KEEP IN MIND THAT YOU NEED TO LOCK THE GEARS IN PLACE BEFORE REMOVING THE FINAL DRIVE. I WAS INSTRUCTED TO HOLD THE PEDAL DOWN WHICH LOCKS THE DRIVE TO BOTH AXLES.
Thanks Hans. Were the brakes squealing/squeaking or ineffective when applied? I ask as my 990 squeals very loudly especially in low gear from rear axle - so it's brakes or bearings! Thanks also if others comment on likely source of noise.
Hi I know this is a fairly old video ,but I'm doing this vary job on the same model at the moment and I can't get the hub to come away all bolts are removed I can create a gap of about 10 mm but it won't shift ,only thing I've done differently is I started on the right wheel
@@karlpascoewelldone4173 happy to help if i can. It’s proberbly a little bit stuck. If you have a garasje lift or something to help it come out strait. This things are heavy!
Mest trolig en fjør som har ryki. Hvis det er DB du skal bytte på å det er sperre så husk å lås med sperre i låst posisjon. Dette gjelder demontering på høyre side siden det er her sperre funksjonen sitter. Blir den ikke låst i posisjon å du demonterer så spretter sperre innslaget ut av spor i diff å du får deg noen veldig seine kvelder med å løfte ut hele girkasse partiet.
Ja var veldig rett frem i grunn. Eneste som var vanskelig her var å få løsnet bremse staget med 2 kontra muttere på og det er jo i selv enkel skruing så dette var overraskende greit 🙂
Great video. Only video I've seen so far that shows how to replace the brakes on these tractors
If it has dif lock on right hand side, tie down the pedal before removing the reduction
@@edwardvoysey6205 thank you I will eventually have to anyway so thanks for the tip
Great stuff. I only just found this channel and this is exactly what I need, as I have a 950 with a thing or two that would need some tuning.
KEEP IN MIND THAT YOU NEED TO LOCK THE GEARS IN PLACE BEFORE REMOVING THE FINAL DRIVE. I WAS INSTRUCTED TO HOLD THE PEDAL DOWN WHICH LOCKS THE DRIVE TO BOTH AXLES.
Great video, been looking for a video that shows how to change the brakes and this is the only one their is👍🏼👍🏼
Thank you 👍🙂
nice video super song,
Thank you
Nice vid. Dumb question though: Do you need to drain transmission & diff oil first?
Thanks Hans. Were the brakes squealing/squeaking or ineffective when applied? I ask as my 990 squeals very loudly especially in low gear from rear axle - so it's brakes or bearings! Thanks also if others comment on likely source of noise.
Byter reparera man bromsarna på samma sätt på en 990 selectamatic? Min vänster broms har pedalen "fastnat" höger funkar.
David brown brakes 😂.
Hi I know this is a fairly old video ,but I'm doing this vary job on the same model at the moment and I can't get the hub to come away all bolts are removed I can create a gap of about 10 mm but it won't shift ,only thing I've done differently is I started on the right wheel
Did you tie the diff lock down in position before starting?
@@hansgunnarkjemperud4159 yep did all that undone the brake arm etc but it won't budge ,thanks for replying by the way wasn't expecting you to
@@karlpascoewelldone4173 happy to help if i can.
It’s proberbly a little bit stuck. If you have a garasje lift or something to help it come out strait. This things are heavy!
@@hansgunnarkjemperud4159 thanks will give it a go much appreciated
@@karlpascoewelldone4173 did you get it off? 🙂
Ser bra ut. Tips til bremser som kun brålåser?
Mest trolig en fjør som har ryki. Hvis det er DB du skal bytte på å det er sperre så husk å lås med sperre i låst posisjon. Dette gjelder demontering på høyre side siden det er her sperre funksjonen sitter. Blir den ikke låst i posisjon å du demonterer så spretter sperre innslaget ut av spor i diff å du får deg noen veldig seine kvelder med å løfte ut hele girkasse partiet.
Takker! Er en 950 på venstre siden
Da er det null problem.
Ser jo veldig greit ut det som du gjør der Hans Gunnar, er det ganske likt på min 885 tro, begynner og bli dårlig med brems på den.
Ja var veldig rett frem i grunn. Eneste som var vanskelig her var å få løsnet bremse staget med 2 kontra muttere på og det er jo i selv enkel skruing så dette var overraskende greit 🙂
Thos is a 990?
950
Visste ikke at du drev med David brown traktorer. Onkelen min er helt vill etter disse. Han har flere stykker.
Ja driver bare hoved saklig med Brown jeg. Godt det er flere av oss