Airbus Airspeed Indications

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 พ.ย. 2024

ความคิดเห็น • 4

  • @Bertie999
    @Bertie999 4 หลายเดือนก่อน

    Hi, do you know if the speed trend vector is purely inertial ie coming from the adiru or does it have a baro input as well?. Thinking about whether it would be affected by unreliable airspeed.

  • @bazokazoro4563
    @bazokazoro4563 2 ปีที่แล้ว

    What’s the difference between AOA & alpha floor?
    Is the protection available from liftoff till landing even if A/T inop?

    • @MindSpaceXAviation
      @MindSpaceXAviation  2 ปีที่แล้ว +7

      Angle-of-Attack is an attitude by the aircraft's airfoil compared to the incoming airflow. When this angle is possible the aircraft is generating lift. But if exceeding a specific value (critical AoA) the laminar/smooth airflow over the airfoil, generating the low pressure/lift, will start to get spoiled. This will lead to to loss of lift and make an aircraft drop. We call this Stalling.
      AlphaFloor is a protection for low speed. To prevent stalling at low speed/high AoA the AlphaFloor uses the Auto Thrust to put and hold TO/GA power on the engines. Alpha Floor is available in Normal Law with or without the Auto Thrust being ON. The AlphaFloor protection is available from lift-off to 100RA during approach. AlphaFloor is not available during TCAS events, Engine-out conditions or when slats/flaps are extended.

    • @dinabino2367
      @dinabino2367 ปีที่แล้ว +2

      what a good and clear explaination 😊