Thank you for sharing great information. I have the same fault and the vehicle is running at idle end misfire. The 2nd cylinder of the vehicle provides low compression What would you suggest as a solution? Thankyou!
Ramiz great video it help me to resolve finaly the misfire issues after 1 year. Already know the solenoid was not great but haven´t made a link between that and the misfires. Now I remove the valve and block the pipes; so is now "stuck closed" , works better on low regine , not so good boosting the engine up. Will order a new solenoid and will be as new! thanks indeed.
I’m having the same issue all the same codes, runs very rough. I’m yet to look it to it properly. Just wondering how taking all the flaps out would help?
I have the same error P2004, but there are no gaps. Just writes a mistake, there is no check. Where to look, where to start? The car is going great as before. I can't make an adaptation, but the drive test is done and you can hear the flaps clicking.
Hello, How was your compression? I got also blg with misfire p0301 and p301 and lower compression at cyl 1... The car come to me with p3008 cam sensor but it was the stretched timing chain.... Do you think the flaps can change compression?
damn good video some owners have remarked the cavd engines suffer from mysterious misfires you'll be changing and cleaning everything yet there will be some misfires happening. I got a question what were the symptoms also did the check engine light come on ?
I have the same intake problem on my 1.4 tsi 170hp...does anyone know what the manufacturer's reference number is for the intake manifold that contains the flaps?
Hi do all four flaps move independently or all move the same off one rail ,I have p2006 bank 1 stuck closed cold start misfires .if the vacuum pump that operates the flaps moves wouldn't that mean the runner flaps are opening and closing?
@@ramiztheautolocksmith9022 I have bent the flaps back into postion and refitted without any more faults. You do have to be very careful refitting the manifold as its flaps only bent over because they were refitted improperly previously.
great info video I have same issue just wondering how it’s going with flaps taken out thinking of doing the same the new piece is €600 thanks
Thank you for sharing great information. I have the same fault and the vehicle is running at idle end misfire. The 2nd cylinder of the vehicle provides low compression What would you suggest as a solution? Thankyou!
Can I remove the other piece in the cylinder head intake port. It seems that there is also a flap there. Would it cause any issues if removed
Is there any chance to remove the flaps? Will the engine run properly after that?
Ramiz great video it help me to resolve finaly the misfire issues after 1 year. Already know the solenoid was not great but haven´t made a link between that and the misfires. Now I remove the valve and block the pipes; so is now "stuck closed" , works better on low regine , not so good boosting the engine up. Will order a new solenoid and will be as new! thanks indeed.
I'm So grateful this video helped you .
Which solenoid did u order ?
I’m having the same issue all the same codes, runs very rough. I’m yet to look it to it properly. Just wondering how taking all the flaps out would help?
I have the same error P2004, but there are no gaps. Just writes a mistake, there is no check. Where to look, where to start? The car is going great as before. I can't make an adaptation, but the drive test is done and you can hear the flaps clicking.
Hello, How was your compression? I got also blg with misfire p0301 and p301 and lower compression at cyl 1... The car come to me with p3008 cam sensor but it was the stretched timing chain.... Do you think the flaps can change compression?
Hi yes I had low compression on cylinder number 1 and 2 it's best if you check the flaps.
damn good video some owners have remarked the cavd engines suffer from mysterious misfires you'll be changing and cleaning everything yet there will be some misfires happening. I got a question what were the symptoms also did the check engine light come on ?
I have the same intake problem on my 1.4 tsi 170hp...does anyone know what the manufacturer's reference number is for the intake manifold that contains the flaps?
Great information, thanks for sharing!
Same code i have.... but when i disconnect the valve/solenoid that sits on the black pipe 2 vaccum pipes the code goes away no misfire codes at all.
Hi I have same problem but with bank 1 stuck closed … do you advise to chance the vacuum valve control? After check the flaps?
Hi
Yes you can do that but first you need to make sure that the flaps are free
@@ramiztheautolocksmith9022
Thank you 👍 is your garage in London?
@@7chrii yes north london Tottenham
Hi do all four flaps move independently or all move the same off one rail ,I have p2006 bank 1 stuck closed cold start misfires .if the vacuum pump that operates the flaps moves wouldn't that mean the runner flaps are opening and closing?
Im having the exact same problem on my golf5 1.4 tsi...what's the solution to the problem
Hi
Take the manifold off and take out the flaps.
@@ramiztheautolocksmith9022 I have bent the flaps back into postion and refitted without any more faults. You do have to be very careful refitting the manifold as its flaps only bent over because they were refitted improperly previously.