ? it is supposed to withstand extreme temperatures (high or low). Anyway, thanks Mike.
Thanks Mike. First time I've watched one of your videos. There's a priceless library of experience stored in that brain of yours. I appreciate you sharing it!
This was so informative and not long dragged out. Thank you. Wish you could make one showing how to use concrete bonding adhesive acrylic fortifier with quikrete quick setting cement.
I'm still getting used to New School. I'm in Iowa. So just like Pennsylvania we have freeze and thaw The premix stuff makes me a little nervous. On strength. So like you I like to throw a shovel of Portland in it to wake it up a little bit. Good video.
Thank you for all the work that you've done. Your videos gave me the courage to install a window in my basement thank you so much. I sent you a little money through PayPal keep up the good work!
I have designed so many: footings, pad footings, concrete foundation walls, reinforced concrete, piles, piers, foundation pads, I have lost count from a structural engineer view. Mike you have provided me with a lot of techniques in the methods for installation from a practical standpoint for repairs and understanding of concrete workings. One thing to mention is that anyone that does undertake the installation of the premix, bag condrete needs to know the amount of concrete one person would be able to handle in a day. I believe that eight bags may be about as much as one solid individual would be able to mix and install in a long day from mixing to finishing for a four inch thickness. In doing repair work or thin coats a person may be able to handle a couple of bags. Do you have any rules of thumb that you follow for an individual. Any thoughts on providing some advice on doing a dry install?
Hi Carmen, I am not a fan of the dry laid, it will fall apart in my area, but your right about knowing how much you can do in a day, sometimes I mix the regular with the fast setting, thanks Mike
@@MikeHaduck soooo ... always meant to ask you .. why dont you create a little chord or intro. Strum a chord someday and if you find the sound have it in a vid. Bring all these talents together and have fun with it. Maybe?
I am liking your video Mike. What I am wondering is how hydraulic cement is made ?? Could I use the fast setting stuff and add 50 percent more of Portland Cement ?? Please guide me Sir. I respect your ways of knowledge and the old school ways of School of Hard Knocks. Everything I learned over the years was HARD KNOCKS. Have a great day MASTERCRAFTSMAN. I am glad to have found you Sir.
Hi, I can't say what to use, I only show what I used in each of my videos for my area. every situation is different and every masons use their own mix. Thanks Mike
I am sorry for not being more clear with my question on hydraulic cement. I want to waterproof my basement that has 8 inch cinder block. Could I also waterproof the inside of the blocks with aircreet as shown on youtube videos or should I use Portland and milled styrofoam ?? How would you handle the job Mike ?? Thanks@@MikeHaduck
Howdy from Dallas. Putting the bags of quikcrete in plastic bags is a great tip. With our heat and humidity, I've seen many bags turn into hardened concrete chunks of stone in no time. Another tip: Never store concrete bags on concrete; only wood or plastic. The wicking... - The new QUIKRETE regular bag formula is crap. They now use sharp crushed chat in my area, and almost no sand.. I liked the old formula; it was easy to skree and finish. Now-a-days, I almost always have to add Portland to get any cream at all. - Can you make a video about "Type N" ? I would appreciate it Mike. -
Hi Mike, thank you again for always educating us so we can understand and then make informed decisions about getting concrete done or if we want to do it ourselves. I have a question regarding use of product in various locations. You always make clear that one must consider one's location. So here's my question - would you consider Chicago weather conditions comparable to your location N E Pennsylvannia? We have the 4 seasons, freeze thaw, etc. It's difficult to find people who want to really do any work - say the least about quality work so I'm trying to do some things myself. I'm a retired teacher and I know I can learn and best I try to do it myself -when I can - and I want the knowledge so I can do a quality job for myself here in Chicago. Again, thanks so much for sharing your knowledge. I truly appreciate it. p.s. - I think I've watched every video on your channel -some more than once and the travel video where you show the historical techniques in other countries as well. I really enjoy them all!!!
Thanks Mike, Bless you and your family. Grateful to have found and immersed myself in your wisdom. I pray every family has a Mike Haduck. This world would benefit greatly. Thank you. I have a small project that I could use your advice. Pretty straight forward, I have done research however experience like yours is priceless in comparison. My wife reminds me to ask for help, I am asking. Not something I do. 30 min of your time via FaceTime to see the area? Id pay you for it or donate to a charity of your choosing. thank you
@@MikeHaduck old stone mason from UK been watching TH-cam for two and a half years now Mike you know your work and and about stone mason not many good tradesman left now 👍
Mike, thanks so much for sharing your experience. I've learned a ton from you. You mentioned using plastic bags to keep the mix from absorbing humidity. What type of bag do you recommend that will provide a tight enough seal?
Thanks mike been watching you for a long time and I trust you mike will shoot you straight on cement always. His methods work in most areas and climates. I have tried
Mike first I have learned a lot from watching you and enjoy your videos. I'm laying concrete block making a base for a pizza oven. It's fairly heavy around 500 lbs. I'm going to pour concrete in the holes of the blocks but do I need to fill all the holes or can I fill the perimeter holes.
Hi Troy, I can't say unless I seen it, but with pizza ovens there is a lot of expansion and contraction with the heat and cold, expect some hair cracks, thanks Mike
Hey Mike, just seen some videos pop up on other DIY channels about dry pouring concrete, the pre-mixed type. Would be good to get a video maybe on your opinion on this.
Hi, I have done that on my concrete stoop videos and concrete sidewalk videos. A lot depends on the outside weather, mix up a little sample first and see. Thanks, Mike
Hi Mike. Ive been watching your videos for years and am about to pour a shed slab soon. I've heard you talk about steel in concrete many times before but was wondering what you think about galvanized concrete mesh? It is sold in Western Australia mainly for limestone pads and around swimming pools. Many thanks. Ryan 🙏
Hi Ryan, I worry about thick rebar, but not to much about wire or thin tebar in a slab for a small shed, in houses many codes would require it,, so it's what the local codes require and what kind of area you are pouring it in, I hope it helps mike
Hello Thank you for All the information you have provided. Found your channel about 2 months ago and I've been watching your videos non stop. Question, what happens if you much the fast drying the same way like old school. 2 sand to 1 of the fast setting cement, and and a good scoop of Portland cement to all of it? Appreciate any feedback. Thank you in advance.
Thank you for your reply. I really appreciate it. I would love to have you come by and work with me on a job, but I'm in Montreal. I've learned a lot from your videos. You have given me the confidence to tackle jobs I would have been too worried about doing myself before. I tend to add a little Portland to everything I mix now just to add some extra strength bc of the different weather conditions we get here, especially since our winters are really cold and we have lots of freezing and expansion going on. Thanks again for all the great videos and content you put out. Take care. Gerry.@@MikeHaduck
Mike, Awesome video. So, I have a few questions. I'm an amateur concrete guy but also from NEPA (Wyoming PA). I'm going to be attempting to make my own pavers. I planned on using the fast setting stuff but you said it's about 4000 psi. What psi is "waterproof"? Is that what you are doing with the Portland? R u upping the psi? How do I know how much or what to add to make them waterproof to prevent cracks due to the freeze / thaw that happens here. Much appreciate your video!!❤ liked and subscribed!
Hi , I am not a big fan of the bag mixes and I don't know how long they been in the wherehouse so an extra trowel full gives me a little insurance it's strong enough, concrete is not entirely water proof and the psi is iffy, and just a compresive strenght rating, my opinion , thanks Mike
@nevrstriptools3418 hi if you want to make it water resistant I would wait thirty days an use a sealant, read directions on sealant, but sometimes sealants could be slippery, Mike
Hi BeeRay,,, I have a video out called, " how I make concrete wall caps" Mike haduck, I started adding a little more Portland to each mix though, to make it a bit stronger, thanks Mike
@@MikeHaduck Thanks Mike, thats a good method of casting, especially using the durawall, wouldnt have thought of that. I guess my other question is do you have any kind of mix you would recommend for doing something like this that can withstand heat, like a refractory mix? I have heard of using fireclay, perlite, and portland but not sure what rations might be...
You mentioned about putting down a concrete base for pavers. I live in western Pennsylvania... How deep do you put a base for pavers so they don't heave? I feel like it would have to be pretty deep (36").
Mike, what product/ mix do you recommend to vertical stamp design on cinderblock/concrete block? I'm planning on doing outdoor kitchen want to stamp it to look like stones.
Mike, I need your opinion. If you were to do a brick job in building a 36 inch low garden wall double-sided what type of mortar S would you use in your area? Does it matter if the brand is Sakrete, Quikrete or Amerimix? Anything advise you could give will be greatly appreciate it my friend.
Hi Maddog, I wouldn't think the manufacturer would matter and I would probably use S mortar, but garden walls and planters always seem to be a future problem because of the weather and freezing, thanks Mike
@@MikeHaduck thank you Mike again. I’m sorry I miss typed it’s not a garden wall. It’s a 36 inch brick wall with brick on both sides with a lime stone caps on top running about 24 feet on one side by 36 feet on the other. It’s basically lining my driveway. Also, do you recommend lime stone as the Or blue stone? Any preference? Does water go through either one of them?
What do you use for deck post? I gotta repair mine soon. My Dad used concrete and it pushed up the post. I don't think he dug below the frost line. Phila,pa
Hello, can somebody explain why I would use Rapid Set Cement All over this? Cement all is 3-4x as expensive. Also thanks for the education Mike. I'm a white collar guy, but my hillbilly roots make me want to DIY as much as I can
Sir; I am repairing a small step to the door sill on my house. I am wondering what I can do to help my very small pour be successful in the 35-40 degree weather? It should only take 1/4 to 1/3 of a bag of concrete.
@@MikeHaduck thank you I found it, if I am pouring a small area, 3ft by 2in by 2in, and the temperature is high 50 low 30, should I use liquid accesslorator? I am planning on using hot water
Quikrete makes a concrete sealer that also helps in the curing process, but like in my concrete sidewalk videos I rarely use it, I usually cover it for a few days and keep it moist, thanks Mike
Here are stats from Quikrete for strength. Setting time, ASTM C191 20 - 40 min. Compressive strength, ASTM C39 2 hrs 400 psi (2.8 MPa) 24 hrs 1000 psi (6.9 MPa) 7 days 2500 psi (17.2 MPa) 28 days 4000 psi (27.6 MPa) Just used it to put in a sleeve for a 25' flag-pole (9 bags).
As Mike says ,you do NOT need concrete to secure a post into the ground : back in the 🇬🇧1970s , the old timers showed me that all you needed to do was set your post in the hole and then back fill it just a little at a time and ram the stuff down really hard as you went . I have set nine inch oak posts like this and hung a five bar gate on them quite successfully . 🇬🇧
Hi CT, a problem with these products is that you don't know how long they been sitting around, it's best to make sure it's fresh and sometimes I might add a little more Portland for certain projects thanks Mike
Anyone know how this product compares to Rapidset Concrete Mix other than the cost, about twice as much for the Rapidset at $15 for each 60lb bag? I am considering using this to repair a 4ft x 5ft section of my driveway.
It says 'without mixing' so I do not understand why you are mixing with water before use. I am a total concrete newbie, about to buy this to set my clothesline pole. thanks!
Hi luv, the directions say "add water and mix thoroughly " any other way is substandard and misleading, now some fence companies etc, just pour it in the whole around the post and then wet it, something like that is acceptable because it's below ground and dosent require a professional concrete finish, the oldtimers just filled around the post with rocks, what is reasonable for the situation, thanks Mike
Hi Brian, I am still surprised I am still alive after going through the service plus all the things I been through, 70 years old and still kicking, thanks Mike
Mike, 40 years as a contractor, and my crews and I have poured as much as 1,100 yards of concrete a day (monolithic) and I always stop and watch your videos. I respect your skills. I'm almost 70 and love how practical you are. Younger Craftsman/Craftswomen could learn a lot from you brother. Keep on cranking out the videos.
Thanks Mysterion, I appreciate hearing that from a professional, thanks Mike
It’s no big deal if you learn from this man.
Thanks Doug, Mike
@@MikeHaduck my pleasure Mike
He is quoting one of your “Mike-verbs”. But he won’t “just get it done” sitting around on his can watching videos… lol.
I miss seeing the proverbs on the outros, and I love the Castle Song !
This man is a treasure. His tips and advice are invaluable!
Thanks Zazz, Mike
Brother it is another fine lesson for everyone who doesn't have your EXPERIENCE. You alway provide the best info . I did look up the psi for Fast -Setting Quikrete for those interesed: it was 7 days- 2500 psi 28 days 4000 psi. As always you videos help me around my list of projects. Thank Brother ...
God Bless Ernie
Thanks Ernie, God bless, Mike
Another excellent lesson from Mike, it’s always filled with facts and how things really are.
Thanks Clint. MIKE
Thanks for giving me the confidence to work with concrete! I love your channel!
Thanks Kari, Mike
The fast setting concrete in the red bag according to Lowe's website it is a 4,000 PSI quick setting concrete and it will set in 20 to 40 minutes and fully cure and 48 to 72 hours. Some websites claim it will reach 4,000 psi in about 30 days but if you're doing posts or something that's going to put a lot of pressure like a flagpole they recommend two to three days before erecting your flagpole. I hope this helps and by the way I have used this quick setting concrete and literally waited 2 days and have had no issues with my flagpole.@@MikeHaduck
Huge respect to you. Another amazing video anyone can understand. Glad you mentioned about regions and possible code changes for some uses.
Thanks Cosmos. MIKE
Thanks Mike. I installed mailboxes in the past. I now have a walkway I need to repair. Your videos are informative and gives us the confidence on which products to use
Thanks Richatd, Mike
Agree with you Mike a hundred percent. Use the fast set for small jobs and work fast. It's great for getting those kinda jobs done quick. Have everything ready because if you don't you're gonna be sorry. Your mold work looked great. Wish you could do some video's on that subject. All The Best
Thanks Dune, Mike
so informative! I recently just patched a portion of the sidewalk because the City & County deemed it "wasn't safe!" Beforehand, i watched a lot of your videos and it had definitely helped! Thanks!
Thanks, Mike
Mike, I love your videos! Your calm demeanor and teaching style is great. Thanks
Thanks Kevin, Mike
Mike, i remember learning some of these lessons from my dad back in the 1960s & 70s. They still hold true today, I live down the road from you in Plains, would be my honor to buy you lunch one day,. Thanks for sharing your wisdom and preserving this valuable information in your videos. They will be your legacy.
Rick D.
Thanks Rick, I am in Florida now but I appreciate it, Mike
Makes you appreciate why this work as expensive as it can be often. Love the old school way. Seems way more solid and will last for many many years vs the short cuts these days. Love your work Mike!
Thanks Mmagzo,, Mike
Mike Haduck is a living legend this guy is friggin hero material
Thanks Danzig, I appreciate the kind words, Mike
Each one of those jobs you showed looked good Mike. It's not easy making work look first class all the time, but you do.
Thanks Guill, Mike
Best guy to learn from for concrete and mortar jobs.
Thanks Jack, Mike
I always wondered how they did wall caps, I thought they poured them in place.
Hi Steve, sometimes they do, Mike
Hey Mike, one thing I have learnt from watching your channel is don't mess around with quick set. You have to have everything ready to go before you mix and work fast. I have recently seen SpaceX using a concrete mix called Fondag ? have you heard of it ? it is supposed to withstand extreme temperatures (high or low). Anyway, thanks Mike.
Hi Darren, I haven't heard of it, so many products anymore, thanks Mike
Thanks Mike. First time I've watched one of your videos. There's a priceless library of experience stored in that brain of yours. I appreciate you sharing it!
Thanks Pat, I appreciate it, Mike
This was so informative and not long dragged out. Thank you. Wish you could make one showing how to use concrete bonding adhesive acrylic fortifier with quikrete quick setting cement.
Hi Andrea, I rarely if ever use it, I show what I use in almost all my videos, thanks, Mike
I'm still getting used to New School. I'm in Iowa. So just like Pennsylvania we have freeze and thaw The premix stuff makes me a little nervous. On strength. So like you I like to throw a shovel of Portland in it to wake it up a little bit. Good video.
Thanks Roger, Mike
Thank you for all the work that you've done. Your videos gave me the courage to install a window in my basement thank you so much. I sent you a little money through PayPal keep up the good work!
Thanks Keith, I appreciate it, I got the notice from PayPal, I will use it for camera equipment, Thanks again, Mike
Thank you Mike .. your videos are invaluable.
Thanks, Mike
Mr. Haduck, I so enjoy learning from you. I sunk 4 posts into this product. Wish I'd known to keep it covered & wet for a few days to cure properly.
Thanks, Mike
Thanks again for your calm down home explanations of concrete work.
Thanks Freddy, Mike
I have designed so many: footings, pad footings, concrete foundation walls, reinforced concrete, piles, piers, foundation pads, I have lost count from a structural engineer view. Mike you have provided me with a lot of techniques in the methods for installation from a practical standpoint for repairs and understanding of concrete workings. One thing to mention is that anyone that does undertake the installation of the premix, bag condrete needs to know the amount of concrete one person would be able to handle in a day. I believe that eight bags may be about as much as one solid individual would be able to mix and install in a long day from mixing to finishing for a four inch thickness. In doing repair work or thin coats a person may be able to handle a couple of bags. Do you have any rules of thumb that you follow for an individual.
Any thoughts on providing some advice on doing a dry install?
Hi Carmen, I am not a fan of the dry laid, it will fall apart in my area, but your right about knowing how much you can do in a day, sometimes I mix the regular with the fast setting, thanks Mike
You videos are superb and full with soooo much education. Thanks always Mike!! Hope your week has been perfect and you are making music
Thanks Thor, still with the music, Mike
@@MikeHaduck soooo ... always meant to ask you .. why dont you create a little chord or intro. Strum a chord someday and if you find the sound have it in a vid. Bring all these talents together and have fun with it. Maybe?
I am liking your video Mike. What I am wondering is how hydraulic cement is made ?? Could I use the fast setting stuff and add 50 percent more of Portland Cement ?? Please guide me Sir. I respect your ways of knowledge and the old school ways of School of Hard Knocks. Everything I learned over the years was HARD KNOCKS.
Have a great day MASTERCRAFTSMAN. I am glad to have found you Sir.
Hi, I can't say what to use, I only show what I used in each of my videos for my area. every situation is different and every masons use their own mix. Thanks Mike
WOULD you be able to tell me your mix for hydraulic cement Mike ?? Thanks@@MikeHaduck
I am sorry for not being more clear with my question on hydraulic cement. I want to waterproof my basement that has 8 inch cinder block. Could I also waterproof the inside of the blocks with aircreet as shown on youtube videos or should I use Portland and milled styrofoam ?? How would you handle the job Mike ?? Thanks@@MikeHaduck
Hi, I did a video called " basement water problem solutions, Mike haduck, I think I say it best there, thanks Mike
I will check it out today. Thanks.@@MikeHaduck
I always appreciate the way you break it down.
Thanks Sean, Mike
Great stuff Mike.
Thanks Denis, Mike
Howdy from Dallas. Putting the bags of quikcrete in plastic bags is a great tip. With our heat and humidity, I've seen many bags turn into hardened concrete chunks of stone in no time. Another tip: Never store concrete bags on concrete; only wood or plastic. The wicking...
-
The new QUIKRETE regular bag formula is crap. They now use sharp crushed chat in my area, and almost no sand.. I liked the old formula; it was easy to skree and finish. Now-a-days, I almost always have to add Portland to get any cream at all.
-
Can you make a video about "Type N" ?
I would appreciate it Mike.
-
Thanks Tom, I did a video called mason mix type S - N Mike
Hi Mike, thank you again for always educating us so we can understand and then make informed decisions about getting concrete done or if we want to do it ourselves. I have a question regarding use of product in various locations. You always make clear that one must consider one's location. So here's my question - would you consider Chicago weather conditions comparable to your location N E Pennsylvannia? We have the 4 seasons, freeze thaw, etc. It's difficult to find people who want to really do any work - say the least about quality work so I'm trying to do some things myself. I'm a retired teacher and I know I can learn and best I try to do it myself -when I can - and I want the knowledge so I can do a quality job for myself here in Chicago. Again, thanks so much for sharing your knowledge. I truly appreciate it. p.s. - I think I've watched every video on your channel -some more than once and the travel video where you show the historical techniques in other countries as well. I really enjoy them all!!!
Hi Nyla, I went to booth camp in Chicago, I would say it's close to the same weather. Thanks Mike
@@MikeHaduck thank you for your reply.
Your opinion maters a lot. It's equal to a manual, on what sement to use.
Ha e great one Sir.
//Richard
Thanks again Richard, Mike
Mike, Thank you for the review, much appreciated, Len
Thanks Len, Mike
Thanks Mike, Bless you and your family. Grateful to have found and immersed myself in your wisdom. I pray every family has a Mike Haduck. This world would benefit greatly. Thank you. I have a small project that I could use your advice. Pretty straight forward, I have done research however experience like yours is priceless in comparison. My wife reminds me to ask for help, I am asking. Not something I do. 30 min of your time via FaceTime to see the area? Id pay you for it or donate to a charity of your choosing. thank you
Hi, I appreciate you asking but I can't give advice over the phone or internet. Thanks Mike
Keep up Great work Mike you are.old School and you never stop learning 🍻👍
Thanks Tom, Mike
@@MikeHaduck old stone mason from UK been watching TH-cam for two and a half years now Mike you know your work and and about stone mason not many good tradesman left now 👍
Thanks Tom, I appreciate the kind words, Mike
Mike, thanks so much for sharing your experience. I've learned a ton from you. You mentioned using plastic bags to keep the mix from absorbing humidity. What type of bag do you recommend that will provide a tight enough seal?
Hi Heath, I just use a cheap garbage bag, anything that works, Mike
Good info. Thanks Mike!
Thanks Charles, Mike
Great tip on adding extra Portland. Thx.
Thanks Scott, Mike
Thanks for the info Mike. All the best.
Thanks JP, Mike
Thanks mike been watching you for a long time and I trust you mike will shoot you straight on cement always. His methods work in most areas and climates. I have tried
Thanks George, I appreciate it, Mike
Mike first I have learned a lot from watching you and enjoy your videos. I'm laying concrete block making a base for a pizza oven. It's fairly heavy around 500 lbs. I'm going to pour concrete in the holes of the blocks but do I need to fill all the holes or can I fill the perimeter holes.
Hi Troy, I can't say unless I seen it, but with pizza ovens there is a lot of expansion and contraction with the heat and cold, expect some hair cracks, thanks Mike
I still wish that the cement companies would sell this stuff in plastic buckets instead of that absorbent paper
Hi Joe, I hear you, Mike
Great content!!!
Yanks Dale, Mike
An excellent job! Answered my questions.
Thanks Will, Mike
Hey Mike, just seen some videos pop up on other DIY channels about dry pouring concrete, the pre-mixed type. Would be good to get a video maybe on your opinion on this.
Hi Allen, I will have to get to it, It would not hold up in my area, thanks Mike
@@MikeHaduck No I don't think its ideal either!
Great job Mike! Getting near the end...I was like he must have struck a deal with quickcrete. Then you said you didn't. Lol. Good review
Thanks Gibson, Mike
Thank you Mike. Your videos have been so helpful.
Thanks Nicholas, Mike
old schooler allows for enjoyment & freedom Thank you mike H
Thanks Dave, Mike
If you add a bag of fast setting to a bag of reg concrete mix, how quick do you think that wiukd set up? 2 hrs?
Hi, I have done that on my concrete stoop videos and concrete sidewalk videos. A lot depends on the outside weather, mix up a little sample first and see. Thanks, Mike
Hi Mike. Ive been watching your videos for years and am about to pour a shed slab soon. I've heard you talk about steel in concrete many times before but was wondering what you think about galvanized concrete mesh? It is sold in Western Australia mainly for limestone pads and around swimming pools.
Many thanks. Ryan 🙏
Hi Ryan, I worry about thick rebar, but not to much about wire or thin tebar in a slab for a small shed, in houses many codes would require it,, so it's what the local codes require and what kind of area you are pouring it in, I hope it helps mike
@@MikeHaduck Thanks for getting back to me Mike. Much appreciated 🙏😊
Hello
Thank you for All the information you have provided. Found your channel about 2 months ago and I've been watching your videos non stop.
Question, what happens if you much the fast drying the same way like old school.
2 sand to 1 of the fast setting cement, and and a good scoop of Portland cement to all of it?
Appreciate any feedback.
Thank you in advance.
Hi, I usually show what I use in each case, so it's hard to say unless I was on the job, thanks Mike
Thank you for your reply. I really appreciate it. I would love to have you come by and work with me on a job, but I'm in Montreal. I've learned a lot from your videos. You have given me the confidence to tackle jobs I would have been too worried about doing myself before. I tend to add a little Portland to everything I mix now just to add some extra strength bc of the different weather conditions we get here, especially since our winters are really cold and we have lots of freezing and expansion going on. Thanks again for all the great videos and content you put out. Take care. Gerry.@@MikeHaduck
Thanks Gerry, I appreciate hearing that, Mike
Mike, Awesome video. So, I have a few questions. I'm an amateur concrete guy but also from NEPA (Wyoming PA). I'm going to be attempting to make my own pavers. I planned on using the fast setting stuff but you said it's about 4000 psi. What psi is "waterproof"? Is that what you are doing with the Portland? R u upping the psi? How do I know how much or what to add to make them waterproof to prevent cracks due to the freeze / thaw that happens here. Much appreciate your video!!❤ liked and subscribed!
Hi , I am not a big fan of the bag mixes and I don't know how long they been in the wherehouse so an extra trowel full gives me a little insurance it's strong enough, concrete is not entirely water proof and the psi is iffy, and just a compresive strenght rating, my opinion , thanks Mike
@MikeHaduck how do I make it water proof?? Also, how can I hire u to do masonry work? What's ur number?
@nevrstriptools3418 hi if you want to make it water resistant I would wait thirty days an use a sealant, read directions on sealant, but sometimes sealants could be slippery, Mike
Thanks uncle mike for the advice 👍🙏
Thanks Juan, Mike
Would you use the fast setting for fence polls? Specifically, when doing vinyl fence installations?
Hi Mazele,, I don't do fences but I know some installers use it , Mike
Mike, do you ever do anything with refractories? I’m looking for a recipe for a castable mix in particular thanks.
Hi BeeRay,,, I have a video out called, " how I make concrete wall caps" Mike haduck, I started adding a little more Portland to each mix though, to make it a bit stronger, thanks Mike
@@MikeHaduck Thanks Mike, thats a good method of casting, especially using the durawall, wouldnt have thought of that. I guess my other question is do you have any kind of mix you would recommend for doing something like this that can withstand heat, like a refractory mix? I have heard of using fireclay, perlite, and portland but not sure what rations might be...
Mike, for the quickrete fast setting concrete can you use the Rapid Set flow control or set control packets to slow down the hardening time?
Hi Rayjay, I don't use it, I just mix what I need and use it quickly, thanks, Mike
Ain't no beauty contest....may the force be with you!!❤😂🤠🐎
Thanks Ian, Mike
Concrete review??? More like a concrete class!!! Excellent video
Thanks ed,, Mike
Review a dry pour pad please
Hi, I will be doing it within the next few months , thanks Mike
Great product , but very expensive. Great video Mike .
Thanks Rocco, Mike
Mike, what's in that stuff that makes it fast setting?
Hi Henry, I have a idea but will leave that question up to the manufacturer, thanks Mike
You mentioned about putting down a concrete base for pavers. I live in western Pennsylvania... How deep do you put a base for pavers so they don't heave? I feel like it would have to be pretty deep (36").
Hi Steven, I got a whole playlist called " paver Installation " Mike haduck I show it most of the circumstances, thanks Mike
Mike, what product/ mix do you recommend to vertical stamp design on cinderblock/concrete block? I'm planning on doing outdoor kitchen want to stamp it to look like stones.
Hi David, I don't stamp anything to look like stone, I do have a series " stone veneer installation " that might help, thanks Mike
Mike, I need your opinion. If you were to do a brick job in building a 36 inch low garden wall double-sided what type of mortar S would you use in your area? Does it matter if the brand is Sakrete, Quikrete or Amerimix? Anything advise you could give will be greatly appreciate it my friend.
Hi Maddog, I wouldn't think the manufacturer would matter and I would probably use S mortar, but garden walls and planters always seem to be a future problem because of the weather and freezing, thanks Mike
@@MikeHaduck thank you Mike again. I’m sorry I miss typed it’s not a garden wall. It’s a 36 inch brick wall with brick on both sides with a lime stone caps on top running about 24 feet on one side by 36 feet on the other. It’s basically lining my driveway. Also, do you recommend lime stone as the Or blue stone? Any preference? Does water go through either one of them?
What do you use for deck post? I gotta repair mine soon. My Dad used concrete and it pushed up the post. I don't think he dug below the frost line. Phila,pa
Hi Jacob, I usually show what I use in each video, thanks Mike
I wonder what they add to it to make it set so fast.
Hi Das, I would ask the manufacturer but I heard a few things, thanks Mike
Good video again Mike thanks
Thanks Matt, Mike
Hello, can somebody explain why I would use Rapid Set Cement All over this? Cement all is 3-4x as expensive. Also thanks for the education Mike. I'm a white collar guy, but my hillbilly roots make me want to DIY as much as I can
Hi ,it all depends what your doing, I show what I used in each circumstance, thanks Mike
Sir; I am repairing a small step to the door sill on my house. I am wondering what I can do to help my very small pour be successful in the 35-40 degree weather? It should only take 1/4 to 1/3 of a bag of concrete.
Hi code 3, I have videos on concrete repair and others on tips and tricks, Mike haduck, I hope it helps, thanks Mike
@@MikeHaduck I didn’t find a video about pouring in cold weather, do you recall which video that might be in?
Hi it's called " concrete ,brick or block in freezing temperatures, " Mike haduck,
@@MikeHaduck thank you I found it, if I am pouring a small area, 3ft by 2in by 2in, and the temperature is high 50 low 30, should I use liquid accesslorator? I am planning on using hot water
Mike, tanks for sharing...(is that your, "real" hair)
Hi Tom, yep real hair, it keeps growing, Mike
Hello, could you please tell me what cure sealer you used? Was it just water?
Quikrete makes a concrete sealer that also helps in the curing process, but like in my concrete sidewalk videos I rarely use it, I usually cover it for a few days and keep it moist, thanks Mike
Mike haduck Is a pilar of the masonry community. He’s also looks like Harrison for but produces his own films without Hollywood
Thanks George, he does look like me, lol, Mike
Here are stats from Quikrete for strength.
Setting time, ASTM C191 20 - 40 min.
Compressive strength, ASTM C39
2 hrs 400 psi (2.8 MPa)
24 hrs 1000 psi (6.9 MPa)
7 days 2500 psi (17.2 MPa)
28 days 4000 psi (27.6 MPa)
Just used it to put in a sleeve for a 25' flag-pole (9 bags).
Thanks Brian, I just took a screenshot of it, I think set time would more depend on temp and sunshine, other than that ,good info, thanks. Mike
Fantastic video 👌. Stay safe and God bless you always 🙏😇
Thanks Lizza, God bless, Mike
I value your opinion.
Thanks Thomas, Mike
What do you recommend for sealer for sidewalk? I'm in PA also if that makes a difference.
Cure n seal works well
Hi Jamie, I am not big on sealers, depends on what you are using them for, thanks Mike
Thank you. Now I know that the Fast Set is made w Portland Cement.
Thanks, Mike
As Mike says ,you do NOT need concrete to secure a post into the ground : back in the 🇬🇧1970s , the old timers showed me that all you needed to do was set your post in the hole and then back fill it just a little at a time and ram the stuff down really hard as you went . I have set nine inch oak posts like this and hung a five bar gate on them quite successfully . 🇬🇧
Hi barker, I agree, the old timers would pack rocks around it in our area, thanks Mike
I have used both I am in Alabama but I have used there mortar mix but it seems to me there is to much sand it
Hi Chip, in many instances I agree, I usually add a trowel of Portland, thanks Mike
I found it, the pdf info about all their products says, 4000 PSA at 28 days for this one
Hi CT, a problem with these products is that you don't know how long they been sitting around, it's best to make sure it's fresh and sometimes I might add a little more Portland for certain projects thanks Mike
For QUIKRETE® Fast-Setting Concrete Mix (No. 1004)
They list:
Compressive strength, ASTM C39 2 hrs 400 psi (2.8 MPa)
24 hrs 1000 psi (6.9 MPa)
7 days 2500 psi (17.2 MPa)
28 days 4000 psi (27.6 MPa)
Thanks, I wish they put that and more on the package. MIKE
I Need you to come down and fix a few small jobs for me wish I can send you photos
Hi, I appreciate it but can't take on any more work, Thanks for asking, Mike
@@MikeHaduck understandable thank you mike
Where in NE PA are you located?
Hi Judy, I actually live in Florida, thanks Mike
@@MikeHaduck I thought you mentioned NE pa in the video.
I recently moved, but still have a lot of videos I haven't put out yet, thanks Mike
👍👍👍Thank you.
Thanks Pete, Mike
What makes it "Fast Setting"?
Hi Vintage, I kind of know but the Manufacturer is best to answer that, thanks Mike
Anyone know how this product compares to Rapidset Concrete Mix other than the cost, about twice as much for the Rapidset at $15 for each 60lb bag?
I am considering using this to repair a 4ft x 5ft section of my driveway.
Hi Colin, I have a playlist called " concrete repair & patches Mike haduck, I show what I use in each circumstance, thanks Mike
@@MikeHaduck Thanks Mike, you are helping to build up my confidence for this type of project, never tried this before.
I think you have to be confident about what you're doing, or a pro like Mike, to use "fast setting" concrete mix.
Thanks Juliet, Mike
It says 'without mixing' so I do not understand why you are mixing with water before use. I am a total concrete newbie, about to buy this to set my clothesline pole. thanks!
Hi luv, the directions say "add water and mix thoroughly " any other way is substandard and misleading, now some fence companies etc, just pour it in the whole around the post and then wet it, something like that is acceptable because it's below ground and dosent require a professional concrete finish, the oldtimers just filled around the post with rocks, what is reasonable for the situation, thanks Mike
I think I am too slow for fast setting concrete i would wind up with my trowel seized into it.
Thanks Greg, Mike
how do people not get cancer breathing all that dust in...
Hi Brian, I am still surprised I am still alive after going through the service plus all the things I been through, 70 years old and still kicking, thanks Mike
#richlove 🤛🏻
Thanks, Mike
😅
Thanks, Mike
No big deal!
Thanks Joey, Mike
ha ha..if they give the ingredient then people will make their own!! they think people are dumb.
Thanks Sue, Mike