The amound of times that I have watched this video over the years to troubleshoot my 2017 MT 10 that I bought brand new is hilarious. Cannot thank you enought mate! Recently I developed a flashing cruise control light that occurs a few minutes after I start riding. I am OK with doing work on my cables, so after I will try my cleaning all the switches and readjusting everything I will DM you to purchase a few of your micro switches, should this is something that could help me with. I live in Scotland and I will ofcourse cover any cost. Many thanks again! It takes balls to help others in the community in the manner that you do! Hats off to you sir!
Thank you so much for this video, this helped me fix my problem which was the clutch sensor and lever not fully opening for 2 clicks. Your video was awesome to follow keep up the great work mate
many thanks for this mate my mt10 just come back from dealers new switch worked for 2 days and wet off again cleaned the pin on the back brake as best i could without taking anything off and hey ho seems to work now cheers
Great video where do you order the replacement switches from thought I ordered the correct switch all soldered in but the on/off is wrong way round so front brake light is constantly on 🤬
Great video, really helpful! I’ve narrowed it down to sticky pin on the rear brake switch, any advice for best product to lube with, or can you recommend where to get a replacement?
Got this issue on the 2022 now when changing the lever :( replaced it back with the original And still have this orange light flashing . Made sure all was tightened. Now at Yamaha :(
Top video mate! Mine sporadically has the cruise control light flash and I cannot turn it on. I am pretty sure it is the clutch, but I wondered if gunk in the ABS sensor can also be to blame?
Switched from stock levers too billet forged ASV shorty levers yesterday and this video helped a lot! Thanks for the help Chris! I was also curious as to what company/website you got your rear hugger? I love the look.
Currently going through the pain of my cruise control not working on my mt10 sp. Iv narrowed it down to my front brake switch. My front brake is sometimes leaving the rear brake light on so therefore the cruise control won’t activate as the bike thinks the brake is on. Ever heard of this happening mate? Well it’s off to Yamaha on Thursday so see what they say I guess. Cheers Ben
@@Cregtech thanks for the reply mate. After giving crescent Yamaha in verwood my reg they said the recall was done in January last year. I fitted the Gilles leavers but can still hear both clicks on the brake switch clearly so don’t think they have had an effect. May need another switch I suppose 🤷♂️
Your a legend for making this video I've been pulling my hair out on my 2016 mt 10 wondering why the cruise control light comes on but when I push set nothing happens just watching this video I went and looked at my front brake and seen the brembo logo on master cylinder and brake fluid pot so I pulled in and out my lever but only hear one click so what is it I need to buy from you I live in New Zealand by the way
So I was riding yesterday everything worked perfectly, today I go to press the button to turn it on and it turns on but when I go to set it, the button clicks but it won’t set today. It did rain yesterday, lmk what you think the issue is.
It'll be wet. Mines done it before in heavy rain. It'll usually dries and sorts itself out but may need the cover taken off and inspected. Also give it a clean with some contact cleaner.
Great video! 👍 really helpful 👌 I’m currently having the intermittent cancellation of the cruise control very annoying….. I’ve narrowed it down to the front brake switches, dealers are just so expensive 🤦♂️ If this is something your able to help out with that’ll be great 🤘
After taking my front oem switch apart, both micro switches seem to be working/clicking but the brake light one seems to be the cause for cruise control to start flashing. Is it still worth replacing the micro switches or is this something deeper in the electronics?
I bet the most common issue is trying to use cruise in gears 1-3.... CC only works in gears 4-6... Took me a while to figure that out. Thanks Owners Manual!
Hello, is there any communication software that can contact you? Currently there is a clutch switch, a side column switch, start, put in gear and turn off the engine. I have to ask you about related questions. My language is Chinese and I can only use a translator to communicate with you.
Purely just by looking at it. If you've got the switch as in my video and you've not got a reservoir fluid tank for the brake fluid then you've got stock brakes and almost 100% the original switch.
The plunger on my fz10 for the cruise control is broken so it's not sticking out, anyone know how can repair or replace that without having to buy everything
@@Cregtech .. sorry.. i told you ihave same problem with my super tenere... But really you are only one explain this problem Thanks from heart 💘😊... Again sorry for my broken language
@@Cregtech Moore Mafia is a company that test and tunes bikes builds the fastest bikes on the planet just was wondering if you had some of their products that was all I'm having them tune my MT-10 they have a channel if you're interested
My cruise control sucks,it works 1/20times ,I clean and check all switch, clean and lube the rear brake sensor(there is2 sensor behind back brake mastercylindre btw)
Only one at the back is for the cruise control, the other is the brake light. It may well be the button to turn it on on right hand switch gear. Take that apart and have a look at that switch. Look towards the end of my Self Cancelling Indicators video on how to take it all apart 👍🏼
@@Cregtechyeah right there is one for brake light and another the one for cruze control i try to hear all the switch contact works maybe something else we'll see after your video it will help us for sure🙌
Hello.....can anyone help please... My yamaha mt-10 has an issue with cruise control not working.light is flashing on dash..and engine management light on. There is a box under the seat right in front of the key hole but under the seat ( inside ) It is clicking. I took it apart and put it back together as the cogs weren't turning inside. That stopped the clicking but now the cruise control isn't working. Coincidence? Or is that the cruise Control regulator or whatever.. Any help please.
![PAANO BA MAG CRUISE CONTROL SA YAMAHA MT10 SP [ BASIC TUTORIAL ]](/img/n.gif)
The amound of times that I have watched this video over the years to troubleshoot my 2017 MT 10 that I bought brand new is hilarious. Cannot thank you enought mate! Recently I developed a flashing cruise control light that occurs a few minutes after I start riding. I am OK with doing work on my cables, so after I will try my cleaning all the switches and readjusting everything I will DM you to purchase a few of your micro switches, should this is something that could help me with. I live in Scotland and I will ofcourse cover any cost. Many thanks again! It takes balls to help others in the community in the manner that you do! Hats off to you sir!
Mate you should be wearing a cape in this video, you're a bloody hero!
Highly appreciate the work this took.
Thank you so much for this video, this helped me fix my problem which was the clutch sensor and lever not fully opening for 2 clicks. Your video was awesome to follow keep up the great work mate
I don't even have an MT10. Still found your video very informative.
many thanks for this mate my mt10 just come back from dealers new switch worked for 2 days and wet off again cleaned the pin on the back brake as best i could without taking anything off and hey ho seems to work now cheers
Your welcome. Share what I can to help others 👍🏼
Cracking video that, I'll work through these to see what's causing my cc to fail 👍
After changing the levers on mine.... No cruse control!!.. Watched this and result!.. All OK!... Many thanks
How you change it please
I solved the problem with the help of this video.
Thank you so much!
Great video where do you order the replacement switches from thought I ordered the correct switch all soldered in but the on/off is wrong way round so front brake light is constantly on 🤬
Very nice video Chris many thanks for sharing the info! Cheers
Thanx Chris time to fault find now I know what to look for
Great video, really helpful! I’ve narrowed it down to sticky pin on the rear brake switch, any advice for best product to lube with, or can you recommend where to get a replacement?
I just used a bit of GT85/WD40. I have now replaced mine with my hydraulic pressure switch box though.
Nice vid, been thinking about doing the brake upgrade.
Great vid, thanks Creg.
Got this issue on the 2022 now when changing the lever :( replaced it back with the original
And still have this orange light flashing . Made sure all was tightened. Now at Yamaha :(
Top video mate! Mine sporadically has the cruise control light flash and I cannot turn it on. I am pretty sure it is the clutch, but I wondered if gunk in the ABS sensor can also be to blame?
For me, it's the stop switch on the handbrake. 3 times it has gone bad on me
Great video! Thx for posting...
Switched from stock levers too billet forged ASV shorty levers yesterday and this video helped a lot! Thanks for the help Chris! I was also curious as to what company/website you got your rear hugger? I love the look.
Thanks. The hugger is from a chap called James Heddington. You contact him on FB...
facebook.com/james.hedington
Currently going through the pain of my cruise control not working on my mt10 sp. Iv narrowed it down to my front brake switch. My front brake is sometimes leaving the rear brake light on so therefore the cruise control won’t activate as the bike thinks the brake is on. Ever heard of this happening mate? Well it’s off to Yamaha on Thursday so see what they say I guess. Cheers Ben
Yep. Is a recall issue and new switch fitted.
@@Cregtech thanks for the reply mate. After giving crescent Yamaha in verwood my reg they said the recall was done in January last year. I fitted the Gilles leavers but can still hear both clicks on the brake switch clearly so don’t think they have had an effect. May need another switch I suppose 🤷♂️
Your a legend for making this video I've been pulling my hair out on my 2016 mt 10 wondering why the cruise control light comes on but when I push set nothing happens just watching this video I went and looked at my front brake and seen the brembo logo on master cylinder and brake fluid pot so I pulled in and out my lever but only hear one click so what is it I need to buy from you I live in New Zealand by the way
@@rossi675446 drop us a message at chris@cregtech.co.uk and we can link you the part you need.
Cheers.
There was a Yamaha recall for the brake switch
Yep. I think I mention that in the video.
Send us a link to your site. I'm considering a break updrage and may be interested in your mater cylinder/lever kit. Thx!
Not sure how I missed this Justin. If not found it already it's www.cregtech.co.uk
Ive got a problem with a Tracer 900gt, is it the same setup as the MT10?
Great videos ive done the r1 master cylinder swap but the micro switch has broke ,do you have spare leads or switches available thanks
Sorry for delay Chris. I do have some of the switches yes. You can get them on my new website www.cregtech.co.uk
So I was riding yesterday everything worked perfectly, today I go to press the button to turn it on and it turns on but when I go to set it, the button clicks but it won’t set today. It did rain yesterday, lmk what you think the issue is.
It'll be wet. Mines done it before in heavy rain. It'll usually dries and sorts itself out but may need the cover taken off and inspected. Also give it a clean with some contact cleaner.
Great video! 👍 really helpful 👌
I’m currently having the intermittent cancellation of the cruise control very annoying….. I’ve narrowed it down to the front brake switches, dealers are just so expensive 🤦♂️
If this is something your able to help out with that’ll be great 🤘
Yes it is, check out my store...
cregtech.co.uk/shop/ols/products/mt10-oem-brake-microswitch
Where did you get your seat ??
Seat is the standard seat with a custom cover from an Italian firm Volcano Industries. I have a vid with details and how to fit it.
Great video ....thank you mate .
After taking my front oem switch apart, both micro switches seem to be working/clicking but the brake light one seems to be the cause for cruise control to start flashing. Is it still worth replacing the micro switches or is this something deeper in the electronics?
Sorry for delayed reply. The two circuits are independent so the brake light switch shouldn't be affecting the cruise at all.
I bet the most common issue is trying to use cruise in gears 1-3.... CC only works in gears 4-6... Took me a while to figure that out. Thanks Owners Manual!
Hello, is there any communication software that can contact you? Currently there is a clutch switch, a side column switch, start, put in gear and turn off the engine. I have to ask you about related questions. My language is Chinese and I can only use a translator to communicate with you.
Visit my website www.cregtech.co.uk and message me through there.
Where can i buy these switches?
الله يجزاك خير
Just bought an 18 today and the CC doesn’t work. What’s the easiest way to tell if the previous owner did the brake upgrade?
Purely just by looking at it. If you've got the switch as in my video and you've not got a reservoir fluid tank for the brake fluid then you've got stock brakes and almost 100% the original switch.
The plunger on my fz10 for the cruise control is broken so it's not sticking out, anyone know how can repair or replace that without having to buy everything
شكرا جزيلا لك عندي نفس المشكله مع سوبر تنيري
Really sorry but I can't read that or copy it to try and translate either.
@@Cregtech .. sorry.. i told you ihave same problem with my super tenere... But really you are only one explain this problem Thanks from heart 💘😊... Again sorry for my broken language
@@fluttercourseshok1270 no need to apologise my friend. We're all from different parts of the world. Appreciate the kind words and glad it helped.
@@CregtechMay God bless you
is that a Moore Mafia sticker on your tank cover ?
It's not. And I don't know what that is either 😂
@@Cregtech Moore Mafia is a company that test and tunes bikes builds the fastest bikes on the planet just was wondering if you had some of their products that was all I'm having them tune my MT-10 they have a channel if you're interested
My cruise control sucks,it works 1/20times ,I clean and check all switch, clean and lube the rear brake sensor(there is2 sensor behind back brake mastercylindre btw)
Only one at the back is for the cruise control, the other is the brake light. It may well be the button to turn it on on right hand switch gear. Take that apart and have a look at that switch. Look towards the end of my Self Cancelling Indicators video on how to take it all apart 👍🏼
@@Cregtechyeah right there is one for brake light and another the one for cruze control i try to hear all the switch contact works maybe something else we'll see after your video it will help us for sure🙌
Hello.....can anyone help please...
My yamaha mt-10 has an issue with cruise control not working.light is flashing on dash..and engine management light on.
There is a box under the seat right in front of the key hole but under the seat ( inside )
It is clicking.
I took it apart and put it back together as the cogs weren't turning inside.
That stopped the clicking but now the cruise control isn't working.
Coincidence? Or is that the cruise Control regulator or whatever..
Any help please.
Hey I'd really love to buy the tiny micro switch from you for the front brake how can I go about ordering it
Head over to my website www.cregtech.co.uk and look under the CregTech product category 👍🏼
@@Cregtech hell yeah thank you man I hope you can ship to the US
@@TheBlueAtlas yep. Ship globally my friend.
يجب تغيير حساس الفرامل الاماميه وحساس الكلتش