Hi what do you reckon is the best way to squeegee round an expelair in a kitchen or bathroom window when there's less than 6 inch from the top of the expelair to the top edge of the glass to try and avoid leaving lines 🤔
You could wet it up a bit with your cleaning solution then polish with a good glass microfibre cloth. That's the easiest way. You can squeege round it but that is a bit tricky for most. Hope that helps
Without watching you it's not easy to say exactly. Could be too much soap, or your applicator was too dry. Make sure your applicator is properly saturated and add a thin line of soap or just a couple of drops, then rub that in and blade it off.
Great job !!! what soap do u use
Any dish washing liquid is normally ok. I use fairy liquid
Great!! Thank you so much!!!
Very welcome 😊
Hi what do you reckon is the best way to squeegee round an expelair in a kitchen or bathroom window when there's less than 6 inch from the top of the expelair to the top edge of the glass to try and avoid leaving lines 🤔
You could wet it up a bit with your cleaning solution then polish with a good glass microfibre cloth. That's the easiest way. You can squeege round it but that is a bit tricky for most. Hope that helps
Hi m8 what’s your favourite squeegee and size if you had just one for houses thx?
Currently at this time the moerman excelerator 16 inch if I had to choose one (cut down from 18). Until something comes out that's better
@@TradMan thx just acquired a small round, I used to clean years ago and was thinking a 12 or 14” thx
Personally I use 3 squeegees for in hand use. 16inch (cut down from 18) 12 inch and 6. For pole work a 14 and 10
@TradMan when fanning windows they look perfect, however in direct sunlight I can see faint white marks, what is the cause of this thanks
Without watching you it's not easy to say exactly. Could be too much soap, or your applicator was too dry. Make sure your applicator is properly saturated and add a thin line of soap or just a couple of drops, then rub that in and blade it off.