5 ways to remove one way screws plus hack
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2018
- In this video i will show you how to remove the one way security screws. Anyone that has dealt with these screws knows how much of a pain they are to get out and one way dosnt work for all screws and positions. In this video i even show you how to create and build a tool hack to remove these one way security screws. Many of these screws are found around doors and windows as people used to think it was a great idea till they had to remove them. LIKE, COMMENT and SUBSCRIBE for more videos types of screws tools #DIY #howto #billshowto Your donations help me to keep helping you .....
www.paypal.com/donate?hosted_... - แนวปฏิบัติและการใช้ชีวิต
Used the Dremel wheel down the center instead of hacksaw + Chisel today. Thanks! Saved me a ton of time.
Thank you! Sir. Finally found a video that helped me open that bastard! Just had to punch it at the right place, I even bought a security-screw opener set with no success. Great video. I will subscribe!
The center punch hack is ingenious. Thanks a bunch for sharing. for anyone searching - tiny 'clutch head one way screws' - are used on the older Cooler Master Seidon 120 AIO. It occurred to me that if you had a spot welder you might also be able to weld something to grip and turn the screw head.
Thank you so much. New house and one of the window openers was busted. I bought a replacement and then realised these screws had been used. Lifesaver.
The center punch idea is genius! Worked a lot easier than I thought. Thanks!
Thanks Bill. This saved me several hours of intense frustration removing 30 of the bloody things from locks on the windows of a house I've just moved into. The hacksaw method seemed easiest but the screws were recessed and I was feeling lazy so I modified your method by using a Dremel rotary grinding disc to make a screwdriver slot in the screw. would not have thought of this without your inspiration. Thanks again.
You’re very welcome 👍👍👍
Going to the hardware store tomorrow morning for a rotary tool. I hate these devil screws
Had never even heard of this center punch thing.... But it saved my day after I learned about it here. Thanks.
Extra credit: use a Dremel with a cutting wheel attachment to cut a slot (like when using the hacksaw) for a flat-head screwdriver. It also works for stripped screw heads!
Thanks for the video!
Thanks mate. Years ago there was an outbreak of car number plate theft in Sydney, so I bought some of these to make it harder for the thief. Now I'm selling the car and I want to keep the plates. Wish me luck. 😉
This video was incredibly helpful. I genuinely appreciate the fact that you gave multiple options - all of which seem legitimate - as going into a job with only one way to do it is always a recipe for frustration. Thank you.
Thanks Bill. I’ve got them on my awning winders and removing the broken ones been absolute pain because of these screws. Your tips have been very helpful. Thanks!
The fact that you showed five different ways to get these out shows that one-way screws are an excellent invention. No, they do not completely stop thieves (they watch TH-cam too) but they slow them down significantly. That said, this is the BEST video on the issue, kudos!
I ended up in same situation, luckily i have small hand held drinder through which i was able to make a groove which was enough for screw driver to unscrew. Your video helped me to get the idea of what one way screws are.
👍👍👍
You saved our front door! Thank you! Couldn’t get the deadbolt out to rekey it and this worked so well! Thanks for your knowledge and time!
Such useful things to know. Thank you!
You’re welcome 👍
Thanks mate, much appreciated
The chisel did the trick - thank for making the video.
Thanks, these tips did the trick with some hard-to-access one-way screws.
Thank you for posting! And for giving various methods. Had an old storm door I needed to replace that was screwed on with these one way screws - took some time but ultimately was a success!
Just today, JUST TODAY, I unwittingly bought a four pack of these screws (#8-32x1") at The Home Depot. Thank goodness for this video.
Thank you. The center punch worked like a charm.
That is a brilliant idea the fork!!!!
Legend, gives me some great options to get these bloody things out.
You saved me a ton of time. I had to remove 6 of these unmentionable fasteners. WD-40 and using a chisel and hammer to tap counter-clockwise did it for me.
I used a angle grinder with one of those thin metal cutters to make a slot... Thanks bill again... You're a legend!
You’re welcome 👍
Awrsome, thanks mate!
I never heard of these and bought new license plate bolts, which were these, and bought multiple tools claiming to take these bolts out and none of them worked. Will use these methods. Thank you
👍
So grateful Bill. We bought a house and were left without keys to French door patio bolts. With one way screws. I took it really slowly and used your fork trick. Brilliant, Cheers mate.
Thank you so much for your illustration. It did help a ton. Great tips...
You dear sir are a god send. Thanks to your video, we were able to get the screw out and fix a problem with our deadlock. Hats off mate.
👍
The center punch and chisel helped me out thanks! I had recessed security screws on my fuel cap.
Thank you I was feeling scared as I put in a😮 screw, not realizing what it was, into an expensive deadbolt which caught on 1 side only. Now I'm off to try the fork and chisel technique. Fingers crossed
thank you Bill, your center punch trick was all I needed.
You are the man, chisel worked like a charm.
This is great! The chisel worked for me.
Dude !!! You saved my day and are my hero. Thank you for this video. Seriously helped me out with getting old window guards out.
Great ideas for removing the one-way screws. I would suggest you use a metal chisel for removal instead of ruining a wood chisel. But, to each his own. Keep up the good work!!!
This dude is brilliant, hence, his smile of confidence!
👍
Damn dude, you're clever!!! Excellent info and very good presentation! Thanks!!!
thanks Bill...........great solutions!!
Just used the “centre punch” method. Worked well. $20 centre punch from Bunnings. 👍👍
👍👍👍
Bill mate, you're a genius!
I always learn so much from your channel, so much so that I leave a thumbs up even before watching! 😉
Thanks for sharing your awesome knowledge with us.
Take care,
Steve. 👍👍
You just saved me bro🙌🏾👊🏾✊🏾 just brought door lock from Bunnings and installed not knowing these dumb screws existed (of course like most men didn’t read instructions 🙄😂) got screws out. 🙌🏾👍🏾
Thank you so freakin much! I needed to replace a 30+ yr old deadbolt screwed on with these damn things and had no idea how to get them out. Then I found your vid. I tried the center punch and IT WORKED! Had the deadbolt off in 30 min (with a couple bloody knuckles from my hand slipping). Would never had thought of that in a million years. Thank you ❤️
👍👍👍
many great tips. Exactly what I needed. Thank you.
Unfortunately they still do sell those screws! I knew it said one way but I thought, eh I’m sure I can get that out - till I couldn’t - I’m not stubborn at all, lol. So thank you for tips, I will proceed to try them all!
lifesaver mate!!!
damn, the chisel did not work for my screw..
Got it! I appreciate the rapid-fire patter.
BRILLIANT!
Great vid mate 👍
👍
That was great brother! Sure will use them. Thanks
I think the music drilled a hole through my eardrums but I also think the hacksaw will work. Thank you, I think.
Very helpfull. Thanks!
I haven't read all the comments so some of this may be duplicated. Your video is pretty comprehensive so i'll only mention things you didn't. a) there are tools specifically designed to remove these. b) when you get to the point of drilling, left hand drill bits can sometimes take it out even before you use the easy out and especially if you've used penetrating oil. c) If you have enough head exposure, clamping the head with a chuck on a drill in reverse does a great job.
I lovelovelove the fork hack! My screw is up against a wooden door frame, so no room for the hacksaw or even a vice grip. I'll try the chisel and next, the fork!
Frigging awesome. Thank you.
Thank you for your video. I just used a grinder to add slots into the very large lag heads and the came right out with a screw driver.
Wow, this is brilliant!
The center punch trick was very cool. Worked for me - recessed screws in plastic
Worked, thanks! The screws that were on my computer were previously 'security screws' which are intentionally made one-way so that you couldn't take it apart for some reason. Really weird, already ordered the replacement normal screws.
The fork is hilarious!
Thanks mate, came across your vid after a key was snapped in the lock at my old mans place and I had to dismantle the lock. The chisel method did the job.
Thank you so much Bill. Saved my ass today on a job!!
You’re very welcome 👍👍👍
Thanks for the advice. I ended up grabbing a grinder with a cutting disc to make the slits for the screwdriver... worked like a charm.
Perfect 👍
@@billshowto Yes, a Dremel.
This was fantastic.
Beyond awesome
Great work! Thank you
very smart WOW!!!!!! FORK!!!! BRILLIANT.
Outstanding.
Thank you! My windows have had these to stop them from opening since I moved in and it’s been driving me crazy that they only open a couple of inches. I can finally get some air in here.
Thank you!! The center punch and WD-40 was a bit of work but I got there in the end!
Great suggestions. Hopefully will work for me
This was very helpful. Thank you for sharing.
👍
fork! genius thank you.
Cheers cobber. 👍🏼
Cheers Bill...love ur work.
Was like a deer with no eyes. Thanks heaps & thanks for saving me $$$$ - cheers 🍺
Loved it! Thanks.
👍👍👍
big help thanks
Legend! Thankyou
You’re welcome 👍
Fantastic video, really helpful. Thank you
👍
Some good ideas. Someone decided to use these to lock up the breakers in every subpanel we have in a multi family building. A 3-minute job turned into 30 minutes.
Some great suggestions!
Hey brother thanks a bunch! This video spared me a huge headache and salvaged my summer! 💪🏽💪🏽💪🏽💪🏽
👍
Awesome tips. Thank you!
👍
Thank you!!
Nice one bro! put my number plate on after it was stolen/fell off, chisel and pliers worked a treat!
Right on man!
Nice work Mate!
Thank you 😀
Cheers cobber.
Best screw invented
Thanks for the tips. I put these on my new car’s license plate in front and the bracket it was mounted to came off in a hit and run when my wife was in a store. Now I have to take plate off to reinstall the mounting bracket to the bumper!! Again thanks will update with what I did to back the screws off.
Watch this video for an alternate using easy outs, grab-it, screw remover tools. Works great 👍
th-cam.com/video/N1UgfNjzS8A/w-d-xo.html
They are great for keeping people from taking your stuff apart
Thanks for the inspiration little tap on the curved edge with a flat head then brute force the flat head like the chisel method was so surprised when it started turning
Thanks
Thanks sir
Thank you! This is a lifesaver. I hate these screws!
👍
All my windows have these screws😤. Great ways to remove. I used reverse screw method. Thanks, The Aussie Tool Girl.
👍
Hey Bill great video!!! & Thanks so much for sharing. We have the same issue but tried 4 different metal drill bits couldn't drill the holes in the stripped screw heads to use the screw extractor & it doesn't have enough to grip on to use the plier