..pure awesomeness man!! I own a shiver and I have that smile like..always. My dream is to convert my bike to a factory one as well since Aprilia doesnt make for our model! That means a lot of cash here in Greece.. I have acrapo so far :D and some rizoma handle-parts! Cheers bro
Aprilia Shiver is definitely a fun bike. You can feel the torque in stop-go ride especially in urban area. 👍🏻 Change the stock battery to a lithium battery and it makes the bike lighter and more nimble. ✌🏻🏍
You had an Aprilia shiver 750 I just got one 2009 Aprilia shiver 750 don't know how or if you can lower take off speed I put 1st gear let off clutch slowly and bike just takes off to fast without giving any throttle at all is yours like this How could I fix this?
Yeah I did that when I 1st fitted the cans. They sounded awesome but I was afraid the loudness may affect my hearing in the long run. 😂 I cut the baffles into half and put them in... so that's the compromise. Medium volume... 😃
Haha awesome! Removing the baffles was pretty much the first thing I did too. I always wear earplugs on longer trips anyway so hopefully I don't end up deaf. I sold the Shiver last year and now have a Tuono which is even louder so earplugs are a necessity but damn it sounds so good!
Tuono is an awesome bike and certainly a nice choice. I like it but I just don't want to let go my Shiver in order to get a Tuono V4. The Shiver is for me to keep...!
how long have you had this bike and how do you like it. im on a 599 hornet right now and am considering upgrading to this how does the v twin motor feel vs an inline 4? thats what im most worried about
Oso 11 I ride it daily to office and it's awesome. Shiver doesn't have as much horsepower as the Japenese 4-inline but its torque is high and usable. 👍🏻 By the way I've had my bike since 2009. 😁
@AlK Vlogs The maintenance cost is for 4 bottles of oil (Shiver uses about 3.2 litres) and an oil filter. I DIY the periodic service so I save on labour charges. 🔧😁
@@TheBalija1 I didn't have any major issue in my Shiver ownership except once the air intake sensor (MAP) went kaput so it had to be replaced. 🤦♂️ I just searched and bought the part from eBay. 😄
I can recommend an ECU update! I've done it and do not recognize back the shiver !!!! My ECU was not reflashen so that a new programmer bar geheigen ram had to be put into it . For: Road Italy - LV Deact - DNA filter 80.3 72.7 NM - BHP at the rear . After ECU flash : 90.0 BHP - 80.7 NM on the rear !!! : D
Go to some one thats doing "rexxer tuning". Some ECU you can reflash, but mine not. The put a new RAM in thats was programmable. After that the make a file in the ECU thats fit on my bike whit the specifications. Then 7 runs on the dyno to get it like now..!!!!
Aprilia Shiver 750 2008y. Hello my friends. How much is the fuel consumption of Aprilia Shiver 750 2008y. I want to buy, do you recommend it consumption, quality, comotion? Thank you.
Shiver looks great. What rear fender is that? How did it mount? I want one but don't want to do any cutting or drilling. I have a grill guard to install on mine came out of England. I also like your lower belly fairing. I have seen them on ebay but the years stop at 2012 and mine is a 2013, any idea if they work? How was the install?
It's a Skidmarx rear fender and came the fitting kit (no need to do any modification). The belly pan is ABS-model design and I used an Aprilia ABS mounting bracket which I bought from AF1. It should fit a Shiver of any year model. ✌
So you need an extra bracket for that belly pan to mount? How is the install? I want one but not sure of the install process and don't want to drill or have to make things fit right. I have a 2013 non abs Shiver.
The bracket is plug and play and should fit your bike. It's quite easy to install the whole thing. scontent-kul1-1.xx.fbcdn.net/v/t1.0-9/73932_1711520349357_5434035_n.jpg?oh=efba55fd96153f2660d191d6f9c3a91f&oe=58EF4198
Where did you buy all of your upgrades from and do you still own the bike if you do have you had any troubles with it in the time you owned it thanks for this great detailed video!
Hi WW. 🙋🏻♂️ Thanks for the compliment mate. ✌🏻 Yes I still have it and am keeping the bike in my garage... although it's not ridden much these days. The bike is already over ten years old (2009 model) and has accumulated about 84k KMs. My upgrades were mostly for cosmetic only like carbon parts except for the exhaust which was for louder sound 💥 (road safety reason ⚠️). FYI, I bought the parts from various online sellers like eBay, AF1, European sources etc. My only major problem encountered was a faulty MAP sensor which caused the bike to get stranded at a roadside once. After it was replaced, they bike ran fine until today. 🏍️💨 Cheers. 😎
@@DesertGoon Didn't know about the reliability on aprilia's but that's sounds great! Thanks for the info man love the bike I might get one myself. Cheers! And ride safe
Nice bike man !👍 Question, hope you don't laugh about my ignorance...... What is that break lever protector called ? And why isn't there one mounted on the clutch side as well ?
Thanks Andree. It's called brake lever guard and is used and also mandated in MotoGP. However it's not compulsory for the clutch side. You can view this video to understand the reason for installing a brake lever guard. Ride safe...! th-cam.com/video/CM4-cB_0Y_Q/w-d-xo.html
Hi. It's an Aprilia OEM windscreen for the first model Shiver. Originally my bike didn't come with any windscreen. www.apriliaforum.com/forums/showthread.php?182499-Shiver-windscreen
+bananamacaca It has compression and rebound settings. My setting is a little bit on the stiff side (but still comfortable for me) for better stability at undulating corners but it's just my preference. Anyone can set it to his liking (whichever he wishes).
Bonjour. 🙋♂️ Mon ventre est standard pour le modèle ABS mais c'est une version carbone. La housse de capot de siège est de marque HLD que j'ai achetée sur eBay. 😎 #RideSafe
I believe you're referring to this part... www.apriliaforum.com/forums/attachment.php?attachmentid=322193&d=1480270496 You can get it from AF1 USA or corsameccanica.com/aprilia-clutch-case-protection-kit
+Evan Ong The bike is quite an all rounder. It suits many purposes, as a daily commuter, a weekend fun bike etc. Fairly nimble in handling. I've had it for about 6 years and generally it's trouble free.
Salut. 🙋🏻♂️ J'ai acheté le fatbar LSL en ligne. Essayez de trouver celui qui vous convient ici ... www.louis.eu/katalog/marken/lsl-handlebars/92/460/340 Mon capot de siège arrière HLD a été acheté sur eBay. Pour le pan de ventre, je l'ai acheté de Chine. À votre santé. 😎
I would say the power at 95hp is just fine for a beginner. If you ride in 'T' mode it won't bite you. 😃 Dorso seat position it higher a bit and its gearing is 16/46 stock compared to Shiver's 16/44. Imo Shiver is great for commuting... ✌
Ducati's equivalent bike for Dorso is most likely lighter. Here are the specs for Dorso... www.motorcyclespecs.co.za/model/aprilia/aprilia_sm_750_dorsoduro.htm
Sweeeet, i have a shiver my own, what is that thing in the middle of your handle bars ? Is that for your phone, I am looking for a phone holder that is low profile ;) Ride safe but hard! - Little
+LittleBIG Riders Yes you're are absolutely right, it's a waterproof phone holder called Tigra Sport BikeConsole mount. :) scontent-kul1-1.xx.fbcdn.net/hphotos-ash2/v/t1.0-9/1150263_10202799207122774_1592671358_n.jpg?oh=b70674bdd4bbd0cbfc9f60c41f903cb8&oe=56DFD763 fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/1528681_10202725769046868_944326619_n.jpg?oh=c0a0e3eed8c769a40bef819a123dfc12&oe=5713213D&__gda__=1460880870_1e65e54e8a7da5b0a112d3dd8479a1eb
Amazing :D It doesn't sound over the top, with DBKillers and DeCat :) I have Roadsitalia and thought about DeCat Arrow, but I was scared too much sound.
Hi Victor. In reality Akrapovic exhaust does sound nice and is not obnoxious to the listener. 👂🏻 I have removed the DB killer for a louder volume 🔥 so that drivers are aware of my presence near them (esp. at blind spots 👀). ✌🏻😎 #RoadSafety
Are you referring to this part...? scontent.fkul8-1.fna.fbcdn.net/v/t31.0-8/478704_10201019692716026_397646576_o.jpg?oh=f0060376538a91e7110cde2b228d238f&oe=594093BF It's an Aprilia OEM part which I bought from AF1.
+Alex mercado I bought a China-made carbon fibre belly pan. There are a few online sellers; one of them is Motocomposites. It 's listed for Dorso but should fit Shiver as well. I used an oem bracket which I ordered from AF1 but you can use a custom bracket if on limited budget. www.motocomposites.com/products/belly-pan-in-100-carbon-fiber-for-aprilia-dorsoduro-750-1200.html
+Zaid Sern It's a Skidmarx rear hugger. They have GRP (fitted on my bike) and carbon versions (cool looking but expensive). www.intobikes.co.uk/products/002335/008731/Skidmarx-Rear-Hugger-suitable-for-Aprilia-Shiver-750-2012
haziq aiman Yes you can. A friend of mine fitted superbike like clip-ons and that transformed the feel and sitting position. Very much recline to the front... and ready to enjoy some twisty roads.
Andreas Krause Here is on eBay... www.ebay.ie/itm/Skidmarx-Rear-Hugger-Black-For-Aprilia-2011-SL-750-Shiver-RH18070102-/361027121659?hash=item540ee4b1fb:g:UT4AAOSwg3FUeVkY
I already changed the exhaust to Akrapovic and Leo Vince decat link pipe but am still running the standard ECU. There is Bazzaz piggyback ECU option available but it's quite expensive. Anyway for a daily ride, the stock tune is good enough. 😉
I bought it from a seller in UK many years ago. ⌛ I think you probably can find it in eBay if not mistaken but not all models can install the clear clutch cover. Please note that only the old Shiver models are applicable. ✌🏻😎
..pure awesomeness man!! I own a shiver and I have that smile like..always. My dream is to convert my bike to a factory one as well since Aprilia doesnt make for our model! That means a lot of cash here in Greece.. I have acrapo so far :D and some rizoma handle-parts!
Cheers bro
beautiful!! Plz tell me how you fixed the license plate? can you show me behind?
Probably the best motorcycle two cylinder on the market.
There isn't a factory or aprc verion of the shiver but it look very good.
Very impressive.
You're absolutely correct. ☺
Thanks , stay focused on the aprilia official site.
In june you will see me and my shiver Hannlee on wide magazine , On the road section !
Dang man nice upgrades
🤭 Many thanks mate. 🤪
Reaaaally nice work, man!
Thanks Radek. It's my work horse. 😊
Glad to know it puts a smile on your face when you ride it. Do you think it’s nimble and fun enough to ride to/from work daily?
Aprilia Shiver is definitely a fun bike. You can feel the torque in stop-go ride especially in urban area. 👍🏻 Change the stock battery to a lithium battery and it makes the bike lighter and more nimble. ✌🏻🏍
Thats nice workmanship on your Aprilia.
Thanks Garry. It's my daily ride... to work. ☺
You had an Aprilia shiver 750 I just got one 2009 Aprilia shiver 750 don't know how or if you can lower take off speed I put 1st gear let off clutch slowly and bike just takes off to fast without giving any throttle at all is yours like this How could I fix this?
Take the baffles out man!
Yeah I did that when I 1st fitted the cans. They sounded awesome but I was afraid the loudness may affect my hearing in the long run. 😂 I cut the baffles into half and put them in... so that's the compromise. Medium volume... 😃
Haha awesome! Removing the baffles was pretty much the first thing I did too. I always wear earplugs on longer trips anyway so hopefully I don't end up deaf. I sold the Shiver last year and now have a Tuono which is even louder so earplugs are a necessity but damn it sounds so good!
Tuono is an awesome bike and certainly a nice choice. I like it but I just don't want to let go my Shiver in order to get a Tuono V4. The Shiver is for me to keep...!
Michael Hutcheon I took the baffles out over a year ago and never turned back. Just love the noise...! 🔥😃
how long have you had this bike and how do you like it. im on a 599 hornet right now and am considering upgrading to this
how does the v twin motor feel vs an inline 4? thats what im most worried about
Oso 11 I ride it daily to office and it's awesome. Shiver doesn't have as much horsepower as the Japenese 4-inline but its torque is high and usable. 👍🏻 By the way I've had my bike since 2009. 😁
@@DesertGoon did you have any reliability isuses in those 10 years of owning the bike?
@AlK Vlogs The maintenance cost is for 4 bottles of oil (Shiver uses about 3.2 litres) and an oil filter. I DIY the periodic service so I save on labour charges. 🔧😁
@@TheBalija1 I didn't have any major issue in my Shiver ownership except once the air intake sensor (MAP) went kaput so it had to be replaced. 🤦♂️ I just searched and bought the part from eBay. 😄
I can recommend an ECU update! I've done it and do not recognize back the shiver !!!!
My ECU was not reflashen so that a new programmer bar geheigen ram had to be put into it .
For: Road Italy - LV Deact - DNA filter 80.3 72.7 NM - BHP at the rear .
After ECU flash : 90.0 BHP - 80.7 NM on the rear !!! : D
More info pls!!
Go to some one thats doing "rexxer tuning". Some ECU you can reflash, but mine not. The put a new RAM in thats was programmable. After that the make a file in the ECU thats fit on my bike whit the specifications. Then 7 runs on the dyno to get it like now..!!!!
+Hans Munster great thanks for the info!
WOW COOL VOLT GAUGE OHMERGAWD SO COOL!!!!!!!!!!!!!!!!!!!!!
It helps to monitor my battery and charging condition. At least I know if the battery needs recharge when the bike is not used for quite some time.
Sir, when can I get those antitheft screw/bolt for the calipers? And how much it will cost? KL/SEL region. Thanks
where did you get the carbon parts?
Aprilia Shiver 750 2008y.
Hello my friends. How much is the fuel consumption of Aprilia Shiver 750 2008y. I want to buy, do you recommend it consumption, quality, comotion? Thank you.
5l/100km with 140kmh
Shiver looks great. What rear fender is that? How did it mount? I want one but don't want to do any cutting or drilling. I have a grill guard to install on mine came out of England. I also like your lower belly fairing. I have seen them on ebay but the years stop at 2012 and mine is a 2013, any idea if they work? How was the install?
It's a Skidmarx rear fender and came the fitting kit (no need to do any modification). The belly pan is ABS-model design and I used an Aprilia ABS mounting bracket which I bought from AF1. It should fit a Shiver of any year model. ✌
So you need an extra bracket for that belly pan to mount? How is the install? I want one but not sure of the install process and don't want to drill or have to make things fit right. I have a 2013 non abs Shiver.
The bracket is plug and play and should fit your bike. It's quite easy to install the whole thing. scontent-kul1-1.xx.fbcdn.net/v/t1.0-9/73932_1711520349357_5434035_n.jpg?oh=efba55fd96153f2660d191d6f9c3a91f&oe=58EF4198
Where did you buy all of your upgrades from and do you still own the bike if you do have you had any troubles with it in the time you owned it thanks for this great detailed video!
Hi WW. 🙋🏻♂️ Thanks for the compliment mate. ✌🏻 Yes I still have it and am keeping the bike in my garage... although it's not ridden much these days. The bike is already over ten years old (2009 model) and has accumulated about 84k KMs. My upgrades were mostly for cosmetic only like carbon parts except for the exhaust which was for louder sound 💥 (road safety reason ⚠️). FYI, I bought the parts from various online sellers like eBay, AF1, European sources etc. My only major problem encountered was a faulty MAP sensor which caused the bike to get stranded at a roadside once. After it was replaced, they bike ran fine until today. 🏍️💨 Cheers. 😎
@@DesertGoon Didn't know about the reliability on aprilia's but that's sounds great! Thanks for the info man love the bike I might get one myself. Cheers! And ride safe
Nice bike man !👍
Question, hope you don't laugh about my ignorance......
What is that break lever protector called ? And why isn't there one mounted on the clutch side as well ?
Thanks Andree. It's called brake lever guard and is used and also mandated in MotoGP. However it's not compulsory for the clutch side. You can view this video to understand the reason for installing a brake lever guard. Ride safe...!
th-cam.com/video/CM4-cB_0Y_Q/w-d-xo.html
DesertGoon
Thanks for the reply and the link 👍
Hi! I want to ask you for the transparent clutch cover. Where did you buy it?
Hello. 🙋🏻♂️ I bought it from eBay but it only suits older Shiver model. Try searching for it there... ✌🏻😎
Can you please tell me what model windscreen that is
Hi. It's an Aprilia OEM windscreen for the first model Shiver. Originally my bike didn't come with any windscreen. www.apriliaforum.com/forums/showthread.php?182499-Shiver-windscreen
Cool! I'm very interesting in the Martris rear shock, how is damping setting? does it feel unconformable?
+bananamacaca It has compression and rebound settings. My setting is a little bit on the stiff side (but still comfortable for me) for better stability at undulating corners but it's just my preference. Anyone can set it to his liking (whichever he wishes).
Salut quel est ton sabot moteur , ton capot de selle et ton leche roue ? Merci
Bonjour. 🙋♂️ Mon ventre est standard pour le modèle ABS mais c'est une version carbone. La housse de capot de siège est de marque HLD que j'ai achetée sur eBay. 😎 #RideSafe
Nice protection for the clutch, where can I get one?
I believe you're referring to this part... www.apriliaforum.com/forums/attachment.php?attachmentid=322193&d=1480270496
You can get it from AF1 USA or corsameccanica.com/aprilia-clutch-case-protection-kit
Wow nice parts all. Really nice. Any thoughts of this bike so far?
+Evan Ong The bike is quite an all rounder. It suits many purposes, as a daily commuter, a weekend fun bike etc. Fairly nimble in handling. I've had it for about 6 years and generally it's trouble free.
bro...i noticed u installed the dna filter?..any changes in term of performance or feeling?. your comment much more appreciated. thanks
Yup DNA air filter. It gives a slight better performance in combination of a decat link pipe and Akra mufflers. Better intake and outlet...
If just a combination between akra and dna filter, do you think its worth it?
Yes still better than stock. 👍😃
Thank you bro
Salut tu saurais me dire où ta eu ton guidon ton capot de selle et ton sabot moteur merci d’avance
Salut. 🙋🏻♂️ J'ai acheté le fatbar LSL en ligne. Essayez de trouver celui qui vous convient ici ... www.louis.eu/katalog/marken/lsl-handlebars/92/460/340
Mon capot de siège arrière HLD a été acheté sur eBay. Pour le pan de ventre, je l'ai acheté de Chine. À votre santé. 😎
Would You say that it has too much Power for a starter bike? Also, do i rather buy this one, or Aprilla Dorsoduro?
I would say the power at 95hp is just fine for a beginner. If you ride in 'T' mode it won't bite you. 😃 Dorso seat position it higher a bit and its gearing is 16/46 stock compared to Shiver's 16/44. Imo Shiver is great for commuting... ✌
+DesertGoon I've heard that dorso is quite heavy for a supermoto, do You think so?
Ducati's equivalent bike for Dorso is most likely lighter. Here are the specs for Dorso... www.motorcyclespecs.co.za/model/aprilia/aprilia_sm_750_dorsoduro.htm
+DesertGoon Thanks Buddy! :)
+Smoke You're welcome mate.
mud guard tayar belakang tu mana boleh dapat...
hi bro, any advantage to install the decat?. my akra still with standard power boom. tq
Decat link pipe helps to reduce heat under the seat. It also increases exhaust sound because the gas flow is more direct. ✌☺
DesertGoon sound like a straight flow pipe. Do you think it can defect the engine on the long run?.😇
It shouldn't affect the engine... A catalytic converter is for reducing harmful gas (emission control) to the environment. ✌
Good friend. Excellent video!
Could you tell me that the dome model has been installed? @DesertGoon
Hi David. Your question wasn't clear... what did you mean by dome model? 🤔
Sweeeet, i have a shiver my own, what is that thing in the middle of your handle bars ? Is that for your phone, I am looking for a phone holder that is low profile ;) Ride safe but hard! - Little
+LittleBIG Riders Yes you're are absolutely right, it's a waterproof phone holder called Tigra Sport BikeConsole mount. :)
scontent-kul1-1.xx.fbcdn.net/hphotos-ash2/v/t1.0-9/1150263_10202799207122774_1592671358_n.jpg?oh=b70674bdd4bbd0cbfc9f60c41f903cb8&oe=56DFD763
fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/1528681_10202725769046868_944326619_n.jpg?oh=c0a0e3eed8c769a40bef819a123dfc12&oe=5713213D&__gda__=1460880870_1e65e54e8a7da5b0a112d3dd8479a1eb
Amazing :D It doesn't sound over the top, with DBKillers and DeCat :) I have Roadsitalia and thought about DeCat Arrow, but I was scared too much sound.
Hi Victor. In reality Akrapovic exhaust does sound nice and is not obnoxious to the listener. 👂🏻 I have removed the DB killer for a louder volume 🔥 so that drivers are aware of my presence near them (esp. at blind spots 👀). ✌🏻😎 #RoadSafety
@@DesertGoon Hahaha Thanks! I think is enoguh with my Roads with DBKiller,and DeCat Arrow. I thinking seriously in buy DeCat. #RoadSafety :)
Hello, what is this for a versesschutz on the right side
Are you referring to the frame slider on the chassis? If so, it's a LSL frame protector.
Hi, thanks for the quick response. But at the bottom of the clutch
Are you referring to this part...? scontent.fkul8-1.fna.fbcdn.net/v/t31.0-8/478704_10201019692716026_397646576_o.jpg?oh=f0060376538a91e7110cde2b228d238f&oe=594093BF
It's an Aprilia OEM part which I bought from AF1.
Do you have a idee where i the can buy part? Can not find anything on the internet
Where did you get the belly pan? I'm looking for something similar for my bike!
+Alex mercado I bought a China-made carbon fibre belly pan. There are a few online sellers; one of them is Motocomposites. It 's listed for Dorso but should fit Shiver as well. I used an oem bracket which I ordered from AF1 but you can use a custom bracket if on limited budget.
www.motocomposites.com/products/belly-pan-in-100-carbon-fiber-for-aprilia-dorsoduro-750-1200.html
PERFECT, thanks man! Appreciated.
From where did you get the rear hugger?
+Zaid Sern It's a Skidmarx rear hugger. They have GRP (fitted on my bike) and carbon versions (cool looking but expensive).
www.intobikes.co.uk/products/002335/008731/Skidmarx-Rear-Hugger-suitable-for-Aprilia-Shiver-750-2012
Really nice bike, congrats mate ! Where did you buy the Italian flag sticker on the seat cover ? Thx
Camille Joly Thanks mate. I bought it online from eBay. ✌🏻 You can search for Italian or Aprilia stickers there and pick one which you like. 😁
How tall are you man? I'm 194 and I'm looking for a bit taller bike this one seems quite tall...
Hi Ivan. 🙋🏻♂️ I'm only 165cm and tip toeing while saddling the Shiver. 😅
@@DesertGoon doesn't help me much 😂. Guess I'll just have to go and find one and ask for free ride 🤣
@@ivanduvnjakrose364 I think with your height, if you sit on the fuel tank you can still flat foot your feet on the ground. 😁
@@DesertGoon lol 😂😂
is it possible to use clip on, on this bike?
haziq aiman Yes you can. A friend of mine fitted superbike like clip-ons and that transformed the feel and sitting position. Very much recline to the front... and ready to enjoy some twisty roads.
DesertGoon great!! thanks mate
that seat concer were did u get it from
It's from HLD, Greece. You can search for it on eBay or try to get it from www.hld.gr/products/shiver-750-2/seat-cover/
What year is the bike?
Hi Kory. It's 2009 model. #RideSafe
Hello, what's this for a rear-guard?
I'm using a Skidmarx rear guard. They have carbon and fibre glass versions and mine is the later.
you can send the link where you can buy me maybe . thank you
Andreas Krause Here is on eBay... www.ebay.ie/itm/Skidmarx-Rear-Hugger-Black-For-Aprilia-2011-SL-750-Shiver-RH18070102-/361027121659?hash=item540ee4b1fb:g:UT4AAOSwg3FUeVkY
Andreas Krause From Intobikes UK... www.intobikes.co.uk/products/002335/008731/Skidmarx-Rear-Hugger-suitable-for-Aprilia-Shiver-750-2012
DesertGoon ggg
What is the highest speed you ever ride?I am waiting for the new Shiver 900
I've only tried 206kmh but some friends hit 225-230kmh...!
bos...mna nak dapt cover bawah enjin aprilia shiver tu
Bro boleh whatsap saya di no 017938116(kosong) untuk tempah cover bawah enjin dan mudguard tayar belakang. harga kita bincang di whasap
Yeah please contact Hazwan at the number given. ✌
Thank u bro DG for your recommendation :)
Never change silencer?Any Ecu upgrade or remap??
I already changed the exhaust to Akrapovic and Leo Vince decat link pipe but am still running the standard ECU. There is Bazzaz piggyback ECU option available but it's quite expensive. Anyway for a daily ride, the stock tune is good enough. 😉
tumpang tanye bro. dah berapa lama bro pakai motor ni? So far ada masalah tak?
I've been using my Shiver since Dec 2009; no major problem so far except a MAP sensor in airbox kaput.
Map sensor in airbox tu benda masalah normal atau masalah teruk?
The bike couldn't be started. Just replaced the sensor and all was back to normal.
Bro....abg dpt clear clutch cover tu kt mne
I bought it from a seller in UK many years ago. ⌛ I think you probably can find it in eBay if not mistaken but not all models can install the clear clutch cover. Please note that only the old Shiver models are applicable. ✌🏻😎
@@DesertGoon how much does it cost 😁
@@shkr2204 www.ebay.com/itm/Aprilia-Shiver-750-Clear-Clutch-Cover-Kit-08-12-Gold-Silver-Screws/132831239208?hash=item1eed5bdc28:g:BwsAAOSwouparDFh
cantik moto bang
Hafidz Musa Wow! 🤓 Hello hello... Who do we have here... the famous artist! ✌🏻😃
th-cam.com/video/dBMXBKABMls/w-d-xo.html
2:39
Hi. Starting the bike and you spotted the Matris forks...? 🤓
TNT600s father
楊燁 Yes you're right. TNT600 took a lot of cues from Aprilia Shiver...! 😃
tnt300ชัดๆ
บางที Benelli คัดลอกมาจาก Aprilia.
this is benelli tnt600...its a joke je
Hahahaa... you have a good sense of humour.
Shiver “Factory APRC” ha!!! That doesn’t exist in a Shiver, only in RSV4. How dumb is to call it like that?
It's got Factory and APRC stickers affixed to the bike... Anyway you didn't get the joke. 🤣
I understand it´s only stickers, that´s why I don´t see the joke. Nevermind.