How to create a respiratory mask using CATIA v5 Generative Surface Design
ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2020
- Using #CATIA v5 Generative Surface Design to model a #Respiratory #mask for 3D printing
Adjust the dimensions according to your needs.
This video tutorial presents a step by step method to create a model of a respiratory mask for 3D printing using CATIA v5 software.
Video tutorial by Ionuţ Ghionea (www.catia.ro), University Politehnica of Bucharest, Romania, Faculty of Industrial Engineering and Robotics (www.fiir.pub.ro)
CATIA Part Design Specialist
CATIA Champion
www.amazon.com/Catia-V5-Advan...
play.google.com/store/books/a...
Romania, April 2020
Cartea dumneavoastră care ați scris-o, este extraordinar de bine explicată 👍👍👍👍 mă ajută foarte mult..!
va multumesc !!
I tried drawing myself... it was really a good piece of work..thanks for sharing
muy buen tutorial salu2 desde México
Super 👍👍👍..!
Wahooo
Good model, unfortunately Catia is not that friendly with patterns alignment and multiplication.
Do you have a link to that drawing of the mask?
no, but stop the video and make the print screen, that drawing will be in a Romanian book of CATIA
Hi workbenchstuff,Ihave been following this can you make punch cavity video for this model plzzzzzzzzzzz bro......
this model is for 3D printing, but you can do it yourself, extracting the mask from a solid block
Hi Workbenchstuff, i have been following this video but I am stuck at 10min 41secs of the video by the way i can not get the dot at the end to coincidence. i believe its to do the the Project 3D elements, when i try this command it shows a box were as your video it does this automatically, also i see on your left hand parts list you have geometric set 1 were as mine does not have this in the parts list. any help would be appreciated, Craig
You can add the Geometrical Set from the Insert menu, it will store different elements like planes, curves, lines, points etc. Sorry for answering only for this question, I really can't answer all the questions asked by the TH-cam viewers. Please follow the videos again.
To answer about that dot: if you just can't select the dot, try to hide the yellow projected line (right click on it then select the Hide option). The dot should remain alone ready to be selected.
@@workbenchstuff THATS right, i had the same problem but hiding the yellow line I fixed the problem, by the way excellent videos, thanks for sharing!
Can you please mention the units for the drawing.
milimeters, of course
Need more video.example life application product
there are some good parts within my video tutorials, pls check the playlist
what happen to the rest of the video i only have half the pattern
it was a repetitive task, too boring to display, so I've cut that part of the video, I really think you can do the rest of the pattern by yourself :)
You can pattern according to this video also th-cam.com/video/QFtUkWoe4G4/w-d-xo.html
Commentary would be nice…😅
while switching from surface to part modeling I am neither able to select several operations ....nor edge
fillet