IT ACTUALLY WORKED! BMW M4 GT3 Front Clip!
ฝัง
- เผยแพร่เมื่อ 21 พ.ค. 2023
- Download Dave today at dave.com/tjhunt In todays episode we finalize the front end of the GT3 to start fabricating the front mounting system!
This will be a SEMA feature Car in partnership with Meguiars. - ยานยนต์และพาหนะ
seeing kyle come out of his cave and get comfy and drop these jokes is awesome lmao, love these videos
factssss
That “Nut Retainer” joke was HILARIOUS
I was not expecting that. I spit my water out 😅 Kyle’s the GOAT for that
69th like :^)
"Like your mom"
Shut down.. 😂😂😂not even 2 mins in and I'm dieinggg bro... nut retainer yunno !!
I literally LOL’d 😂
Hey TJ! I’m Luigi from Italy 🇮🇹
In all modern GT cars an extra set of lights is provided that is needed for cars that have to run in endurance races where at least one part is raced at night, for example 12h or 24h. In “sprint” races they are not needed because of course you run during the day, and the builders give the opportunity to remove them to save weight! I hope I helped you 🥰
I came to comment the exact same thing! I've just got back from the nurburgring 24hr race and all the cars had extra lights for night time and all of the gt3 cars flash them rapidly when approaching a slower car!
Was about to comment this but a little late, they are indeed endurance lights, we use them on our GT3 Merc when racing enduro races!
@@joelemus1274 What team are you from?
The “secondary” lights on the bumper would be used for endurance/races that will go into the night like the Daytona 24, Sebring 12 hour, etc.
thanks for the info! :D
What are the weight savings?
@@rydog920 weirdo
@@rydog920 Y U mad
@@rydog920 “no subscribers”
The magnet in the bumper is actually a part of the active aero. Instead of having electronics that weigh a bunch, they use specialized magnets that are tuned to open the flaps when the car is going a certain speed to increase airflow into the engine bay and intake inlets
Can anyone confirm this? That sounds incredible
That’s Correct
Checks out
Then why is it made of fiberglass instead of carbon? Also it is on the back side of the wheel well so it would be "sucking" not opening a port for more air to move through the engine bay.
@@MX304my guess would be that the magnet could be set up either way, to either assist in the “push” open with the addition of enough added air pressure. Or a “pull” closed to hold closed until enough air pressure is added to push it open with some type of return closed mechanism/spring.
The “…build in 10 minutes” video is going to be insane! Anthony kills those B-rolls
Never doubted this crew would find a way to make this work. That fab work Kyle did is CLEAN. Those front fender support brackets look excellent because not only did he give them a nice design beyond function, he cleaned it all up and seemingly gave it a semi-polished finish. Above and beyond.
Kyle doesn’t talk and then just drops a heater outta no where. What an addition. Lol
Kyle is such an intelligent person and really adds a lot to the channel. Happy to see the boys having a great time as always
I appreciate the kind words ❤
@Kyle Lumm ⬆️ is doing the hardest part of this entire build..
If you can, share the amount of hours spent in labor of every vlog so we have an idea about the true effort. You guys show it as a "easy" project but that requires effort. Let's go!
TELEGRAM ME ..👆
The editing in the last year has been top notch! Reminds me of big production videos!
TELEGRAM ME ..👆
So idk if it helps... But we converted a Audi to a gt3 at our shop and to clear alot of the points the hood was hitting.. we actually got rid of the Motos mounts and gapped the cross member and lowered the entire engine by 3 inches.. it gave us a ton of room and took half the time of building a custom hood.
Obviously we made new motor mounts for this tow ork. But our fabricator knew his stuff and made it work. Just a thought
And in doing that it also got more of the weight closer to the ground.. which really helps on Audis because the engines sit so far in front of the front axle
TELEGRAM ME.. 👆
Kyle being super shy at the beginning and after spending time with the boys starting to say stuff like that is priceless :D
The fabricator is so soft spoken and peaceful. It’s calming to hear him speak
Kyle is kinda a straight savage 😂. He is def that guy who stays quite then drops the best one liners
Awesome video as always TJ Hunt. This build series is so awesome can't wait to see the finished product.
Keep this build goin!!! Woooooooooo. Congrats on the GT3RS to man! That spec is straight fire
Kyle killed all the fab work. You’re team is unstoppable TJ.
Only about to get started 😊
Wow, almost there to complete the build, I cant wait to see on the ground in complete gt3 form, looking forward to that TJ!
I just love all the antics you do to each other like yelling when he was cutting stuff and his look he gave you 🤣 i love your page TJ
the fab work is outstanding
TELEGRAM ME ...👆
Havent watched a video in years it was refreshing to watch you again. I remember watching back in like 2016/2017 and getting the Hunt or be Hunted tshirt. Youve come so far! Congratulations
I'd love to know how much a *conversion* like this works I can't wait to see this complete it's going to look *unreal* 👏
I love how wide it is! Great job TJ, Never stop amazing us with your Builds 🔥
love how the kit is going together and love that your dream of having a bmw race car so excited to see how it ends.
Seeing that mega expensive, ,mega designed BMW Carbon being cut up has been making me wince throughout this build (knowing how much I've paid for tiny carbon bits for my E and F series M3's, but seeing the workmanship, re-design, custom re-manufacture and care that's gone into making this project work is an absolute delight. Teamwork makes the Dreamwork. Never a truer statement. Thanks for the video TJ & the Team.
I love how much fun you guys are having
Kyle had me with a lil giggle on the edging joke, but the nut retainer one right after? Bros funny 😭
This build is insane Teej, keep it coming!
TJ Hunt Awesome Video I'm glad your M4 GT3s Front End finally done and I can't wait to see the finishing touches and I think it's crazy that you have cut so much of the hood
You and Street Hunter should definitely use the kit you have in hand, along with all of the knowledge you're gaining from making this fit the street car, and make a body kit that replicates the styling of the GT3 kit but is a straight bolt on kit for the masses. Easy money with the Bimmer boiz $$$$
Can’t wait to see the final product! It’s gonna be wild!!
Well done boys!
Well done!
The guys are getting so much done because they are always on edge 😉
Kyle straight duuuuu duuuud his pants towards the end😂😂😂 he said
“how you like em apples” 😂
Might just be me but I got sitcom vibes from this entire video lmao.
Keep it up bois!
Calvin been there since day one why don’t u get him a new car ?
Bro, he bought benedict a new car. You really think he wouldnt buy Calvin one if he wanted/talked about it? Ever since Calvin wrecked his supra he hasnt talked about doing ANYTHING with new cars, which is lowkey sad. I agree though, would be nice to see him with a new project
You should paint all the fab work the same color as the car, it will look nearly factory, that fabrication work is top notch, keep those standards up for that sick car.
Welds look bad.
It’s looking good so far!!! Can’t wait to see it finished!!!
I'm Kyle has made a comeback too the vids, feels like it has been years. His work is so good too
So In love with this build series
Great work , great build , greatness in a video , great guys ,
We have the exact same way of 3D Mapping/Modelling at my work with the reflective dots etc, but we use it for pipeline corrosion etc. Crazy the ways everything is adapated and used for loads of different things.
I just went to watch a gt3 race at COTA in Austin, and seeing one of these cars in person was nuts. The GT3 m4 is insane, the side dump exhaust looks insane, the real hood and all the vents are unreal. The cameras and all these videos although great do not give it justice
Incredible! I lol'd at the yelling bit while Calvin was sanding
Absolutely wild. Looking fantastic 😍
Nice work guys
Been waitinggggg, so pumped on this build!
Seeing the skills and growth of the boys👌🏽
Damn didn't expect Teej to get straight up assaulted within the first 2 minutes
he fab work is awesome , tj just imagine a selection of TJ hunt bespoke intercoolers and decats and intakes .
Love it this felt totally like a clips video!!!
Tj save yourself a major headache and add a bit of caster to the front wheels. Love the build btw.
coming along nicely!
Hey TJ! As far as the liner magnets if I’m not wrong, they should be the place where the TPMS modules sit for each tire. I work for a GT3 team that races Mercedes and although are cars are not the same, on the backside of the fender liners we have a spot specifically for our TPMS boxes very similar to that and they just get plugged into a harness that runs by it. These race cars are so cool and technical, blew my mind first working on them!!
1:36 The nut retainer joke was nuts .... ( no pun intented ...)
Awe take it easy on Dylan the guys a softy deep down lol ! Also for sureeeee happy with the idea to keep that hood and modify.
This looks incredible ❤
Wow. Fantastic work.
The irony in TJ saying "Kyle's illiterate"
Dude man getting caught up so much work but so worth it.
Great work guys
Kyle’s mom😂👌🏽
#SouthPark
Feels good watching this video with the same shirt as the hoodie tj is wearing.❤
i would relocate the fuel filler cap to in the trunk. that keeps the fenders nice and clean
TELEGRAM ME . 👆
I love Kyle. I hope he stays around permanently
TELEGRAM ME ...👆
Oh hell yes. New video from you and I got dart league tonight in a few hours. Let's go. Shaping up to be a good Thursday.
Those fender mounts look more factory than just doing round tube with some tabs. I like it 🤙🏼🤙🏼
TJ The goal of this build is to duplicate them on a street car and produce them? Something will be wrong with the wheel fitment if you don't get offset tables forward so the wheel are in the right spot.
I don’t think that’s his goal! I think this is purely for himself and the crew to see if they can actually accomplish it. I’m about 99% sure they don’t plan on doing this for anyone else
@@TexasDmax_2k Street Hunter Street kit maybe
Nahhhh buddy street hunter would be doing there complete own design if that was the case ya know. I think this is more of a one off for content and some what of a blue print if anyone wants to try and accomplish.
My boi Tj been bumping some Morgan Wallace... That's a good song right there
Dear H&C racing team, thank you for providing far better entertainment than Hollywood ever could.
Waited so damn long for this video bruh
The mom jokes are out of pocket, and I’m here for it 😂😂😂
TELEGRAM ME ...👆
Shoutout to Anthony for his mint filming 🔥
Dylan and Kyle are fucking amazing additions to this channel lol
😊😊😊
I love the idea of glass cut outs on the hood, maybe even BRG accents in the hood with carbon so you can see both through the hood. It looks insane!!!!Maybe make metal panels that cover all the extra hoses and electrical and paint it BRG(or make it carbon if the hood doesn’t stay carbon) in the engine bay.
Wow my god , very good job and big project !
Looks good great job and keep up the hard work 😎😎😎
Nice. I never doubted you guys.
That looks sick!
Yes yes yes! One of my favourite projects ❤️
Im from egypt broo
Keep going you are amaizing❤️
My favorite notification to get on my phone makes my day/week
Y’all the best 🔥🔥🔥i am from Grenada 🇬🇩 wish I could meet you frfr
Unrivaled build TJ , you dee mann , Im jealous
damn this will truly be a 1 of 1
Kyle's got jokes now!!!
It's sweet u put the guard on the grinder for tj
I love this build!
Dill in the beginning of this had me dying. 😂😂. Fool was pumped af to work on the M4
Just the clips Chanel’s editing carried over to the main and it’s great haha
That nut retainer joke got me
TELEGRAM ME ...👆
Tj kinda looks like Ryan Tuerck in those safety glasses 🥽 😂
23:58 god damn I felt this cinematic section here. That's top fucking story-telling.
Love seeing this come together , honestly cannot wait to see it fully together , brg tint over the carbon and wheels on and slammed on its ass 😂
That shit dope super fire 🔥🔥🔥 wish I can do shit like this
You HAVE to geT the fog Lights they are Class looking 👌🤙💯
Tj, “squeeze’s” had me LAFFIN why you put the apostrophe
Ayeeeee I'm Here! I hope you had a great day TJ!💪
The jokes in this episode were top tear. Love the M4 GT3 series.
That’s going to be a monster I love it