Thank you Nejc! I just finished my first hand piece using your basic parameters, and it feels like it has really good action. Tomorrow's project is to sharpen my first graver and maybe even gouge up some metal! Thank you for sharing your experience. The DIY community owes you a debt of gratitude.
Beautiful work!! I have been running Steve Lindsay classis airgraver the past couple years and love it, man I love how you have done what you’ve done with your hand piece💯 sounds amazing!! I’m very inspired after watching this video!! Thanks for your knowledge and time!
Shaun Hughes Hand Engraving yess! it cuts really nice and a lot more power to this than the old handpiece that I started with at the beginning. I must confess that I was watching your videos on homemade machine and also the handpiece A LOT! :) many times over and Everytime I learned something new or spotted some little detail that I didn't see, hear, or thought the first time watching your videos. your videos really helped me a lot in my learning about the homemade machine in general an now I am learning about carbide. I haven't bought it yet as I am still doing my studying about it but hopefully I will soon. thank you Shaun for the great videos you make and hope you keep making them for many years to come. enjoy and have a lovely weekend. thanks for watching, cheers!
Nejc, what a beautifully made handpiece, really does look to be a professional job - and the sound it makes is just musical, testament to the quality of the build. Just beautiful - is there any chance you could send a copy of the drawings for making one of these?
Hey Bro does it matter where the 4- 2mm holes are placed on the hand piece top middle bottom? Or have to be exactly where piston hits the engraver collet?
I don't know if you are still checking the comments....but I would love the plans to build your handpiece! I really like the design and have been researching how to build a custom graver for awhile now..very nice. Sorry to ask youl...I'm sure you have sent a lot of plans out already, but if you have the time I sure would appreciate a copy! Thanks and keep making more vids
Thanks for the video.... Ive been using a foredom power graver but i think i need to up grade... Where did you get the slow pressure air release switch? 🤔
Big boom. Could you tell me which company made the handpiece for you? And if it's okay to also have the sketches and dimensions to follow. You are awesome!
what does your piston look like? I made a homemade machine and I had a chinese hand piece. The hand piece kept hanging up, then I figured out I had to dome the edges a little bit and it runs pretty good.
You can see how my piston looks like in the video. It has to be smooth on the surface and the inside of the piston chamber also has to be smooth for operating properly.
Yeah I watched it a while back, I will watch it again. Does the computer fan work well on cooling your unit? I want to hook one up but my machine doesn't require a bridge it has a plug in which I plug in a router speed control. So I want to take at least 4 fans mount them and then figure out how to get power to them, any ideas? Great videos by the way.
The fan works for me. Could blow a bit more but it's ok for now. I use it about an hour a day. If you want to connect many fans than get a seperate suply for that. Maybe ask a electrician or someone that knows electricity. i only know the basics about it. Thanks for the comment, Enjoy
CLIFTON MORGAN yess, you can view my previous videos on how i made mine, also i got ideas from Shaun Hughes look him up on TH-cam and you should get milions of ideas on how you can make it yourself. everybody does something different so try it yourself. Thanks for watching
CLIFTON MORGAN yess, you can view my previous videos on how i made mine, also i got ideas from Shaun Hughes look him up on TH-cam and you should get milions of ideas on how you can make it yourself. everybody does something different so try it yourself. Thanks for watching
Yes. I know. I did not say i invent it. I just show what i made for myself and everybody can see and make something like this. This video is just a vlog.
modified compresor, so the air is blowing/sucking. when piston in compresor goes up, the air blows. when piston of compresor goes down the air is sucked. look for Shaun Hughes video on diy engraving machine. he has a good video on how he makes this. Thanks for watching, enjoy
Thank you very much. Would you be so kind to send me the plans for an engraver like this? (I already own 2 grs chinese knockoffs) florin.chiuta@gmail.com
Very good!!!! Could you send me the plans and measurements? I want to do it right now! Thank you!! Muy bueno!!!! Podrias mandarme los plaos y medidas? Ya mismo lo quiero hacer!!! Muchas gracias!!
Thank you! i started this channel so everybody can learn about engraving. i also learn as i go. i will be making videos as things progress. Thanks for Watching. enjoy, greetings from Slovenija
HI Nejc, could you email me your design, cheers. Also as I commented on one of your other videos, you seem to have clamped the graver directly to the handpiece body, both of the commercial versions (as far as I can see) clamp the graver blank into a holder which is held loosely infront of the piston barrel via an O-ring. This means that the full force of the piston is directly passed into the forward motion of the graver (which is not being held) rather than being partially absorbed by the action of the hand holding. I think In your design the hand acts as the wall that reflects the energy back, but as the hand is soft it also absorbs some of the energy. The hand is also triyng to hold the handpiece and direct the graver around the design, so the two things are kind of acting against each other. Seperating the tool holder and having it floating at the front of the handpiece may make a difference. I'm still trying to get mine to work, so your doing way way better than me, but thats my two pennys worth, all the best.
Thanks for the info. I haven't tried this, but i will, and see how it goes. looking at it from science point of view it's probably a whole nother fizik level, but it seem to work like i made it. I can always improve it if i want to, so we'll see where it goes. Thanks for watching
Sehr schön gemacht. Toll bearbeitet! Können Sie mir bitte die Pläne vom Handwerkszeug schicken ? aihamghunim@iclould.com Liebe Grüße aus Deutschland und Vielen Dank
The low cost does not outweigh the quality and life of the counterfeit item; it is better to begin with a hammer and chisel or hand push methods than to waste resources on fraudulent equipment.
I can tell from your comment that you have not even watch my previous videos and you comment just because you have the need to make people do things you like. Live and let live or do your research before you hammer away with comments.
Very bad quality. I worked on this tool and it was terrible. After I bought the original grs and it was the best desicion. When u have business with chineese tools u should be ready to have ploblems and lose money
Thank you Nejc! I just finished my first hand piece using your basic parameters, and it feels like it has really good action. Tomorrow's project is to sharpen my first graver and maybe even gouge up some metal! Thank you for sharing your experience. The DIY community owes you a debt of gratitude.
Beautiful work!! I have been running Steve Lindsay classis airgraver the past couple years and love it, man I love how you have done what you’ve done with your hand piece💯 sounds amazing!! I’m very inspired after watching this video!! Thanks for your knowledge and time!
Really well made. I could tell from the noise that it would cut nice.
Shaun Hughes Hand Engraving yess! it cuts really nice and a lot more power to this than the old handpiece that I started with at the beginning. I must confess that I was watching your videos on homemade machine and also the handpiece A LOT! :) many times over and Everytime I learned something new or spotted some little detail that I didn't see, hear, or thought the first time watching your videos. your videos really helped me a lot in my learning about the homemade machine in general an now I am learning about carbide. I haven't bought it yet as I am still doing my studying about it but hopefully I will soon. thank you Shaun for the great videos you make and hope you keep making them for many years to come. enjoy and have a lovely weekend. thanks for watching, cheers!
Please can you send the plan and measurements for the machine - this is a great job you have done
Nejc, what a beautifully made handpiece, really does look to be a professional job - and the sound it makes is just musical, testament to the quality of the build. Just beautiful - is there any chance you could send a copy of the drawings for making one of these?
Its sooo Long ago. I dont have the plans anymore. Sorry, but thanks for your kind words.
Would it be too much trouble to ask you for the plans with the exact measurements? Thank you so much.
Hey Bro does it matter where the 4- 2mm holes are placed on the hand piece top middle bottom? Or have to be exactly where piston hits the engraver collet?
Very beautiful and professional piece, could you provide the buy link for chisel bits? please 🙏
I too can see and hear that You made a fine tool. Could I also trouble You for the plans.
Thanks for an excellent video.
have you sent me your email?
Does the compressed air come intermittently? Does it come continuously? If it comes intermittently, how do you ensure it?
Thank you so much. Your explanation and design is awesome. Can you please share any dimensions or sketches.
great project, could you send me the measurements of the project
NICE job! Is there any way you can post a link to a PDF of the drawings to make one?
I don't know if you are still checking the comments....but I would love the plans to build your handpiece! I really like the design and have been researching how to build a custom graver for awhile now..very nice. Sorry to ask youl...I'm sure you have sent a lot of plans out already, but if you have the time I sure would appreciate a copy! Thanks and keep making more vids
just starting out making my own gravers. Id be grateful if you could send me a drawing and dimension. Beautiful piece of work.
Thanks for the video.... Ive been using a foredom power graver but i think i need to up grade... Where did you get the slow pressure air release switch? 🤔
I really liked your video and you done a great job !!! thank you for sharing these all beautiful information with us )))
no problem, thank you, Thanks for watching
can you send me the dimensions if I ask you to help me to create one like that ?))) arthur_zambak@live.com
you got it, enjoy
thank you ! is this writen slovenian ? where are you from ? ))) nice to meet
from Slovenia
Where did you get your gravers?
Big boom. Could you tell me which company made the handpiece for you? And if it's okay to also have the sketches and dimensions to follow. You are awesome!
A private maker did this for me. you have to send me your email so i can send the drawings to you. Enjoy
Nejc Mazej melonn96@gmail.com
I sent it, enjoy
आप बोहत ही अच्छा काम कर रहे हैं मुझे यह कैसे मिल सकता है कृपया बताएं
wondering whether it effect the impact power by using grub to lock the collect instead of a friction fit...
Really impressive work, would love to try out and build one from your plans.Please if you share. Thanks.
where can I get the diagram to have the hand piece made?
спасибо за обзор. не понятно только. боёк ( ударник ) толкает воздух, плюс пружина, как он возвращается?
what does your piston look like? I made a homemade machine and I had a chinese hand piece. The hand piece kept hanging up, then I figured out I had to dome the edges a little bit and it runs pretty good.
You can see how my piston looks like in the video. It has to be smooth on the surface and the inside of the piston chamber also has to be smooth for operating properly.
Yeah I watched it a while back, I will watch it again. Does the computer fan work well on cooling your unit? I want to hook one up but my machine doesn't require a bridge it has a plug in which I plug in a router speed control. So I want to take at least 4 fans mount them and then figure out how to get power to them, any ideas? Great videos by the way.
The fan works for me. Could blow a bit more but it's ok for now. I use it about an hour a day. If you want to connect many fans than get a seperate suply for that. Maybe ask a electrician or someone that knows electricity. i only know the basics about it. Thanks for the comment, Enjoy
I've order before a set of grever with compressor but it didn't work
.. excuse me ,how many capacity air pump? Thk u
WOW !!! fantastic tool !!!
nice hand piece
Thank you, thanks for watching, enjoy!
I'm wanting to build a graver machine and hand peice any advice
CLIFTON MORGAN yess, you can view my previous videos on how i made mine, also i got ideas from Shaun Hughes look him up on TH-cam and you should get milions of ideas on how you can make it yourself. everybody does something different so try it yourself. Thanks for watching
CLIFTON MORGAN yess, you can view my previous videos on how i made mine, also i got ideas from Shaun Hughes look him up on TH-cam and you should get milions of ideas on how you can make it yourself. everybody does something different so try it yourself. Thanks for watching
I love Shaun Hughes work I've subscribed to him as well
What language are the plans in so I can get them translated? Thanks for sending them!!
Slovenian language
Very nice!! Could you please send me a copy of the plans/dimensions? Thanks for the video.
martinbodewell@web.de
You got it, Enjoy
Vielen Dank
could you please send me a copy of plans and details .
send me you email
Hi Nejc,
Not sure if you are still viewing these comments or still offering the plans for this build, however I would appreciate having them.
Would you buy my handpiece. Please send me email to nejc.mazej@gmail.com
very very nice ..awesome would love to have dimensions to make one.
how much the complete one?
is the air source pulsating or the handpiece work the same as pneumatic hammer -constant pressure ?
Pulsating... blowing /sucking. It's a modified compressor. Look at Shaun Hughes video on making a homemade machine
@@nejcmazej This system by Sergey Valtman (Сергей Вальтман) from Russia. He was constructed it in 2012.
Yes. I know. I did not say i invent it. I just show what i made for myself and everybody can see and make something like this. This video is just a vlog.
@@nejcmazej Nejc, please, send me a drawings of your handpiece. I will really appreciate that!
Hi, good night, how can you make a quick video by putting the proportion of the pieces of the burin thanks for your response
If you want drawings send me an email so i can send it
Thank you, I'll pass on imail if you can, detailing how to do it imail inhosolares@hotmail.com
are you using pulsating air or just a plain compressor ? (i don't understand if i could use it)
modified compresor, so the air is blowing/sucking. when piston in compresor goes up, the air blows. when piston of compresor goes down the air is sucked. look for Shaun Hughes video on diy engraving machine. he has a good video on how he makes this. Thanks for watching, enjoy
Thank you very much. Would you be so kind to send me the plans for an engraver like this? (I already own 2 grs chinese knockoffs) florin.chiuta@gmail.com
I sent it, enjoy
Can I ask, what is difference from GRS handpeice & Lindsay handpeice?
Thank you.
Very good!!!! Could you send me the plans and measurements? I want to do it right now! Thank you!! Muy bueno!!!! Podrias mandarme los plaos y medidas? Ya mismo lo quiero hacer!!! Muchas gracias!!
You got it. Enjoy
Yes well done I would love to have The dims o. It as well love the videos
Amigo:
¿Tienes algún plano técnico de ese modelo?
Hi,
does this handpiece work with plain pressure or are you using any kind of alternating positive negative pressure? kind regards
Yes modified compressor. Alternating suck/blow pressure. Watch other videos or Shaun Hughes channel for info on modification. Enjoy
Please make a video on how to modified a compressor@nejcmazej1129
Id like the info on having a hand piece made
I am using 8 letre compressor for engraving and set 5 pound pressure by air filter but graver did not work what will reason?
Handpiece needs minimum pressure and 8L is enough for engraving. Look closer at handpiece. The problem is likely there.
@@nejcmazej please give me your contact details I send video and photos
@@nejcmazej sir can you tell, how much need minimum and maximum set air pressure ?
Thank you for your good information
shopping link please
Are you still engraving?
Yes. But just here and there. I have a newborn son so i am limited with time
Nejc Mazej congrats, i have two little ones, they’re a hand full, but amazing!
Que potencial tem p compressa
do u have any drawings to share ? ;)
maybe a file?
very nice I will say it is a nice as the expensive ones for sale keep up the work
Thank you. i could make it "nicer" but its how it works not how it looks right :) Thanks for watching
how to put up in compresor?
Thank you so much ! I got everything.
oh I subscribed enjoy your channel good luck scott in east tn
Thank you! i started this channel so everybody can learn about engraving. i also learn as i go. i will be making videos as things progress. Thanks for Watching. enjoy, greetings from Slovenija
Hello. Great video!, can I also have a copy as everyone else, please?
send me email at... nejc.mazej@gmail.com
You've got email :)
@@nejcmazej email me the plans please kylelewis114@gmail.com thank you in advance.
Hello, please you how this tool made of?I also want a drawing or network connection to a?Thank you very much,
Please writte your e-mail so i can send it.
Can really?Thank you very much my email: zhouxinzi08@gmail.com
thank you
I sent the drawings by email. enjoy and thanks for watching
how do can I buy?
Sold already
where can I buy?
thanks for sharing,can u send me dimensions ?
stevanvlalukin@gmail.com
I sent it, Thanks for watching, Enjoy
Parabéns pelo trabalho e obrigado por compartilhar, você tem as medidas da ferramenta?
Olá amigo por gentileza vc desponibiliza o projeto do handpiece
Smart man thanks 👍
can you email me the sheet too? that would be a lot of help! Ill send you my finished project.
Come posso acquistare questo incisore pneumatico Grazie.
Non in vendita. Questo è l'unico esempio che ho fatto per me stesso. Grazie per l'aspetto. saluti
hi , i need sizes , please...
How much is this
Not for sale. Just demonstration of how it's made.
声音很清脆，再精致一些会非常好
HI Nejc, could you email me your design, cheers. Also as I commented on one of your other videos, you seem to have clamped the graver directly to the handpiece body, both of the commercial versions (as far as I can see) clamp the graver blank into a holder which is held loosely infront of the piston barrel via an O-ring. This means that the full force of the piston is directly passed into the forward motion of the graver (which is not being held) rather than being partially absorbed by the action of the hand holding. I think In your design the hand acts as the wall that reflects the energy back, but as the hand is soft it also absorbs some of the energy. The hand is also triyng to hold the handpiece and direct the graver around the design, so the two things are kind of acting against each other. Seperating the tool holder and having it floating at the front of the handpiece may make a difference. I'm still trying to get mine to work, so your doing way way better than me, but thats my two pennys worth, all the best.
Thanks for the info. I haven't tried this, but i will, and see how it goes. looking at it from science point of view it's probably a whole nother fizik level, but it seem to work like i made it. I can always improve it if i want to, so we'll see where it goes.
Thanks for watching
Ok ok thank s sir
Allem Respekt 👍👍👍👍
I don't have e-mail. Please resend the drawings again. Thanks!
how can I send you the file if you don't give me a email? I can't post it here..
n.todorov91@abv.bg
I sent it, Enjoy
Nejc Mazej Thank you !
Que potência tem compressor.
Este vídeo deveria ser traduzido e desenhado ficar mas EXPLICITO.
Not bad for the simplest engraving, but the professional tool is very far away.
Здравствуйте . Как бы получить подробный чертеж (d123gek@yandex.ru) Спасибо.
I sent it, Thanks for watching, Enjoy
Nejc Mazej where did you send it? please send it to my email
I did. didn't you get it? send me email to nejc.mazej@gmail.com
Sehr schön gemacht. Toll bearbeitet!
Können Sie mir bitte die Pläne vom Handwerkszeug schicken ?
aihamghunim@iclould.com
Liebe Grüße aus Deutschland und Vielen Dank
Thank you. Enjoy
ola sou do brasil eu sou seu fã e como eu compro esse material e quanto custa e esses desenho como eu posso ter meu studioaga@hotmail.com
You got it, Thanks, Enjoy
The low cost does not outweigh the quality and life of the counterfeit item; it is better to begin with a hammer and chisel or hand push methods than to waste resources on fraudulent equipment.
I can tell from your comment that you have not even watch my previous videos and you comment just because you have the need to make people do things you like. Live and let live or do your research before you hammer away with comments.
Fantastic garbage
Very bad quality. I worked on this tool and it was terrible. After I bought the original grs and it was the best desicion. When u have business with chineese tools u should be ready to have ploblems and lose money
Not chinese.. My own DIY project. Works ok and good for starter kit.