Evinrude/Johnson Controller Handle Removal ….PLEASE SUBSCRIBE APPRECIATE ALL YALL:)
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- IM SO THANKFUL FOR THE 27K VIEWS BUT ANY CHANCE FOLKS WOULD HELP ME OUT BY SUBSCRIBING TO MY CHANNEL? JUST TO THINK I POSSIBLY COULD OF ENJOYED ALL YALL SUBSCRIBING BUT DIDN’T KNOW TO ASK :) THANKS APPRECIATE ALL YALLS COMMENTS TOO:)
Video showing how how simple the controller handle is removed once you finally find out how:) Hopefully this will help as I couldn't find any complete handle removals out on Web....sorry for the light change in video:)
![พบรัก - INK WARUNTORN x FELLOW FELLOW [LIVE SESSION]](http://i.ytimg.com/vi/1VonHhP6_Y8/mqdefault.jpg)
My husband spend 2 days trying to hammer the thing out then I found your video thanks 🙏🏼👏🏻👏🏻👏🏻
Thx Jessica:) Lord willing it’ll help fix his boat issue:) Lord Bless:)
Thank you for being direct and to the point! Your video is way more informative than the other people blowing wind and not talking parts or tools! Thanks again 👍
Thx Kristy:) Appreciate that very much:)
You’re such a lifesaver! I’m remodeling a 2000 Lowe 160 with a 40 horse Johnson and I just could not figure out for the life of me how to remove the throttle. This is making things much easier for myself now. Thanks again brother!!
Thx Logan :) Amazing what’s not on the net already:) Lord Bless:)
Thanks Darrel! You saved a fishing trip for me. The plastic stop broke on my shifter and jammed so that I couldn't get into gear on the lake here in Alberta. I got the shifter apart and removed the plastic piece. Back in business!
Lowell, Thanks & awesomely that You found my way to get it back In Working order :) Totally Awesome:)
Found your video today and it is a lifesaver! Thanks for posting.
Perfect - unlocking the secret! The allen key is 1/8" - good tight fit (3mm is a bit wobbly and may slip) needed a fair bit of persuasion + GT85 to get it to turn, but a great result after a hot day's fiddling with the whole OMC throttle/switch mechanism. Starts (like all these small jobs) with a bit of YouTubing to sort out a stiff throttle cable and ends up - like Malcolm in the Middle - with nearly a complete engine change!
Great info Mike , glad u found it & helped you:)
Short and to the point, awesome!!! I am needing to replace the shift cable on my 1996 sunbird fish & ski and it has this merchanism for the 130hp Johnson on the rear. Thank you sir.
Thx Brad I’m glad it made it Thru the internet to ya:) lol , Lord Bless
I’ve been looking for this exact video! Thank you for posting it. It saved A LOT of time and frustration.
It’s amazing What ain’t out on the web until we take time to add our “Moment” lol :)
I have a 1990 Evinrude and this video was perfect at describing how to remove the controls. THANK YOU! Hope to have my helm pads upholstered for the spring! 😎
Great to hear video is still helping folks out:)
Great Video...I have been banging my head aginst a wall trying to figure out how to get the handle off for a day!
Thx Nicholas :) I understand the head banging:) Lord Bless:)
Man you are a life saver. Wrestled with this about an hour yesterday and couldn't figure it out
Thx, amazing what’s not on the web yet til folks figure a workaround ain’t it:)
Thank you so much for sharing, I knew there had to be something with that opening in the bottom but I couldn't figure it out. You saved me a ton of frustration and I thank you very much! Have a wonderful day, I know I will now :)
That’s Great Bob so glad to hear it helped u out:) took me months to figure it all out like a puzzle to put the pieces together:) Lord Bless:)
Thank you! Shouldn't be so hard but it is and there's nothing out there is correct!
I was wrestling it the other day to get it off.....great video thanks
Thanks so much. I've been messing with my dad's boat for about an hour trying to figure out how to get the lever off. Thanks for taking the time to post this video!!!
Gary Titus Totally understand Gary I struggled bigtime to find info and only figured it out w bits and pieces from other videos and did the poorly made vieeo real quickly & i am schocked at 2336 views, wow :) Hopefully somebody will do a lot better video than mine:) Anyways Thx Gary for the comment:) Have a Great Day & Lord Bless:)
Thank you so much... I have been struggling with this for an hour!
Thx Randy so Thankful it’s helped a pile of folks:) Lord Bless:)
I would have NEVER figured that out. THANK YOU !!!
ChrisNYPilot Thx it took a lot of Prayer for sure:) I was pretty flustered for weeks as I searched all over the net & ended up putting each piece I saw together to complete it:) Sad video I know cause just on the last moment I thot Maybe better get this out there & asked My Daughter to video it & never thot it would ever be seen :) Lol Thx & Lord Bless:)
@@darellmurray2860 I don't know if you can help me with this, but for some reason my throttle does not go a full 90 forward or backward. Maybe it will go 70 degrees max. It is a very smooth operation for those 70 degrees, so I do not think the cables are bad. But clearly it is not moving forward far enough for me to get to that set screw. Any thoughts? Thanks. :-)
Thank you for posting your video of how to remove the control handle. I was really at a loss until I found your video.
I have a 2006 75 etec with this same type of side mount control and it worked the same as the one in your video.
To add my 2 cents once you get the handle off there is a cover to the rear that pops off by using a screw driver. There is a slot in the middle half way down where the screw driver blade fits to pop this cover off. It is held in place by three snap type fittings. Once you get the cover removed there are screws under it, remove these. There are three machine screws also around the central hub that hold the mechanism together. Once you remove the screws under the cove and the three machine screws the whole thing comes apart. I believe you can leave the cover in place and the screws under it if you don’t need to remove the outer base, in my case I needed to remove all of it to remove the old carpeting that the Lowe factory place over the mounting plate. I did not replace the carpet but cleaned and painted the mounting plate instead, looks better in my opinion. Thanks again for your video because without your help I was pooched. :)
TheSagerider Thx Appreciate Your kind words & Appreciate Your insite on the rest of the removal for sure:) Lord Bless:)
Thank you! Excellent video
Thx & Lord willing it helped yall out:)
Thank you this literally helped 3 of us are in the boat right now haha
Proud y’all got it fixed :) Somebody must of been praying in that boat to if found this video just in time:) lol
Thank you Mr. Murray! This helped me.
Praise the Lord it helped You out Biggley John:)
this was a big help, thanks
Thx Harold Glad it gave u what u needed:) Lord Bless:)
Wow! Just what I needed to find, thanks so much!!
No Thank You :)
Your frickin awesome.....ive been killing myself trying to remove mine....thansk for the info
So glad You found it & made ur day:) Thx
You are great man!! I spend a day trying to find how to remove it. Do you know which is the correct switch for the handle?? I need to replace it. I have a evinrude 1996 115hp
Lifesaver!!! Thank you so much.
I can’t find the Allen to save my life, even got the handle in the position it’s in this video
Try 1/8in Allen wrench:)
I don't take very many of these Johnson control boxes and I did not know how to remove the throttle up button on these I mostly do mercs thank you very much you saved my ass!
Roger, Proud to of been of service:) lol, Thx & Lord Bless:)
@@darellmurray2860 Hey dude I had to do a replacement for a repair kit for the control handle with a new tilt and trim switch for a customer . I made a complete video on how to do it. I am not very good yet but do have the video . I don't know how to edit so and I don't have a short tri pod yet for my camera . I realized there are no videos on You tube on doing this job so eventually when I can get my confidence and start editing and getting decent I can start a account and start posting tube videos. I have a customers boat I have a customers boat its a 97 Cobalt . It came with a fuel injected 502 in the late 90s he took it to Tahoe and had a Whipple Super Charger installed and it was close to $7,000 then, Anyway its sat for a long time and wont run I want to do a video on it I have been restoring it off and one for about two years. I wish I knew how to edit I want this to look good when I do the project.Your video really helped me a lot thanks again!
@@madmanmechanic8847 Wow that’s quite a handful of boat & motor to restore... thing is Roger I still don’t understand the editing either, But just do it like I did & get the information out there to help folks who are searching for help:) u may need to do short ones & post as u go instead of trying to make a perfect one is my thots, u definitely have a talent for working on that rig & it’ll be way cool to see it come together:) I just use my iphone 10 & try make them short so they post easy:) Go for it :) it’s a learning process for some of us & enjoy it:) Thx
@@darellmurray2860 Thank you so much for the words of encouragement ! That helps a lot. I just found a really nice used 11.5 tripod on ebay. Its very well made and I got a good deal on it, Infact they just shipped it. I have been scared to death about editing and have no clue why? I will take on a re seal and rebuild on a Mercruiser stern drive but scared of editing. I know weird huh? I though of the title for the Cobalt let me know what you think. BLOWN AND INJECTED 502 COMES BACK LETS BRING HER BACK FROM THE DEAD do you think that would bring some hits off of You Tube? I bought a used JVC cam corder . Its a one of the model of GZ-MG2554U it has very low hours on it barely used. It had the zoom and all kinds of functions on it I have no clue how to use , You can even push a mode to do black and white vintage shooting on it. Just amazes me how much stuff then can get into such a small corder. I bought a Go Pro a Hero 1 years ago I am not comfortable with it . I really needed the flip out screen and the zoom that is why I bought the JVC you can get these for rock bottom prices , I barely know how to use it. But hopefully I can learn more and learn how to edit .I you ever need any advice or help reach out to me. Love to give back and help people. I can get my email address to you. Thanks again for the advice and support it really helped.
Thanks
How can I get to the Allen screw if the lever doesn't rotate back to 3 o'clock? I'm thinking the Neutral rod lock broke or the spring fell out. Any advice?
Sure hope you’ve gotten it apart & I amagine u got it apart by now sorry I just saw ur question:)
Did you ever figure it out? I can't rotate mine either. I was thinking about like you said on the motor.
Great video, any idea what size that 1/8 inch Allen set screw is, mine is stripped out severely having a hard time finding one on the Internet
Sorry how many threads ? Wasn’t sure if I could find an aftermarket one to put on there or if it had to be OMC
@@michaelclem1476sorry just seen this:) I can’t tell u any of that as boat is no longer around But surely someone on here can give u an answer:) Thx & Lord willing u figure it out:)
Just another thank you.
Glad it helped you out hopefully took the frustration out of it for ya:) lol
@@darellmurray2860 Yes it did. Saved me lots of grief and perhaps breaking something. Again, thanks.
Thank you!!!!!
Perfect exactly what I needed!
James Doster Thx I appreciate that & do u happen to notice the Allen head size so can b posted to help other guys & girls out? Thx again & Lord Bless:)
@@darellmurray2860 I think it was 1/8 inch
Thank you so much!
Can you tell me where I can find a replacement handle? I broke the red button that you push to release it forward & backward 😞
Sorry Timothy didn’t see your question til now :( Hopefully you’ve found the parts u needed:) I don’t know if any parts:)
Timothy, where did you find one? I just did the same thing.
DId you figure out how to get the control unit out so that you could replace the cables?
ChrisNYPilot I replaced the Johnson Controls & Motor w a Yamaha which came w Controls which Thankfully mounted on the outside which is a dream to put on:) Now I did have to drill some holes for the Yamaha cables to fit thru to the motor:) Thx
So.....ive removed the allen head screw completely but the lever still wont come off....! HELP??
0:37 tells ya remove the screw only 2 turns exactly! No further !! if u go all way out it will bind up!! See if this helps u out :) Hopefully so:)
Did you make a video on removing the entire assembly? I need to replace cables.
Only what u see there is all I did & that was only from struggling for months trying to find info n finally figured it out :) Hopefully you’ve found help for it:)
@@darellmurray2860 Followed your video and removed the old one. I lubricated the cables and have a replacement on order for the entire control assembly. Your removal of the leaver was most spot on. Thanks
Allen wrench size is 1/8, Verified. 👍🇺🇸
Appreciate the help:) Have a Great Day:)
The white push button on mine won’t push in now. I did a complete makeover on my 1998 Lowe 180 and this is the only thing keeping it from the water right now 🤦🏽♂️ lol. Any suggestions?
chris alejandro sorry just seen these comments I would think spray lube inside behind the rubber cover would help & I’m sure you’ve moved the handle back & forth while pushing the button in to see if it releases:) I did this & sold handle so don’t know size of the Allen head sorry about that:) Thx & hope you’ve already gotten it on the water:) Lord Bless:)
Yesir! It just had been sitting for awhile had to force it but she’s up and running now! Thank you!
I need a new handle, my trim buttons quit working... Any idea where to get a new one?
www.marineengine.com/parts/johnson-evinrude-accessories/index.php?year=1992&model=Remote+Controls+1992§ion=Remote+Control+-+Concealed+Side+Mount&yid=34080&mid=34086&sid=38508
What size is Allen head?
did you find out what size?
Jack Gibson My humblest apologies guys as I’ve sold everything & didn’t think to notice Allen head size !! I hope somebody can post the size to help everyone out:) Thx & Lord Bless:)
James Doster replies he thinks it’s 1/8in Allen wrench:)
What size allen did you use?
chekhov chek My Humblest Apologies I sold everything & didn’t notice Allen head size I’m asking guys if someone can post it to help y’all out:) Thx & Lord Bless:)
James Doster replies he thinks it was 1/8in Allen wrench:)
It’s 7/16”